raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-06 18:09:56 +00:00
Code Issues Projects Releases Wiki Activity

media: i2c: imx219: Fix power sequence

Browse Source 
Commit ca45448a56 upstream.

When supporting Rpi Camera v2 Module on the RZ/G2E, found the driver had
some issues with rcar mipi-csi driver. The sensor never entered into LP-11
state.

The powerup sequence in the datasheet[1] shows the sensor entering into
LP-11 in streaming mode, so to fix this issue transitions are performed
from "streaming -> standby" in the probe() after power up.

With this commit the sensor is able to enter LP-11 mode during power up,
as expected by some CSI-2 controllers.

[1] https://publiclab.org/system/images/photos/000/023/294/original/
RASPBERRY_PI_CAMERA_V2_DATASHEET_IMX219PQH5_7.0.0_Datasheet_XXX.PDF

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This commit is contained in:
Lad Prabhakar
2020-03-10 14:17:07 +01:00
committed by popcornmix
parent 89420883b8
commit 1a5041293e
1 changed files with 17 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/media/i2c/imx219.c
View File

@@ -1224,6 +1224,23 @@ static int imx219_probe(struct i2c_client *client)
/* Set default mode to max resolution */
imx219->mode = &supported_modes[0];
/* sensor doesn't enter LP-11 state upon power up until and unless
* streaming is started, so upon power up switch the modes to:
* streaming -> standby
*/
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STREAMING);
if (ret < 0)
goto error_power_off;
usleep_range(100, 110);
/* put sensor back to standby mode */
ret = imx219_write_reg(imx219, IMX219_REG_MODE_SELECT,
IMX219_REG_VALUE_08BIT, IMX219_MODE_STANDBY);
if (ret < 0)
goto error_power_off;
usleep_range(100, 110);
ret = imx219_init_controls(imx219);
if (ret)
goto error_power_off;