raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-06 10:00:17 +00:00
Code Issues Projects Releases Wiki Activity

overlays: balenaFin v1.1.0 carrier board update

Browse Source 
A backward compatible update for the balenaFin carrier board for the
Raspberry Pi Compute Module 3/3+ Lite.

The updated overlay includes:
  * support for the newly introduced RGB LEDs
  * i2c-gpio and SDIO improvements
  * DT based Marvell 88W8887 configuration

Signed-off-by: Zahari Petkov <zahari@balena.io>
This commit is contained in:
Zahari Petkov
2019-02-08 13:03:38 +02:00
committed by popcornmix
parent 724a2307f8
commit 20f243e305
2 changed files with 45 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/overlays/README
View File

@@ -472,7 +472,7 @@ Params: swap_lr Reverse the channel allocation, which will also
Name: balena-fin
Info: Overlay that enables WiFi, Bluetooth and the GPIO expander on the
Balena Fin board.
balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite.
Load: dtoverlay=balena-fin
Params: <None>

46
arch/arm/boot/dts/overlays/balena-fin-overlay.dts
View File

@@ -11,6 +11,7 @@
pinctrl-0 = <&sdio_pins>;
bus-width = <4>;
brcm,overclock-50 = <35>;
non-removable;
status = "okay";
};
};
@@ -34,7 +35,8 @@
fragment@2 {
target-path = "/";
__overlay__ {
// We should investigate how to switch to mmc-pwrseq-sd8787
// We should switch to mmc-pwrseq-sd8787 after making it
// compatible with sd8887
// Currently that module requires two GPIOs to function since it
// targets a slightly different chip
power_ctrl: power_ctrl {
@@ -46,10 +48,21 @@
i2c_soft: i2c@0 {
compatible = "i2c-gpio";
gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
i2c-gpio,delay-us = <5>;
i2c-gpio,scl-open-drain;
i2c-gpio,sda-open-drain;
#address-cells = <1>;
#size-cells = <0>;
};
sd8xxx-wlan {
drvdbg = <0x6>;
drv_mode = <0x1>;
cfg80211_wext = <0xf>;
sta_name = "wlan";
wfd_name = "p2p";
cal_data_cfg = "none";
};
};
};
@@ -74,6 +87,35 @@
reg = <0x68>;
status = "okay";
};
// RGB LEDs (>= v1.1.0)
pca9633: pca9633@62 {
compatible = "nxp,pca9633";
reg = <0x62>;
#address-cells = <1>;
#size-cells = <0>;
red@0 {
label = "red";
reg = <0>;
linux,default-trigger = "none";
};
green@1 {
label = "green";
reg = <1>;
linux,default-trigger = "none";
};
blue@2 {
label = "blue";
reg = <2>;
linux,default-trigger = "none";
};
unused@3 {
label = "unused";
reg = <3>;
linux,default-trigger = "none";
};
};
};
};
};