raspi/linux
1
0
Fork 1
mirror of https://github.com/raspberrypi/linux.git synced 2025-12-06 10:00:17 +00:00
Code Issues Projects Releases Wiki Activity

regulator/rpi-panel: Remove the ID read

Browse Source 
Reading from the Atmel has always been troublesome due to
clock stretching, and the driver does nothing with it anyway.

Remove the read and assume that if the overlay has been
configured (most likely through the firmware autodetection)
that the hardware is present.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
This commit is contained in:
Dave Stevenson
2024-09-20 18:32:11 +01:00
committed by Dom Cobley
parent 86a08f5538
commit 24f65f3906
1 changed files with 0 additions and 50 deletions
Download Patch File Download Diff File Expand all files Collapse all files

50
drivers/regulator/rpi-panel-attiny-regulator.c
View File

@@ -229,39 +229,6 @@ static void attiny_gpio_set(struct gpio_chip *gc, unsigned int off, int val)
mutex_unlock(&state->lock);
}
static int attiny_i2c_read(struct i2c_client *client, u8 reg, unsigned int *buf)
{
struct i2c_msg msgs[1];
u8 addr_buf[1] = { reg };
u8 data_buf[1] = { 0, };
int ret;
/* Write register address */
msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = ARRAY_SIZE(addr_buf);
msgs[0].buf = addr_buf;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (ret != ARRAY_SIZE(msgs))
return -EIO;
usleep_range(5000, 10000);
/* Read data from register */
msgs[0].addr = client->addr;
msgs[0].flags = I2C_M_RD;
msgs[0].len = 1;
msgs[0].buf = data_buf;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
if (ret != ARRAY_SIZE(msgs))
return -EIO;
*buf = data_buf[0];
return 0;
}
/*
* I2C driver interface functions
*/
@@ -273,7 +240,6 @@ static int attiny_i2c_probe(struct i2c_client *i2c)
struct regulator_dev *rdev;
struct attiny_lcd *state;
struct regmap *regmap;
unsigned int data;
int ret;
state = devm_kzalloc(&i2c->dev, sizeof(*state), GFP_KERNEL);
@@ -291,22 +257,6 @@ static int attiny_i2c_probe(struct i2c_client *i2c)
goto error;
}
ret = attiny_i2c_read(i2c, REG_ID, &data);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read REG_ID reg: %d\n", ret);
goto error;
}
switch (data) {
case 0xde: /* ver 1 */
case 0xc3: /* ver 2 */
break;
default:
dev_err(&i2c->dev, "Unknown Atmel firmware revision: 0x%02x\n", data);
ret = -ENODEV;
goto error;
}
regmap_write(regmap, REG_POWERON, 0);
msleep(30);
regmap_write(regmap, REG_PWM, 0);