mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-06 10:00:17 +00:00
arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board
This is a rk3566 tv box evaluation demo board. Specification: - Rockchip RK3566 - DDR4 4GB - TF sd scard slot - eMMC - AP6398S for WiFi + BT - Gigabit ethernet - HDMI out - USB HOST 2.0 x 2 - USB 3.0 x 1 - USB OTG 2.0 x 1 - 12V DC Power supply Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20221105100012.958252-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Andy Yan
Heiko Stuebner
@@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
||||
|
||||
503
arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
Normal file
503
arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
Normal file
@@ -0,0 +1,503 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/*
|
||||
* Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com
|
||||
* Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3566 BOX DEMO Board";
|
||||
compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdmmc1;
|
||||
mmc2 = &sdhci;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gmac1_clkin: external-gmac1-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac1_clkin";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&ir_int>;
|
||||
linux,rc-map-name = "rc-beelink-gs1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_work: led-0 {
|
||||
gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_work_en>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
status = "okay";
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h &wifi_32k>;
|
||||
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
spdif_dit: spdif-dit {
|
||||
compatible = "linux,spdif-dit";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
spdif_sound: spdif-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "SPDIF";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&spdif>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&spdif_dit>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v0_dcin: regulator-vcc12v0-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v0_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v0_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc12v0_dcin>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb2_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcca_1v8: regulator-vcca-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vdda_0v9: regulator-vdda-0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vdd_fixed: regulator-vdd-fixed {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_fixed";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_cpu: regulator-vdd-cpu {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0 0 5000 1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
pwm-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_logic: regulator-vdd-logic {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 1>;
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
pwm-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus
|
||||
&gmac1m1_clkinout>;
|
||||
snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 20000 100000>;
|
||||
|
||||
tx_delay = <0x4f>;
|
||||
rx_delay = <0x2d>;
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
assigned-clocks = <&cru CLK_HDMI_CEC>;
|
||||
assigned-clock-rates = <32768>;
|
||||
avdd-0v9-supply = <&vdda_0v9>;
|
||||
avdd-1v8-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_in {
|
||||
hdmi_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_out {
|
||||
hdmi_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1_8ch {
|
||||
rockchip,trcm-sync-tx-only;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_32k: wifi-32k {
|
||||
rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
ir {
|
||||
ir_int: ir-int {
|
||||
rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
led {
|
||||
led_work_en: led_work_en {
|
||||
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||||
status = "okay";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&pmucru CLK_RTC_32K>;
|
||||
clock-names = "ext_clock";
|
||||
device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
&vpu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vdpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
vbus-supply = <&vcc5v0_usb2_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user