mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-06 01:49:46 +00:00
arm64: dts: qcom: Add support for Xiaomi Poco F1 (Beryllium)
Add initial dts support for Xiaomi Poco F1 (Beryllium).
This initial support is based on upstream Dragonboard 845c
(sdm845) device. With this dts, Beryllium boots AOSP up to
ADB shell over USB-C.
Supported functionality includes UFS, USB-C (peripheral),
microSD card and Vol+/Vol-/power keys. Bluetooth should work
too but couldn't be verified from adb command line, it is
verified when enabled from UI with few WIP display patches.
Just like initial db845c support, initializing the SMMU is
clearing the mapping used for the splash screen framebuffer,
which causes the device to hang during boot and recovery
needs a hard power reset. This can be worked around using:
fastboot oem select-display-panel none
To switch ON the display back run:
fastboot oem select-display-panel
But this only works on Beryllium devices running bootloader
version BOOT.XF.2.0-00369-SDM845LZB-1 that shipped with
Android-9 based release. Newer bootloader version do not
support switching OFF the display panel at all.
Reviewed-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/1599840940-18144-1-git-send-email-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Amit Pundir
committed by
Bjorn Andersson
Bjorn Andersson
parent
0a4fd091cf
commit
77809cf74a
@@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
|
||||
|
||||
380
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
Normal file
380
arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
Normal file
@@ -0,0 +1,380 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sdm845.dtsi"
|
||||
#include "pm8998.dtsi"
|
||||
#include "pmi8998.dtsi"
|
||||
|
||||
/*
|
||||
* Delete following upstream (sdm845.dtsi) reserved
|
||||
* memory mappings which are different in this device.
|
||||
*/
|
||||
/delete-node/ &tz_mem;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &mpss_region;
|
||||
/delete-node/ &venus_mem;
|
||||
/delete-node/ &cdsp_mem;
|
||||
/delete-node/ &mba_region;
|
||||
/delete-node/ &slpi_mem;
|
||||
/delete-node/ &spss_mem;
|
||||
/delete-node/ &rmtfs_mem;
|
||||
|
||||
/ {
|
||||
model = "Xiaomi Pocophone F1";
|
||||
compatible = "xiaomi,beryllium", "qcom,sdm845";
|
||||
|
||||
/* required for bootloader to select correct board */
|
||||
qcom,board-id = <69 0>;
|
||||
qcom,msm-id = <321 0x20001>;
|
||||
|
||||
aliases {
|
||||
hsuart0 = &uart6;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vol_up_pin_a>;
|
||||
|
||||
vol-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Reserved memory changes from downstream */
|
||||
reserved-memory {
|
||||
tz_mem: memory@86200000 {
|
||||
reg = <0 0x86200000 0 0x4900000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: memory@8c500000 {
|
||||
reg = <0 0x8c500000 0 0x1e00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: memory@8e300000 {
|
||||
reg = <0 0x8e300000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mpss_region: memory@8e400000 {
|
||||
reg = <0 0x8e400000 0 0x7800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: memory@95c00000 {
|
||||
reg = <0 0x95c00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: memory@96100000 {
|
||||
reg = <0 0x96100000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: memory@96900000 {
|
||||
reg = <0 0x96900000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: memory@96b00000 {
|
||||
reg = <0 0x96b00000 0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
spss_mem: memory@97f00000 {
|
||||
reg = <0 0x97f00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
rmtfs_mem: memory@f6301000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0 0xf6301000 0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: vreg-s4a-1p8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&adsp_pas {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/sdm845/adsp.mdt";
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
pm8998-rpmh-regulators {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vreg_l1a_0p875: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5a_0p8: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_2p95: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p3: ldo17 {
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20a_2p95: ldo20 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2968000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21a_2p95: ldo21 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2968000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l24a_3p075: ldo24 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l25a_3p3: ldo25 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l26a_1p2: ldo26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cdsp_pas {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/sdm845/cdsp.mdt";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<GCC_LPASS_Q6_AXI_CLK>,
|
||||
<GCC_LPASS_SWAY_CLK>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/sdm845/a630_zap.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&mss_pil {
|
||||
status = "okay";
|
||||
firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt";
|
||||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
vol_up_pin_a: vol-up-active {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_pon {
|
||||
resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
|
||||
|
||||
vmmc-supply = <&vreg_l21a_2p95>;
|
||||
vqmmc-supply = <&vreg_l13a_2p95>;
|
||||
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
|
||||
sdc2_default_state: sdc2-default {
|
||||
clk {
|
||||
pins = "sdc2_clk";
|
||||
bias-disable;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
cmd {
|
||||
pins = "sdc2_cmd";
|
||||
bias-pull-up;
|
||||
drive-strength = <10>;
|
||||
};
|
||||
|
||||
data {
|
||||
pins = "sdc2_data";
|
||||
bias-pull-up;
|
||||
drive-strength = <10>;
|
||||
};
|
||||
};
|
||||
|
||||
sdc2_card_det_n: sd-card-det-n {
|
||||
pins = "gpio126";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3990-bt";
|
||||
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l17a_1p3>;
|
||||
vddch0-supply = <&vreg_l25a_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <800000>;
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l26a_1p2>;
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
status = "okay";
|
||||
|
||||
vdd-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l26a_1p2>;
|
||||
vdda-pll-supply = <&vreg_l1a_0p875>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
};
|
||||
|
||||
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
|
||||
|
||||
&qup_uart6_default {
|
||||
pinmux {
|
||||
pins = "gpio45", "gpio46", "gpio47", "gpio48";
|
||||
function = "qup6";
|
||||
};
|
||||
|
||||
cts {
|
||||
pins = "gpio45";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rts-tx {
|
||||
pins = "gpio46", "gpio47";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx {
|
||||
pins = "gpio48";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user