mirror of
https://github.com/raspberrypi/linux.git
synced 2025-12-06 10:00:17 +00:00
arm64: dts: meson-gxl: add support for JetHub H1
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB LPDDR4 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in
This commit is contained in:
Vyacheslav Bocharov
committed by
Neil Armstrong
Neil Armstrong
parent
a1732cca0e
commit
abfaae24ec
@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
|
||||
|
||||
@@ -0,0 +1,241 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
|
||||
* Copyright (c) 2020 JetHome
|
||||
* Author: Aleksandr Kazantsev <ak@tvip.ru>
|
||||
* Author: Alexey Shevelkin <ash@tvip.ru>
|
||||
* Author: Vyacheslav Bocharov <adeep@lexina.in>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-gxl.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
|
||||
model = "JetHome JetHub J80";
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
linux,cma {
|
||||
size = <0x0 0x1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO; /* Console */
|
||||
serial1 = &uart_A; /* Bluetooth */
|
||||
serial2 = &uart_AO_B; /* Wireless module 1 */
|
||||
serial3 = &uart_C; /* Wireless module 2 */
|
||||
ethernet0 = ðmac;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
vddio_ao18: regulator-vddio_ao18 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_AO18";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddio_boot: regulator-vddio_boot {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDIO_BOOT";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
};
|
||||
|
||||
&efuse {
|
||||
bt_mac: bt_mac@6 {
|
||||
reg = <0x6 0x6>;
|
||||
};
|
||||
|
||||
wifi_mac: wifi_mac@C {
|
||||
reg = <0xc 0x6>;
|
||||
};
|
||||
};
|
||||
|
||||
&sn {
|
||||
reg = <0x32 0x20>;
|
||||
};
|
||||
|
||||
ð_mac {
|
||||
reg = <0x0 0x6>;
|
||||
};
|
||||
|
||||
&bid {
|
||||
reg = <0x12 0x20>;
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clkc CLKID_FCLK_DIV4>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddio_ao18>;
|
||||
};
|
||||
|
||||
/* Wireless SDIO Module */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power to be kept while in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <50000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
disable-wp;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vddio_boot>;
|
||||
};
|
||||
|
||||
/* Console UART */
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
/* S905W only has access to its internal PHY */
|
||||
ðmac {
|
||||
status = "okay";
|
||||
phy-mode = "rmii";
|
||||
phy-handle = <&internal_phy>;
|
||||
};
|
||||
|
||||
&internal_phy {
|
||||
status = "okay";
|
||||
pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
};
|
||||
|
||||
&uart_C {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_c_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&uart_AO_B {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
};
|
||||
|
||||
&i2c_B {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c_b_pins>;
|
||||
|
||||
pcf8563: pcf8563@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
Reference in New Issue
Block a user