fixup! BCM2708: Add core Device Tree support

arch/arm/boot/dts/broadcom/bcm63138.dtsi

@@ -184,13 +184,69 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
+		ranges = <0 0xfffe8000 0x10000>;
 
 		timer: timer@80 {
 			compatible = "brcm,bcm6328-timer", "syscon";
 			reg = <0x80 0x3c>;
 		};
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
@@ -209,6 +265,14 @@
 			status = "disabled";
 		};
 
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -248,6 +312,19 @@
 			reg = <0x8000 0x50>;
 		};
 
+		pl081_dma: dma-controller@d000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0xd000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		reboot {
 			compatible = "syscon-reboot";
 			regmap = <&timer>;

arch/arm/boot/dts/broadcom/bcm63148.dtsi

@@ -99,6 +99,62 @@
 		#size-cells = <1>;
 		ranges = <0 0xfffe8000 0x8000>;
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		uart0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x20>;
@@ -108,6 +164,14 @@
 			status = "disabled";
 		};
 
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/broadcom/bcm63178.dtsi

@@ -117,6 +117,97 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -143,6 +234,27 @@
 			};
 		};
 
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;

arch/arm/boot/dts/broadcom/bcm6846.dtsi

@@ -196,6 +196,7 @@
 		rng@b80 {
 			compatible = "brcm,iproc-rng200";
 			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		leds: led-controller@800 {

arch/arm/boot/dts/broadcom/bcm6855.dtsi

@@ -116,6 +116,103 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -143,6 +240,27 @@
 			};
 		};
 
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
@@ -151,5 +269,14 @@
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm6878.dtsi

@@ -108,6 +108,111 @@
 		#size-cells = <1>;
 		ranges = <0 0xff800000 0x800000>;
 
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,10 +239,23 @@
 			};
 		};
 
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&uart_clk>, <&uart_clk>;
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";

arch/arm/boot/dts/broadcom/bcm7445.dtsi

@@ -237,7 +237,8 @@
 			ranges = <0x0 0x0 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -259,7 +260,8 @@
 			ranges = <0x0 0x80000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -281,7 +283,8 @@
 			ranges = <0x0 0x100000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 

arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi

@@ -17,21 +17,21 @@
 		led-1 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_RED>;
-			pwms = <&pwm 1 50000>;
+			pwms = <&pwm 1 50000 0>;
 			max-brightness = <255>;
 		};
 
 		led-2 {
 			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
-			pwms = <&pwm 2 50000>;
+			pwms = <&pwm 2 50000 0>;
 			max-brightness = <255>;
 		};
 
 		led-3 {
 			function = LED_FUNCTION_INDICATOR;
 			color = <LED_COLOR_ID_BLUE>;
-			pwms = <&pwm 3 50000>;
+			pwms = <&pwm 3 50000 0>;
 			max-brightness = <255>;
 		};
 	};
@@ -132,7 +132,6 @@
 
 &pwm {
 	status = "okay";
-	#pwm-cells = <2>;
 };
 
 &uart0 {

arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi

@@ -323,11 +323,12 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x00 0x00 0xff800000 0x3000>;
+		ranges = <0x00 0x00 0xff800000 0x400000>;
 
 		twd: timer-mfd@400 {
 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
@@ -348,13 +349,103 @@
 			};
 		};
 
-		gpio0: gpio-controller@500 {
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
 			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x528 0x04>;
 			reg-names = "dirout", "dat";
-			reg = <0x500 0x28>, <0x528 0x28>;
-
-			#gpio-cells = <2>;
 			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x540 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x544 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 256 .. 287 */
+		gpio8: gpio@520 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x520 0x04>, <0x548 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 288 .. 319 */
+		gpio9: gpio@524 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x524 0x04>, <0x54c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
 		};
 
 		pinctrl@560 {
@@ -584,6 +675,12 @@
 			#size-cells = <0>;
 		};
 
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -636,6 +733,19 @@
 				#reset-cells = <1>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 
 	reboot {

arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright 2022 Broadcom Ltd.
+ * This DTSI is for the B0 and later revision of the SoC
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -125,6 +126,101 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0xff800000 0x800000>;
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -151,6 +247,21 @@
 			};
 		};
 
+		/* B0 AHB Peripherals */
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		/* B0 ARM UART Peripheral block */
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;
@@ -159,5 +270,23 @@
 			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@14000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x14000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
 	};
 };

arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi

@@ -93,11 +93,103 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x800000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
 
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
@@ -108,6 +200,29 @@
 			status = "disabled";
 		};
 
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -133,5 +248,18 @@
 				reg = <0>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };

arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi

@@ -111,11 +111,12 @@
 		};
 	};
 
+	/* PERF Peripherals */
 	bus@ff800000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0x0 0x0 0xff800000 0x62000>;
+		ranges = <0x0 0x0 0xff800000 0x400000>;
 
 		twd: timer-mfd@400 {
 			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
@@ -136,6 +137,86 @@
 			};
 		};
 
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x18>;
@@ -145,6 +226,29 @@
 			status = "disabled";
 		};
 
+		uart1: serial@660 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x660 0x18>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		hsspi: spi@1000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -170,5 +274,18 @@
 				reg = <0>;
 			};
 		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
 	};
 };

arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi

@@ -367,7 +367,6 @@
 
 			v2m0: v2m@0 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x00000 0x1000>;
 				arm,msi-base-spi = <72>;
@@ -376,7 +375,6 @@
 
 			v2m1: v2m@10000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x10000 0x1000>;
 				arm,msi-base-spi = <88>;
@@ -385,7 +383,6 @@
 
 			v2m2: v2m@20000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x20000 0x1000>;
 				arm,msi-base-spi = <104>;
@@ -394,7 +391,6 @@
 
 			v2m3: v2m@30000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x30000 0x1000>;
 				arm,msi-base-spi = <120>;
@@ -403,7 +399,6 @@
 
 			v2m4: v2m@40000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x40000 0x1000>;
 				arm,msi-base-spi = <136>;
@@ -412,7 +407,6 @@
 
 			v2m5: v2m@50000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x50000 0x1000>;
 				arm,msi-base-spi = <152>;
@@ -421,7 +415,6 @@
 
 			v2m6: v2m@60000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x60000 0x1000>;
 				arm,msi-base-spi = <168>;
@@ -430,7 +423,6 @@
 
 			v2m7: v2m@70000 {
 				compatible = "arm,gic-v2m-frame";
-				interrupt-parent = <&gic>;
 				msi-controller;
 				reg = <0x70000 0x1000>;
 				arm,msi-base-spi = <184>;