commit 4739d88ad8 upstream.
msm_routing_put_audio_mixer() can return incorrect value in various scenarios.
scenario 1:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 0 instead of 1 eventhough value was changed
scenario 2:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
return value is 1 instead of 0 eventhough the value was not changed
scenario 3:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 1 instead of 0 eventhough the value was not changed
Fix this by adding checks, so that change notifications are sent correctly.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 861afeac79 ]
Stream IDs are reused across multiple BackEnd mixers, do not reset the
stream mixers if they are not already set for that particular FrontEnd.
Ex:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below
command will reset previously setup MultiMedia1 stream, because both of them
are using MultiMedia1 PCM stream.
amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0
reset the FrontEnd Mixers conditionally to fix this issue.
This is more noticeable in desktop setup, where in alsactl tries to restore
the alsa state and overwriting the previous mixer settings.
Fixes: e3a33673e8 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211116114721.12517-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e681b1a6d7 ]
Had a typo in lpass platform driver that resulted in crash
during suspend/resume with an HDMI dongle connected.
The regmap read/write/volatile regesters validation callbacks in lpass-cpu
were using MI2S rdma_channels count instead of hdmi_rdma_channels.
This typo error causing to read registers from the regmap beyond the length
of the mapping created by ioremap().
This fix avoids the need for reducing number hdmi_rdma_channels,
which is done in
commit 7dfe20ee92 ("ASoC: qcom: Fix number of HDMI RDMA channels on sc7180").
So reverting the same.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20210202062727.22469-1-srivasam@codeaurora.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c28377b71 ]
No need of BCLK state maintenance from driver side as
clock_enable and clk_disable API's maintaing state counter.
One of the major issue was spotted when Headset jack inserted
while playback continues, due to same PCM device node opens twice
for playaback/capture and closes once for capture and playback continues.
It can resolve the errors in such scenarios.
Fixes: b182496822 ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210127151824.8929-1-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fd8d2d275 ]
At the moment it is necessary to set up the DAPM routes between
front-end AIF<->DAI explicitly in the device tree, e.g. using
audio-routing =
"MM_DL1", "MultiMedia1 Playback",
"MM_DL3", "MultiMedia3 Playback",
"MM_DL4", "MultiMedia4 Playback",
"MultiMedia2 Capture", "MM_UL2";
This is prone to mistakes and (sadly) there is no clear error if one
of these routes is missing. :(
Actually, this should not be necessary because the ASoC core normally
automatically links AIF<->DAI within snd_soc_dapm_link_dai_widgets().
This is done using the "stname" parameter of SND_SOC_DAPM_AIF_IN/OUT.
For SND_SOC_DAPM_AIF_IN("MM_DL1", "MultiMedia1 Playback", 0, 0, 0, 0),
it should create the route from above: MM_DL1 <-> MultiMedia1 Playback.
This does not work at the moment because the AIF widget (MM_DL1)
and the DAI widget (MultiMedia1 Playback) belong to different
DAPM contexts (q6routing / q6asm-dai).
Fix this by declaring the AIF widgets in the same driver as the DAIs
(q6asm-dai). Now the routes above are created automatically
and no longer need to be specified in the device tree.
This is also more consistent with the back-end AIFs which are already
declared in q6afe-dais instead of q6routing. q6routing should only link
the components together using mixers.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20201211203255.148246-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd3484f7f1 ]
lpass hdmi support patch totally removed support for MI2S TERTIARY
and QUATERNARY.
One of the major issue was spotted with the design of having
separate SoC specific header files for the common lpass driver.
This design is prone to break as an when new SoC header is added
as the common DAI ids of other SoCs will be overwritten by the
new ones.
Having a common header qcom,lpass.h should fix the issue and any new
DAI ids should be added to the common header.
With this change lpass also needs a new of_xlate function to resolve
dai name.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Reported-by: Jun Nie <jun.nie@linaro.org>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210119171527.32145-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 315fbe4cef ]
MI2S and DMA control registers are not volatile, so remove these from volatile registers list.
Registers reset state check by reading non volatile registers makes no use,
so remove error check from cpu and platform trigger callbacks.
Initialized map variable two times in lpass platform trigger API,
so remove redundant initialization.
Fixes commit b182496822 ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1608192514-29695-2-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e59dd249c ]
There are two issues in this function.
1) We can't drop the refrences on "cpu", "codec" and "platform" before
we take the reference. This doesn't cause a problem on the first
iteration because those pointers start as NULL so the of_node_put()
is a no-op. But on the subsequent iterations, it will lead to a use
after free.
2) If the devm_kzalloc() allocation failed then the code returned
directly instead of cleaning up.
Fixes: c1e6414cdc ("ASoC: qcom: common: Fix refcount imbalance on error")
Fixes: 1e36ea360a ("ASoC: qcom: common: use modern dai_link style")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201105125154.GA176426@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix enabling BCLK and LRCLK only when LPAIF is invalid state and
bit clock in enable state.
In device suspend/resume scenario LPAIF is going to reset state.
which is causing LRCLK disable and BCLK enable.
Avoid such inconsitency by removing unnecessary cpu dai prepare API,
which is doing LRCLK enable, and by maintaining BLCK state information.
Fixes: 7e6799d8f8 ("ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1606148273-17325-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Disable MI2S bit clock from PAUSE/STOP/SUSPEND usecase instead of
shutdown time. Acheive this by invoking clk_disable API from
cpu daiops trigger instead of cpu daiops shutdown.
Change non-atomic API "clk_prepare_enable" to atomic API
"clk_enable" in trigger, as trigger is being called from atomic context.
Fixes: 7e6799d8f8 ("ASoC: qcom: lpass-cpu: Enable MI2S BCLK and LRCLK together")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1603098363-9251-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With the current state of code, we would endup with something like
below in /proc/asound/cards for 2 machines based on this driver.
Machine 1:
0 [DB845c ]: DB845c - DB845c
DB845c
Machine 2:
0 [LenovoYOGAC6301]: Lenovo-YOGA-C63 - Lenovo-YOGA-C630-13Q50
LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216
This is not very UCM friendly both w.r.t to common up configs and
card identification, and UCM2 became totally not usefull with just
one ucm sdm845.conf for two machines which have different setups
w.r.t HDMI and other dais.
Reasons for such thing is partly because Qualcomm machine drivers never
cared to set driver_name.
This patch sets up driver name for the this driver to sort out the
UCM integration issues!
after this patch contents of /proc/asound/cards:
Machine 1:
0 [DB845c ]: sdm845 - DB845c
DB845c
Machine 2:
0 [LenovoYOGAC6301]: sdm845 - Lenovo-YOGA-C630-13Q50
LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216
with this its possible to align with what UCM2 expects and we can have
sdm845/DB845.conf
sdm845/LENOVO-81JL-LenovoYOGAC630_13Q50-LNVNB161216.conf
... for board variants. This should scale much better!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201023095849.22894-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Here are fixes for two warnings types discovered while building qdsp6 drivers
without CONFIG_OF and with W=1
One of them was reported by Intel kernel test robot on q6afe-clocks patch, which
equally applies to rest of the qdsp6 drivers.
changes since v1:
- added ifdef CONFIG_OF instead of removing of_match_ptr
Srinivas Kandagatla (2):
ASoC: qdsp6: add ifdef CONFIG_OF around of_device_id
ASoC: q6asm: fix kernel doc warnings
sound/soc/qcom/qdsp6/q6adm.c | 2 ++
sound/soc/qcom/qdsp6/q6afe-clocks.c | 2 ++
sound/soc/qcom/qdsp6/q6afe-dai.c | 2 ++
sound/soc/qcom/qdsp6/q6afe.c | 2 ++
sound/soc/qcom/qdsp6/q6asm-dai.c | 2 ++
sound/soc/qcom/qdsp6/q6asm.c | 6 ++++++
sound/soc/qcom/qdsp6/q6core.c | 2 ++
sound/soc/qcom/qdsp6/q6routing.c | 2 ++
8 files changed, 20 insertions(+)
--
2.21.0
This patch fixes below kernel doc warnings on not describing all the parmeters
sound/soc/qcom/qdsp6/q6asm.c:927: warning: Function parameter or member
'stream_id' not described in 'q6asm_open_write'
sound/soc/qcom/qdsp6/q6asm.c:927: warning: Function parameter or member
'is_gapless' not described in 'q6asm_open_write'
sound/soc/qcom/qdsp6/q6asm.c:1053: warning: Function parameter or member
'stream_id' not described in 'q6asm_run'
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200925163552.20717-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
