Pull DRM fixes from Dave Airlie:
"This is just a set of nouveau and radeon fixes, the nouveau ones fix
some suspend/resume regressions since use of copy engines and some
fixes for Z compression on some newer chipsets."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/dce2: use 10khz units for audio dto calculation
drm/radeon: Fix VRAM size calculation for VRAM >= 4GB
drm/radeon: Remove superfluous variable
drm/nouveau: ensure channels are stopped before saving fences for suspend
drm/nv50/fifo: prevent races between clients updating playlists
drm/nvc0/fifo: prevent CHAN_TABLE_ERROR:CHANNEL_PENDING on fifo fini
drm/nvc0/fifo: prevent races between clients updating playlists
drm/nve0/fifo: prevent races between clients updating playlists
drm/nve0/ltcg: poke the partition count into yet another register
drm/nvc0/ltcg: fix handling of disabled partitions
drm/nvc0/ce: disable ce1 on a number of chipsets
drm/nouveau/bios: fix thinko in ZM_MASK_ADD opcode
drm/nouveau: fix build with nv50->nvc0
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 3.10.
Wierd bits:
- OMAP drm changes required OMAP dss changes, in drivers/video, so I
took them in here.
- one more fbcon fix for font handover
- VT switch avoidance in pm code
- scatterlist helpers for gpu drivers - have acks from akpm
Highlights:
- qxl kms driver - driver for the spice qxl virtual GPU
Nouveau:
- fermi/kepler VRAM compression
- GK110/nvf0 modesetting support.
Tegra:
- host1x core merged with 2D engine support
i915:
- vt switchless resume
- more valleyview support
- vblank fixes
- modesetting pipe config rework
radeon:
- UVD engine support
- SI chip tiling support
- GPU registers initialisation from golden values.
exynos:
- device tree changes
- fimc block support
Otherwise:
- bunches of fixes all over the place."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
qxl: update to new idr interfaces.
drm/nouveau: fix build with nv50->nvc0
drm/radeon: fix handling of v6 power tables
drm/radeon: clarify family checks in pm table parsing
drm/radeon: consolidate UVD clock programming
drm/radeon: fix UPLL_REF_DIV_MASK definition
radeon: add bo tracking debugfs
drm/radeon: add new richland pci ids
drm/radeon: add some new SI PCI ids
drm/radeon: fix scratch reg handling for UVD fence
drm/radeon: allocate SA bo in the requested domain
drm/radeon: fix possible segfault when parsing pm tables
drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
OMAPDSS: VENC: Add error handling for venc_probe_pdata
OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
OMAPDSS: DSI: Add error handling for dsi_probe_pdata
OMAPDSS: SDI: Add error handling for sdi_probe_pdata
OMAPDSS: DPI: Add error handling for dpi_probe_pdata
...
We need to be able to process interrupts before the DRM code is able to
actually enable them, set it up ourselves. Also, it's less convoluted
to *not* use the DRM wrappers it appears...
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Seen in the wild, don't have the hardware but this hacks things up to
treat it the same as GF119 for now.
Should be relatively safe, I'd be very surprised if anything major
changed outside of PGRAPH. PGRAPH (3D etc) is disabled by default
however until it's confirmed working.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is needed because temperature management on nv50 can be enabled and it
looks about the same as nv40.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Some platforms only provide their PCI ROM via a platform-specific interface.
Fall back to attempting that if all other sources fail.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The kernel message "[ PTHERM][0000:01:00.0] Thermal management: disabled"
is misleading as it actually means "fan management: disabled".
This patch fixes both the source and the message to improve readability.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In nouveau_therm_sensor_event, temperature is stored as an uint8_t
even though the original interface returns an int.
This change should make it more obvious when the sensor is either
very-ill-calibrated or when we selected the wrong sensor style
on the nv40 family.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Based on my experience, 10ms wasn't always enough. Let's bump that
to a little more.
If this turns out to be insufficient-enough again, then an approach
based on letting the sensor settle for several seconds before starting
polling on the temperature would be better suited. This way, boot time
wouldn't be impacted by those waits too much.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The condition to select between the old and new style was a thinko
as rnndb orders chipsets based on their release date (or general
chronologie hw-wise) and not based on their chipset number.
As the nv40 family is a mess when it comes to numbers, this patch
introduces a switch-based selection between the old and new style.
Signed-off-by: Martin Peres <martin.peres@labri.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes issue where i2c subdev never gets destroyed due to its subobjects
holding references. This will mean the i2c subdev refcount goes
negative during its destruction, but this isn't an issue in practice.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pull drm merge from Dave Airlie:
"Highlights:
- TI LCD controller KMS driver
- TI OMAP KMS driver merged from staging
- drop gma500 stub driver
- the fbcon locking fixes
- the vgacon dirty like zebra fix.
- open firmware videomode and hdmi common code helpers
- major locking rework for kms object handling - pageflip/cursor
won't block on polling anymore!
- fbcon helper and prime helper cleanups
- i915: all over the map, haswell power well enhancements, valleyview
macro horrors cleaned up, killing lots of legacy GTT code,
- radeon: CS ioctl unification, deprecated UMS support, gpu reset
rework, VM fixes
- nouveau: reworked thermal code, external dp/tmds encoder support
(anx9805), fences sleep instead of polling,
- exynos: all over the driver fixes."
Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d
("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd")
and the new changes that modified that evergreen_dma_cs_parse()
function.
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits)
drm/tilcdc: only build on arm
drm/i915: Revert hdmi HDP pin checks
drm/tegra: Add list of framebuffers to debugfs
drm/tegra: Fix color expansion
drm/tegra: Split DC_CMD_STATE_CONTROL register write
drm/tegra: Implement page-flipping support
drm/tegra: Implement VBLANK support
drm/tegra: Implement .mode_set_base()
drm/tegra: Add plane support
drm/tegra: Remove bogus tegra_framebuffer structure
drm: Add consistency check for page-flipping
drm/radeon: Use generic HDMI infoframe helpers
drm/tegra: Use generic HDMI infoframe helpers
drm: Add EDID helper documentation
drm: Add HDMI infoframe helpers
video: Add generic HDMI infoframe helpers
drm: Add some missing forward declarations
drm: Move mode tables to drm_edid.c
drm: Remove duplicate drm_mode_cea_vic()
gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
...
If I build nouveau on ia64, Kconfig warns:
warning: (DRM_NOUVEAU) selects ACPI_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI)
warning: (DRM_NOUVEAU) selects MXM_WMI which has unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && ACPI_WMI)
Make all the ACPI support depend on X86 and select
X86_PLATFORM_DEVICES.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A single U encoder table can match multiple DCB entries, whereas the
reverse is not true and can lead to us not matching a DCB entry at
all, and fail to initialise some encoders.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For off-chip transmitters we won't necessarily have an i2c table entry
to lookup, but we can do it instead by encoding the type to include
the extdev type and looking that up instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not quite how I want it yet, but, I'll fix that at some point. For
right now, it's needed because find() won't necessarily be used right
before a transaction anymore.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
