commit 3d07fa1dd1 upstream.
The pipe cpumask used to serialize opens between the main and percpu
trace pipes is not zeroed or initialized. This can result in
spurious -EBUSY returns if underlying memory is not fully zeroed.
This has been observed by immediate failure to read the main
trace_pipe file on an otherwise newly booted and idle system:
# cat /sys/kernel/debug/tracing/trace_pipe
cat: /sys/kernel/debug/tracing/trace_pipe: Device or resource busy
Zero the allocation of pipe_cpumask to avoid the problem.
Link: https://lore.kernel.org/linux-trace-kernel/20230831125500.986862-1-bfoster@redhat.com
Cc: stable@vger.kernel.org
Fixes: c2489bb7e6 ("tracing: Introduce pipe_cpumask to avoid race on trace_pipes")
Reviewed-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b8272ff4a upstream.
Xiongfeng reported and debugged a self deadlock of the task which initiates
and controls a CPU hot-unplug operation vs. the CFS bandwidth timer.
CPU1 CPU2
T1 sets cfs_quota
starts hrtimer cfs_bandwidth 'period_timer'
T1 is migrated to CPU2
T1 initiates offlining of CPU1
Hotplug operation starts
...
'period_timer' expires and is re-enqueued on CPU1
...
take_cpu_down()
CPU1 shuts down and does not handle timers
anymore. They have to be migrated in the
post dead hotplug steps by the control task.
T1 runs the post dead offline operation
T1 is scheduled out
T1 waits for 'period_timer' to expire
T1 waits there forever if it is scheduled out before it can execute the hrtimer
offline callback hrtimers_dead_cpu().
Cure this by delegating the hotplug control operation to a worker thread on
an online CPU. This takes the initiating user space task, which might be
affected by the bandwidth timer, completely out of the picture.
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Yu Liao <liaoyu15@huawei.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/8e785777-03aa-99e1-d20e-e956f5685be6@huawei.com
Link: https://lore.kernel.org/r/87h6oqdq0i.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3163f635b2 ]
Warning happened in rb_end_commit() at code:
if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)))
WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142
rb_commit+0x402/0x4a0
Call Trace:
ring_buffer_unlock_commit+0x42/0x250
trace_buffer_unlock_commit_regs+0x3b/0x250
trace_event_buffer_commit+0xe5/0x440
trace_event_buffer_reserve+0x11c/0x150
trace_event_raw_event_sched_switch+0x23c/0x2c0
__traceiter_sched_switch+0x59/0x80
__schedule+0x72b/0x1580
schedule+0x92/0x120
worker_thread+0xa0/0x6f0
It is because the race between writing event into cpu buffer and swapping
cpu buffer through file per_cpu/cpu0/snapshot:
Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1
-------- --------
tracing_snapshot_write()
[...]
ring_buffer_lock_reserve()
cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a';
[...]
rb_reserve_next_event()
[...]
ring_buffer_swap_cpu()
if (local_read(&cpu_buffer_a->committing))
goto out_dec;
if (local_read(&cpu_buffer_b->committing))
goto out_dec;
buffer_a->buffers[cpu] = cpu_buffer_b;
buffer_b->buffers[cpu] = cpu_buffer_a;
// 2. cpu_buffer has swapped here.
rb_start_commit(cpu_buffer);
if (unlikely(READ_ONCE(cpu_buffer->buffer)
!= buffer)) { // 3. This check passed due to 'cpu_buffer->buffer'
[...] // has not changed here.
return NULL;
}
cpu_buffer_b->buffer = buffer_a;
cpu_buffer_a->buffer = buffer_b;
[...]
// 4. Reserve event from 'cpu_buffer_a'.
ring_buffer_unlock_commit()
[...]
cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!!
rb_commit(cpu_buffer)
rb_end_commit() // 6. WARN for the wrong 'committing' state !!!
Based on above analysis, we can easily reproduce by following testcase:
``` bash
#!/bin/bash
dmesg -n 7
sysctl -w kernel.panic_on_warn=1
TR=/sys/kernel/tracing
echo 7 > ${TR}/buffer_size_kb
echo "sched:sched_switch" > ${TR}/set_event
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
while [ true ]; do
echo 1 > ${TR}/per_cpu/cpu0/snapshot
done &
```
To fix it, IIUC, we can use smp_call_function_single() to do the swap on
the target cpu where the buffer is located, so that above race would be
avoided.
Link: https://lore.kernel.org/linux-trace-kernel/20230831132739.4070878-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: f1affcaaa8 ("tracing: Add snapshot in the per_cpu trace directories")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96c1fa04f0 ]
In commit 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle") the
new function report_idle_softirq() was created by breaking code out of the
existing can_stop_idle_tick() for kernels v5.18 and newer.
In doing so, the code essentially went from a one conditional:
if (a && b && c)
warn();
to a three conditional:
if (!a)
return;
if (!b)
return;
if (!c)
return;
warn();
But that conversion got the condition for the RT specific
local_bh_blocked() wrong. The original condition was:
!local_bh_blocked()
but the conversion failed to negate it so it ended up as:
if (!local_bh_blocked())
return false;
This issue lay dormant until another fixup for the same commit was added
in commit a7e282c777 ("tick/rcu: Fix bogus ratelimit condition").
This commit realized the ratelimit was essentially set to zero instead
of ten, and hence *no* softirq pending messages would ever be issued.
Once this commit was backported via linux-stable, both the v6.1 and v6.4
preempt-rt kernels started printing out 10 instances of this at boot:
NOHZ tick-stop error: local softirq work is pending, handler #80!!!
Remove the negation and return when local_bh_blocked() evaluates to true to
bring the correct behaviour back.
Fixes: 0345691b24 ("tick/rcu: Stop allowing RCU_SOFTIRQ in idle")
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Wen Yang <wenyang.linux@foxmail.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20230818200757.1808398-1-paul.gortmaker@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8c926200c ]
Since commit f28e22441f ("cgroup/cpuset: Add a new isolated
cpus.partition type"), the CS_SCHED_LOAD_BALANCE bit of a v2 cpuset
can be on or off. The child cpusets of a partition root must have the
same setting as its parent or it may screw up the rebuilding of sched
domains. Fix this problem by making sure the a child v2 cpuset will
follows its parent cpuset load balance state unless the child cpuset
is a new partition root itself.
Fixes: f28e22441f ("cgroup/cpuset: Add a new isolated cpus.partition type")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b59bc6e372 ]
Tracefs or debugfs maybe cause hundreds to thousands of PATH records,
too many PATH records maybe cause soft lockup.
For example:
1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n
2. auditctl -a exit,always -S open -k key
3. sysctl -w kernel.watchdog_thresh=5
4. mkdir /sys/kernel/debug/tracing/instances/test
There may be a soft lockup as follows:
watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498]
Kernel panic - not syncing: softlockup: hung tasks
Call trace:
dump_backtrace+0x0/0x30c
show_stack+0x20/0x30
dump_stack+0x11c/0x174
panic+0x27c/0x494
watchdog_timer_fn+0x2bc/0x390
__run_hrtimer+0x148/0x4fc
__hrtimer_run_queues+0x154/0x210
hrtimer_interrupt+0x2c4/0x760
arch_timer_handler_phys+0x48/0x60
handle_percpu_devid_irq+0xe0/0x340
__handle_domain_irq+0xbc/0x130
gic_handle_irq+0x78/0x460
el1_irq+0xb8/0x140
__audit_inode_child+0x240/0x7bc
tracefs_create_file+0x1b8/0x2a0
trace_create_file+0x18/0x50
event_create_dir+0x204/0x30c
__trace_add_new_event+0xac/0x100
event_trace_add_tracer+0xa0/0x130
trace_array_create_dir+0x60/0x140
trace_array_create+0x1e0/0x370
instance_mkdir+0x90/0xd0
tracefs_syscall_mkdir+0x68/0xa0
vfs_mkdir+0x21c/0x34c
do_mkdirat+0x1b4/0x1d4
__arm64_sys_mkdirat+0x4c/0x60
el0_svc_common.constprop.0+0xa8/0x240
do_el0_svc+0x8c/0xc0
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Therefore, we add cond_resched() to __audit_inode_child() to fix it.
Fixes: 5195d8e217 ("audit: dynamically allocate audit_names when not enough space is in the names array")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6785b2edf4 ]
The commit being fixed introduced a hunk into check_func_arg_reg_off
that bypasses reg->off == 0 enforcement when offset points to a graph
node or root. This might possibly be done for treating bpf_rbtree_remove
and others as KF_RELEASE and then later check correct reg->off in helper
argument checks.
But this is not the case, those helpers are already not KF_RELEASE and
permit non-zero reg->off and verify it later to match the subobject in
BTF type.
However, this logic leads to bpf_obj_drop permitting free of register
arguments with non-zero offset when they point to a graph root or node
within them, which is not ok.
For instance:
struct foo {
int i;
int j;
struct bpf_rb_node node;
};
struct foo *f = bpf_obj_new(typeof(*f));
if (!f) ...
bpf_obj_drop(f); // OK
bpf_obj_drop(&f->i); // still ok from verifier PoV
bpf_obj_drop(&f->node); // Not OK, but permitted right now
Fix this by dropping the whole part of code altogether.
Fixes: 6a3cd3318f ("bpf: Migrate release_on_unlock logic to non-owning ref semantics")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33937607ef ]
We are utilizing BPF LSM to monitor BPF operations within our container
environment. When we add support for raw_tracepoint, it hits below
error.
; (const void *)attr->raw_tracepoint.name);
27: (79) r3 = *(u64 *)(r2 +0)
access beyond the end of member map_type (mend:4) in struct (anon) with off 0 size 8
It can be reproduced with below BPF prog.
SEC("lsm/bpf")
int BPF_PROG(bpf_audit, int cmd, union bpf_attr *attr, unsigned int size)
{
switch (cmd) {
case BPF_RAW_TRACEPOINT_OPEN:
bpf_printk("raw_tracepoint is %s", attr->raw_tracepoint.name);
break;
default:
break;
}
return 0;
}
The reason is that when accessing a field in a union, such as bpf_attr,
if the field is located within a nested struct that is not the first
member of the union, it can result in incorrect field verification.
union bpf_attr {
struct {
__u32 map_type; <<<< Actually it will find that field.
__u32 key_size;
__u32 value_size;
...
};
...
struct {
__u64 name; <<<< We want to verify this field.
__u32 prog_fd;
} raw_tracepoint;
};
Considering the potential deep nesting levels, finding a perfect
solution to address this issue has proven challenging. Therefore, I
propose a solution where we simply skip the verification process if the
field in question is located within a union.
Fixes: 7e3617a72d ("bpf: Add array support to btf_struct_access")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230713025642.27477-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce4dc3e4a ]
Per discussion with Alexei, the PTR_UNTRUSTED flag should not been
cleared when we start to walk a new struct, because the struct in
question may be a struct nested in a union. We should also check and set
this flag before we walk its each member, in case itself is a union.
We will clear this flag if the field is BTF_TYPE_SAFE_RCU_OR_NULL.
Fixes: 6fcd486b3a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230713025642.27477-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7fcb99877 ]
There is a 10% rounding error in the intial value of the
sysctl_sched_rr_timeslice with CONFIG_HZ_300=y.
This was found with LTP test sched_rr_get_interval01:
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
What this test does is to compare the return value from the
sched_rr_get_interval() and the sched_rr_timeslice_ms sysctl file and
fails if they do not match.
The problem it found is the intial sysctl file value which was computed as:
static int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;
which works fine as long as MSEC_PER_SEC is multiple of HZ, however it
introduces 10% rounding error for CONFIG_HZ_300:
(MSEC_PER_SEC / HZ) * (100 * HZ / 1000)
(1000 / 300) * (100 * 300 / 1000)
3 * 30 = 90
This can be easily fixed by reversing the order of the multiplication
and division. After this fix we get:
(MSEC_PER_SEC * (100 * HZ / 1000)) / HZ
(1000 * (100 * 300 / 1000)) / 300
(1000 * 30) / 300 = 100
Fixes: 975e155ed8 ("sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds")
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/r/20230802151906.25258-2-chrubis@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40806e9bc ]
The nanosecond-to-millisecond skew computation uses unsigned arithmetic,
which produces user-unfriendly large positive numbers for negative skews.
Therefore, use signed arithmetic for this computation in order to preserve
the negativity.
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Reported-by: Feng Tang <feng.tang@intel.com>
Fixes: dd02926994 ("clocksource: Improve "skew is too large" messages")
Reviewed-by: Feng Tang <feng.tang@intel.com>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5063e8948 ]
Running the refscale test occasionally crashes the kernel with the
following error:
[ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8
[ 8569.952900] #PF: supervisor read access in kernel mode
[ 8569.952902] #PF: error_code(0x0000) - not-present page
[ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0
[ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI
[ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021
[ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190
:
[ 8569.952940] Call Trace:
[ 8569.952941] <TASK>
[ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale]
[ 8569.952959] kthread+0x10e/0x130
[ 8569.952966] ret_from_fork+0x1f/0x30
[ 8569.952973] </TASK>
The likely cause is that init_waitqueue_head() is called after the call to
the torture_create_kthread() function that creates the ref_scale_reader
kthread. Although this init_waitqueue_head() call will very likely
complete before this kthread is created and starts running, it is
possible that the calling kthread will be delayed between the calls to
torture_create_kthread() and init_waitqueue_head(). In this case, the
new kthread will use the waitqueue head before it is properly initialized,
which is not good for the kernel's health and well-being.
The above crash happened here:
static inline void __add_wait_queue(...)
{
:
if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here
The offset of flags from list_head entry in wait_queue_entry is
-0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task
structure is zero initialized, the instruction will try to access address
0xffffffffffffffe8, which is exactly the fault address listed above.
This commit therefore invokes init_waitqueue_head() before creating
the kthread.
Fixes: 653ed64b01 ("refperf: Add a test to measure performance of read-side synchronization")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2489bb7e6 ]
There is race issue when concurrently splice_read main trace_pipe and
per_cpu trace_pipes which will result in data read out being different
from what actually writen.
As suggested by Steven:
> I believe we should add a ref count to trace_pipe and the per_cpu
> trace_pipes, where if they are opened, nothing else can read it.
>
> Opening trace_pipe locks all per_cpu ref counts, if any of them are
> open, then the trace_pipe open will fail (and releases any ref counts
> it had taken).
>
> Opening a per_cpu trace_pipe will up the ref count for just that
> CPU buffer. This will allow multiple tasks to read different per_cpu
> trace_pipe files, but will prevent the main trace_pipe file from
> being opened.
But because we only need to know whether per_cpu trace_pipe is open or
not, using a cpumask instead of using ref count may be easier.
After this patch, users will find that:
- Main trace_pipe can be opened by only one user, and if it is
opened, all per_cpu trace_pipes cannot be opened;
- Per_cpu trace_pipes can be opened by multiple users, but each per_cpu
trace_pipe can only be opened by one user. And if one of them is
opened, main trace_pipe cannot be opened.
Link: https://lore.kernel.org/linux-trace-kernel/20230818022645.1948314-1-zhengyejian1@huawei.com
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9011e49d54 upstream.
It has recently come to my attention that nvidia is circumventing the
protection added in 262e6ae708 ("modules: inherit
TAINT_PROPRIETARY_MODULE") by importing exports from their proprietary
modules into an allegedly GPL licensed module and then rexporting them.
Given that symbol_get was only ever intended for tightly cooperating
modules using very internal symbols it is logical to restrict it to
being used on EXPORT_SYMBOL_GPL and prevent nvidia from costly DMCA
Circumvention of Access Controls law suites.
All symbols except for four used through symbol_get were already exported
as EXPORT_SYMBOL_GPL, and the remaining four ones were switched over in
the preparation patches.
Fixes: 262e6ae708 ("modules: inherit TAINT_PROPRIETARY_MODULE")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f0467fe0 upstream.
Kernel test robot reported a kallsyms_test failure when clang lto is
enabled (thin or full) and CONFIG_KALLSYMS_SELFTEST is also enabled.
I can reproduce in my local environment with the following error message
with thin lto:
[ 1.877897] kallsyms_selftest: Test for 1750th symbol failed: (tsc_cs_mark_unstable) addr=ffffffff81038090
[ 1.877901] kallsyms_selftest: abort
It appears that commit 8cc32a9bbf ("kallsyms: strip LTO-only suffixes
from promoted global functions") caused the failure. Commit 8cc32a9bbf
changed cleanup_symbol_name() based on ".llvm." instead of '.' where
".llvm." is appended to a before-lto-optimization local symbol name.
We need to propagate such knowledge in kallsyms_selftest.c as well.
Further more, compare_symbol_name() in kallsyms.c needs change as well.
In scripts/kallsyms.c, kallsyms_names and kallsyms_seqs_of_names are used
to record symbol names themselves and index to symbol names respectively.
For example:
kallsyms_names:
...
__amd_smn_rw._entry <== seq 1000
__amd_smn_rw._entry.5 <== seq 1001
__amd_smn_rw.llvm.<hash> <== seq 1002
...
kallsyms_seqs_of_names are sorted based on cleanup_symbol_name() through, so
the order in kallsyms_seqs_of_names actually has
index 1000: seq 1002 <== __amd_smn_rw.llvm.<hash> (actual symbol comparison using '__amd_smn_rw')
index 1001: seq 1000 <== __amd_smn_rw._entry
index 1002: seq 1001 <== __amd_smn_rw._entry.5
Let us say at a particular point, at index 1000, symbol '__amd_smn_rw.llvm.<hash>'
is comparing to '__amd_smn_rw._entry' where '__amd_smn_rw._entry' is the one to
search e.g., with function kallsyms_on_each_match_symbol(). The current implementation
will find out '__amd_smn_rw._entry' is less than '__amd_smn_rw.llvm.<hash>' and
then continue to search e.g., index 999 and never found a match although the actual
index 1001 is a match.
To fix this issue, let us do cleanup_symbol_name() first and then do comparison.
In the above case, comparing '__amd_smn_rw' vs '__amd_smn_rw._entry' and
'__amd_smn_rw._entry' being greater than '__amd_smn_rw', the next comparison will
be > index 1000 and eventually index 1001 will be hit an a match is found.
For any symbols not having '.llvm.' substr, there is no functionality change
for compare_symbol_name().
Fixes: 8cc32a9bbf ("kallsyms: strip LTO-only suffixes from promoted global functions")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308232200.1c932a90-oliver.sang@intel.com
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Song Liu <song@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230825034659.1037627-1-yonghong.song@linux.dev
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a6b58c5cd upstream.
On the parisc architecture, lockdep reports for all static objects which
are in the __initdata section (e.g. "setup_done" in devtmpfs,
"kthreadd_done" in init/main.c) this warning:
INFO: trying to register non-static key.
The warning itself is wrong, because those objects are in the __initdata
section, but the section itself is on parisc outside of range from
_stext to _end, which is why the static_obj() functions returns a wrong
answer.
While fixing this issue, I noticed that the whole existing check can
be simplified a lot.
Instead of checking against the _stext and _end symbols (which include
code areas too) just check for the .data and .bss segments (since we check a
data object). This can be done with the existing is_kernel_core_data()
macro.
In addition objects in the __initdata section can be checked with
init_section_contains(), and is_kernel_rodata() allows keys to be in the
_ro_after_init section.
This partly reverts and simplifies commit bac59d18c7 ("x86/setup: Fix static
memory detection").
Link: https://lkml.kernel.org/r/ZNqrLRaOi/3wPAdp@p100
Fixes: bac59d18c7 ("x86/setup: Fix static memory detection")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2abcc4b5a6 upstream.
module_init_layout_section() choses whether the core module loader
considers a section as init or not. This affects the placement of the
exit section when module unloading is disabled. This code will never run,
so it can be free()d once the module has been initialised.
arm and arm64 need to count the number of PLTs they need before applying
relocations based on the section name. The init PLTs are stored separately
so they can be free()d. arm and arm64 both use within_module_init() to
decide which list of PLTs to use when applying the relocation.
Because within_module_init()'s behaviour changes when module unloading
is disabled, both architecture would need to take this into account when
counting the PLTs.
Today neither architecture does this, meaning when module unloading is
disabled there are insufficient PLTs in the init section to load some
modules, resulting in warnings:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
Instead of duplicating module_init_layout_section()s logic, expose it.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Fixes: 055f23b74b ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef269ef1a upstream.
cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks
have been checked. DL BW is not allocated per-task but as a sum over
all DL tasks migrating.
If multiple controllers are attached to the cgroup next to the cpuset
controller a non-cpuset can_attach() can fail. In this case free DL BW
in cpuset_cancel_attach().
Finally, update cpuset DL task count (nr_deadline_tasks) only in
cpuset_attach().
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85989106fe upstream.
While moving a set of tasks between exclusive cpusets,
cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for
DL BW overflow checking and per-task DL BW allocation on the destination
root_domain for the DL tasks in this set.
This approach has the issue of not freeing already allocated DL BW in
the following error cases:
(1) The set of tasks includes multiple DL tasks and DL BW overflow
checking fails for one of the subsequent DL tasks.
(2) Another controller next to the cpuset controller which is attached
to the same cgroup fails in its can_attach().
To address this problem rework dl_cpu_busy():
(1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a
dedicated dl_bw_free().
(2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of
a `struct task_struct *p` used in dl_cpu_busy(). This allows to
allocate DL BW for a set of tasks too rather than only for a single
task.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c24849f55 upstream.
Qais reported that iterating over all tasks when rebuilding root domains
for finding out which ones are DEADLINE and need their bandwidth
correctly restored on such root domains can be a costly operation (10+
ms delays on suspend-resume).
To fix the problem keep track of the number of DEADLINE tasks belonging
to each cpuset and then use this information (followup patch) to only
perform the above iteration if DEADLINE tasks are actually present in
the cpuset for which a corresponding root domain is being rebuilt.
Reported-by: Qais Yousef (Google) <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 111cd11bbc upstream.
Turns out percpu_cpuset_rwsem - commit 1243dc518c ("cgroup/cpuset:
Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea,
as it has been reported to cause slowdowns in workloads that need to
change cpuset configuration frequently and it is also not implementing
priority inheritance (which causes troubles with realtime workloads).
Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it
only for SCHED_DEADLINE tasks (other policies don't care about stable
cpusets anyway).
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad3a557daf upstream.
rebuild_root_domains() and update_tasks_root_domain() have neutral
names, but actually deal with DEADLINE bandwidth accounting.
Rename them to use 'dl_' prefix so that intent is more clear.
No functional change.
Suggested-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eecb91b9f9 ]
Kmemleak report a leak in graph_trace_open():
unreferenced object 0xffff0040b95f4a00 (size 128):
comm "cat", pid 204981, jiffies 4301155872 (age 99771.964s)
hex dump (first 32 bytes):
e0 05 e7 b4 ab 7d 00 00 0b 00 01 00 00 00 00 00 .....}..........
f4 00 01 10 00 a0 ff ff 00 00 00 00 65 00 10 00 ............e...
backtrace:
[<000000005db27c8b>] kmem_cache_alloc_trace+0x348/0x5f0
[<000000007df90faa>] graph_trace_open+0xb0/0x344
[<00000000737524cd>] __tracing_open+0x450/0xb10
[<0000000098043327>] tracing_open+0x1a0/0x2a0
[<00000000291c3876>] do_dentry_open+0x3c0/0xdc0
[<000000004015bcd6>] vfs_open+0x98/0xd0
[<000000002b5f60c9>] do_open+0x520/0x8d0
[<00000000376c7820>] path_openat+0x1c0/0x3e0
[<00000000336a54b5>] do_filp_open+0x14c/0x324
[<000000002802df13>] do_sys_openat2+0x2c4/0x530
[<0000000094eea458>] __arm64_sys_openat+0x130/0x1c4
[<00000000a71d7881>] el0_svc_common.constprop.0+0xfc/0x394
[<00000000313647bf>] do_el0_svc+0xac/0xec
[<000000002ef1c651>] el0_svc+0x20/0x30
[<000000002fd4692a>] el0_sync_handler+0xb0/0xb4
[<000000000c309c35>] el0_sync+0x160/0x180
The root cause is descripted as follows:
__tracing_open() { // 1. File 'trace' is being opened;
...
*iter->trace = *tr->current_trace; // 2. Tracer 'function_graph' is
// currently set;
...
iter->trace->open(iter); // 3. Call graph_trace_open() here,
// and memory are allocated in it;
...
}
s_start() { // 4. The opened file is being read;
...
*iter->trace = *tr->current_trace; // 5. If tracer is switched to
// 'nop' or others, then memory
// in step 3 are leaked!!!
...
}
To fix it, in s_start(), close tracer before switching then reopen the
new tracer after switching. And some tracers like 'wakeup' may not update
'iter->private' in some cases when reopen, then it should be cleared
to avoid being mistakenly closed again.
Link: https://lore.kernel.org/linux-trace-kernel/20230817125539.1646321-1-zhengyejian1@huawei.com
Fixes: d7350c3f45 ("tracing/core: make the read callbacks reentrants")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4d6b54381 ]
While debugging another issue I noticed that the stack trace contains one
invalid entry at the end:
<idle>-0 [008] d..4. 26.484201: wake_lat: pid=0 delta=2629976084 000000009cc24024 stack=STACK:
=> __schedule+0xac6/0x1a98
=> schedule+0x126/0x2c0
=> schedule_timeout+0x150/0x2c0
=> kcompactd+0x9ca/0xc20
=> kthread+0x2f6/0x3d8
=> __ret_from_fork+0x8a/0xe8
=> 0x6b6b6b6b6b6b6b6b
This is because the code failed to add the one element containing the
number of entries to field_size.
Link: https://lkml.kernel.org/r/20230816154928.4171614-4-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 887f92e09e ]
While debugging another issue I noticed that the stack trace output
contains the number of entries on top:
<idle>-0 [000] d..4. 203.322502: wake_lat: pid=0 delta=2268270616 stack=STACK:
=> 0x10
=> __schedule+0xac6/0x1a98
=> schedule+0x126/0x2c0
=> schedule_timeout+0x242/0x2c0
=> __wait_for_common+0x434/0x680
=> __wait_rcu_gp+0x198/0x3e0
=> synchronize_rcu+0x112/0x138
=> ring_buffer_reset_online_cpus+0x140/0x2e0
=> tracing_reset_online_cpus+0x15c/0x1d0
=> tracing_set_clock+0x180/0x1d8
=> hist_register_trigger+0x486/0x670
=> event_hist_trigger_parse+0x494/0x1318
=> trigger_process_regex+0x1d4/0x258
=> event_trigger_write+0xb4/0x170
=> vfs_write+0x210/0xad0
=> ksys_write+0x122/0x208
Fix this by skipping the first element. Also replace the pointer
logic with an index variable which is easier to read.
Link: https://lkml.kernel.org/r/20230816154928.4171614-3-svens@linux.ibm.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 00cf3d672a ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b71645d6af ]
Trace ring buffer can no longer record anything after executing
following commands at the shell prompt:
# cd /sys/kernel/tracing
# cat tracing_cpumask
fff
# echo 0 > tracing_cpumask
# echo 1 > snapshot
# echo fff > tracing_cpumask
# echo 1 > tracing_on
# echo "hello world" > trace_marker
-bash: echo: write error: Bad file descriptor
The root cause is that:
1. After `echo 0 > tracing_cpumask`, 'record_disabled' of cpu buffers
in 'tr->array_buffer.buffer' became 1 (see tracing_set_cpumask());
2. After `echo 1 > snapshot`, 'tr->array_buffer.buffer' is swapped
with 'tr->max_buffer.buffer', then the 'record_disabled' became 0
(see update_max_tr());
3. After `echo fff > tracing_cpumask`, the 'record_disabled' become -1;
Then array_buffer and max_buffer are both unavailable due to value of
'record_disabled' is not 0.
To fix it, enable or disable both array_buffer and max_buffer at the same
time in tracing_set_cpumask().
Link: https://lkml.kernel.org/r/20230805033816.3284594-2-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Fixes: 71babb2705 ("tracing: change CPU ring buffer state from tracing_cpumask")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d62cc390c2 upstream.
We received report [1] of kernel crash, which is caused by
using nesting protection without disabled preemption.
The bpf_event_output can be called by programs executed by
bpf_prog_run_array_cg function that disabled migration but
keeps preemption enabled.
This can cause task to be preempted by another one inside the
nesting protection and lead eventually to two tasks using same
perf_sample_data buffer and cause crashes like:
BUG: kernel NULL pointer dereference, address: 0000000000000001
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0010) - not-present page
...
? perf_output_sample+0x12a/0x9a0
? finish_task_switch.isra.0+0x81/0x280
? perf_event_output+0x66/0xa0
? bpf_event_output+0x13a/0x190
? bpf_event_output_data+0x22/0x40
? bpf_prog_dfc84bbde731b257_cil_sock4_connect+0x40a/0xacb
? xa_load+0x87/0xe0
? __cgroup_bpf_run_filter_sock_addr+0xc1/0x1a0
? release_sock+0x3e/0x90
? sk_setsockopt+0x1a1/0x12f0
? udp_pre_connect+0x36/0x50
? inet_dgram_connect+0x93/0xa0
? __sys_connect+0xb4/0xe0
? udp_setsockopt+0x27/0x40
? __pfx_udp_push_pending_frames+0x10/0x10
? __sys_setsockopt+0xdf/0x1a0
? __x64_sys_connect+0xf/0x20
? do_syscall_64+0x3a/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixing this by disabling preemption in bpf_event_output.
[1] https://github.com/cilium/cilium/issues/26756
Cc: stable@vger.kernel.org
Reported-by: Oleg "livelace" Popov <o.popov@livelace.ru>
Closes: https://github.com/cilium/cilium/issues/26756
Fixes: 2a916f2f54 ("bpf: Use migrate_disable/enable in array macros and cgroup/lirc code.")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2c67a3e60 upstream.
The nesting protection in bpf_perf_event_output relies on disabled
preemption, which is guaranteed for kprobes and tracepoints.
However bpf_perf_event_output can be also called from uprobes context
through bpf_prog_run_array_sleepable function which disables migration,
but keeps preemption enabled.
This can cause task to be preempted by another one inside the nesting
protection and lead eventually to two tasks using same perf_sample_data
buffer and cause crashes like:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffffff82be3eea
...
Call Trace:
? __die+0x1f/0x70
? page_fault_oops+0x176/0x4d0
? exc_page_fault+0x132/0x230
? asm_exc_page_fault+0x22/0x30
? perf_output_sample+0x12b/0x910
? perf_event_output+0xd0/0x1d0
? bpf_perf_event_output+0x162/0x1d0
? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87
? __uprobe_perf_func+0x12b/0x540
? uprobe_dispatcher+0x2c4/0x430
? uprobe_notify_resume+0x2da/0xce0
? atomic_notifier_call_chain+0x7b/0x110
? exit_to_user_mode_prepare+0x13e/0x290
? irqentry_exit_to_user_mode+0x5/0x30
? asm_exc_int3+0x35/0x40
Fixing this by disabling preemption in bpf_perf_event_output.
Cc: stable@vger.kernel.org
Fixes: 8c7dcb84e3 ("bpf: implement sleepable uprobes by chaining gps")
Acked-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230725084206.580930-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7c62b75cd1 ]
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".
Fixes: 11941f8a85 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 640a604585 ]
The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:
------------[ cut here ]------------
WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events cpu_map_kthread_stop
RIP: 0010:put_cpu_map_entry+0xda/0x220
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
......
? put_cpu_map_entry+0xda/0x220
cpu_map_kthread_stop+0x41/0x60
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The root cause is the same as commit 4369016497 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.
Fixes: 6710e11269 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c3eba1c5e ]
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
Stable-dep-of: 640a604585 ("bpf, cpumap: Make sure kthread is running before map update returns")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22db41226b ]
Currently find_and_alloc_map() performs two separate functions: some
argument sanity checking and partial map creation workflow hanling.
Neither of those functions are self-sufficient and are augmented by
further checks and initialization logic in the caller (map_create()
function). So unify all the sanity checks, permission checks, and
creation and initialization logic in one linear piece of code in
map_create() instead. This also make it easier to further enhance
permission checks and keep them located in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-3-andrii@kernel.org
Stable-dep-of: 640a604585 ("bpf, cpumap: Make sure kthread is running before map update returns")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d28635abc ]
Make each bpf() syscall command a bit more self-contained, making it
easier to further enhance it. We move sysctl_unprivileged_bpf_disabled
handling down to map_create() and bpf_prog_load(), two special commands
in this regard.
Also swap the order of checks, calling bpf_capable() only if
sysctl_unprivileged_bpf_disabled is true, avoiding unnecessary audit
messages.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-2-andrii@kernel.org
Stable-dep-of: 640a604585 ("bpf, cpumap: Make sure kthread is running before map update returns")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7853c3424 ]
Henry reported that rt_mutex_adjust_prio_check() has an ordering
problem and puts the lie to the comment in [7]. Sharing the sort key
between lock->waiters and owner->pi_waiters *does* create problems,
since unlike what the comment claims, holding [L] is insufficient.
Notably, consider:
A
/ \
M1 M2
| |
B C
That is, task A owns both M1 and M2, B and C block on them. In this
case a concurrent chain walk (B & C) will modify their resp. sort keys
in [7] while holding M1->wait_lock and M2->wait_lock. So holding [L]
is meaningless, they're different Ls.
This then gives rise to a race condition between [7] and [11], where
the requeue of pi_waiters will observe an inconsistent tree order.
B C
(holds M1->wait_lock, (holds M2->wait_lock,
holds B->pi_lock) holds A->pi_lock)
[7]
waiter_update_prio();
...
[8]
raw_spin_unlock(B->pi_lock);
...
[10]
raw_spin_lock(A->pi_lock);
[11]
rt_mutex_enqueue_pi();
// observes inconsistent A->pi_waiters
// tree order
Fixing this means either extending the range of the owner lock from
[10-13] to [6-13], with the immediate problem that this means [6-8]
hold both blocked and owner locks, or duplicating the sort key.
Since the locking in chain walk is horrible enough without having to
consider pi_lock nesting rules, duplicate the sort key instead.
By giving each tree their own sort key, the above race becomes
harmless, if C sees B at the old location, then B will correct things
(if they need correcting) when it walks up the chain and reaches A.
Fixes: fb00aca474 ("rtmutex: Turn the plist into an rb-tree")
Reported-by: Henry Wu <triangletrap12@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Henry Wu <triangletrap12@gmail.com>
Link: https://lkml.kernel.org/r/20230707161052.GF2883469%40hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dea499781a ]
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.
Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d093282b0 ]
When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set
to 0 in order to make sure any read iterators reset themselves. However,
this will mess 'entries' stating, see following steps:
# cd /sys/kernel/tracing/
# 1. Enlarge ring buffer prepare for later reducing:
# echo 20 > per_cpu/cpu0/buffer_size_kb
# 2. Write a log into ring buffer of cpu0:
# taskset -c 0 echo "hello1" > trace_marker
# 3. Read the log:
# cat per_cpu/cpu0/trace_pipe
<...>-332 [000] ..... 62.406844: tracing_mark_write: hello1
# 4. Stop reading and see the stats, now 0 entries, and 1 event readed:
# cat per_cpu/cpu0/stats
entries: 0
[...]
read events: 1
# 5. Reduce the ring buffer
# echo 7 > per_cpu/cpu0/buffer_size_kb
# 6. Now entries became unexpected 1 because actually no entries!!!
# cat per_cpu/cpu0/stats
entries: 1
[...]
read events: 0
To fix it, introduce 'page_removed' field to count total removed pages
since last reset, then use it to let read iterators reset themselves
instead of changing the 'read' pointer.
Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Fixes: 83f40318da ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
