commit 291d044fd5 upstream.
BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.
backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.
While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).
Fixes: b5dc0163d8 ("bpf: precise scalar_value tracking")
Cc: stable@vger.kernel.org
Reported-by: Mohamed Mahmoud <mmahmoud@redhat.com>
Closes: https://lore.kernel.org/r/87jzrrwptf.fsf@toke.dk
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Tao Lyu <tao.lyu@epfl.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231102053913.12004-2-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bb7ea946a ]
Fix an edge case in __mark_chain_precision() which prematurely stops
backtracking instructions in a state if it happens that state's first
and last instruction indexes are the same. This situations doesn't
necessarily mean that there were no instructions simulated in a state,
but rather that we starting from the instruction, jumped around a bit,
and then ended up at the same instruction before checkpointing or
marking precision.
To distinguish between these two possible situations, we need to consult
jump history. If it's empty or contain a single record "bridging" parent
state and first instruction of processed state, then we indeed
backtracked all instructions in this state. But if history is not empty,
we are definitely not done yet.
Move this logic inside get_prev_insn_idx() to contain it more nicely.
Use -ENOENT return code to denote "we are out of instructions"
situation.
This bug was exposed by verifier_loop1.c's bounded_recursion subtest, once
the next fix in this patch set is applied.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: b5dc0163d8 ("bpf: precise scalar_value tracking")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110002638.4168352-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3feb263bb5 ]
ldimm64 instructions are 16-byte long, and so have to be handled
appropriately in check_cfg(), just like the rest of BPF verifier does.
This has implications in three places:
- when determining next instruction for non-jump instructions;
- when determining next instruction for callback address ldimm64
instructions (in visit_func_call_insn());
- when checking for unreachable instructions, where second half of
ldimm64 is expected to be unreachable;
We take this also as an opportunity to report jump into the middle of
ldimm64. And adjust few test_verifier tests accordingly.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Fixes: 475fb78fbf ("bpf: verifier (add branch/goto checks)")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a8a315f00 ]
Verifier emits relevant register state involved in any given instruction
next to it after `;` to the right, if possible. Or, worst case, on the
separate line repeating instruction index.
E.g., a nice and simple case would be:
2: (d5) if r0 s<= 0x0 goto pc+1 ; R0_w=0
But if there is some intervening extra output (e.g., precision
backtracking log) involved, we are supposed to see the state after the
precision backtrack log:
4: (75) if r0 s>= 0x0 goto pc+1
mark_precise: frame0: last_idx 4 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (d5) if r0 s<= 0x0 goto pc+1
mark_precise: frame0: regs=r0 stack= before 1: (b7) r0 = 0
6: R0_w=0
First off, note that in `6: R0_w=0` instruction index corresponds to the
next instruction, not to the conditional jump instruction itself, which
is wrong and we'll get to that.
But besides that, the above is a happy case that does work today. Yet,
if it so happens that precision backtracking had to traverse some of the
parent states, this `6: R0_w=0` state output would be missing.
This is due to a quirk of print_verifier_state() routine, which performs
mark_verifier_state_clean(env) at the end. This marks all registers as
"non-scratched", which means that subsequent logic to print *relevant*
registers (that is, "scratched ones") fails and doesn't see anything
relevant to print and skips the output altogether.
print_verifier_state() is used both to print instruction context, but
also to print an **entire** verifier state indiscriminately, e.g.,
during precision backtracking (and in a few other situations, like
during entering or exiting subprogram). Which means if we have to print
entire parent state before getting to printing instruction context
state, instruction context is marked as clean and is omitted.
Long story short, this is definitely not intentional. So we fix this
behavior in this patch by teaching print_verifier_state() to clear
scratch state only if it was used to print instruction state, not the
parent/callback state. This is determined by print_all option, so if
it's not set, we don't clear scratch state. This fixes missing
instruction state for these cases.
As for the mismatched instruction index, we fix that by making sure we
call print_insn_state() early inside check_cond_jmp_op() before we
adjusted insn_idx based on jump branch taken logic. And with that we get
desired correct information:
9: (16) if w4 == 0x1 goto pc+9
mark_precise: frame0: last_idx 9 first_idx 9 subseq_idx -1
mark_precise: frame0: parent state regs=r4 stack=: R2_w=1944 R4_rw=P1 R10=fp0
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx 9
mark_precise: frame0: regs=r4 stack= before 8: (66) if w4 s> 0x3 goto pc+5
mark_precise: frame0: regs=r4 stack= before 7: (b7) r4 = 1
9: R4=1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-6-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d9111f35 ]
Now that bpf_throw kfunc is the first such call instruction that has
noreturn semantics within the verifier, this also kicks in dead code
elimination in unprecedented ways. For one, any instruction following
a bpf_throw call will never be marked as seen. Moreover, if a callchain
ends up throwing, any instructions after the call instruction to the
eventually throwing subprog in callers will also never be marked as
seen.
The tempting way to fix this would be to emit extra 'int3' instructions
which bump the jited_len of a program, and ensure that during runtime
when a program throws, we can discover its boundaries even if the call
instruction to bpf_throw (or to subprogs that always throw) is emitted
as the final instruction in the program.
An example of such a program would be this:
do_something():
...
r0 = 0
exit
foo():
r1 = 0
call bpf_throw
r0 = 0
exit
bar(cond):
if r1 != 0 goto pc+2
call do_something
exit
call foo
r0 = 0 // Never seen by verifier
exit //
main(ctx):
r1 = ...
call bar
r0 = 0
exit
Here, if we do end up throwing, the stacktrace would be the following:
bpf_throw
foo
bar
main
In bar, the final instruction emitted will be the call to foo, as such,
the return address will be the subsequent instruction (which the JIT
emits as int3 on x86). This will end up lying outside the jited_len of
the program, thus, when unwinding, we will fail to discover the return
address as belonging to any program and end up in a panic due to the
unreliable stack unwinding of BPF programs that we never expect.
To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as
part of the BPF program, so that is_bpf_text_address returns true when
such a case occurs, and we are able to unwind reliably when the final
instruction ends up being a call instruction.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-12-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd381ce60a ]
When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer will still be alive after userspace
application releases or unpins the map. It also will lead to kmemleak
for old kernel version which doesn't release bpf_timer when map is
released.
bpf program X:
bpf_timer_init()
lock timer->lock
read timer->timer as NULL
read map->usercnt != 0
process Y:
close(map_fd)
// put last uref
bpf_map_put_uref()
atomic_dec_and_test(map->usercnt)
array_map_free_timers()
bpf_timer_cancel_and_free()
// just return
read timer->timer is NULL
t = bpf_map_kmalloc_node()
timer->timer = t
unlock timer->lock
Fix the problem by checking map->usercnt after timer->timer is assigned,
so when there are concurrent uref release and bpf timer init, either
bpf_timer_cancel_and_free() from uref release reads a no-NULL timer
or the newly-added atomic64_read() returns a zero usercnt.
Because atomic_dec_and_test(map->usercnt) and READ_ONCE(timer->timer)
in bpf_timer_cancel_and_free() are not protected by a lock, so add
a memory barrier to guarantee the order between map->usercnt and
timer->timer. Also use WRITE_ONCE(timer->timer, x) to match the lockless
read of timer->timer in bpf_timer_cancel_and_free().
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Closes: https://lore.kernel.org/bpf/CABcoxUaT2k9hWsS1tNgXyoU3E-=PuOgMn737qK984fbFmfYixQ@mail.gmail.com
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231030063616.1653024-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d35381aa73 ]
htab_lock_bucket uses the following logic to avoid recursion:
1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();
However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.
This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:
1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().
Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().
Fixes: 20b6cc34ea ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29a7e00ffa ]
When employed within a sleepable program not under RCU protection, the
use of 'bpf_task_under_cgroup()' may trigger a warning in the kernel log,
particularly when CONFIG_PROVE_RCU is enabled:
[ 1259.662357] WARNING: suspicious RCU usage
[ 1259.662358] 6.5.0+ #33 Not tainted
[ 1259.662360] -----------------------------
[ 1259.662361] include/linux/cgroup.h:423 suspicious rcu_dereference_check() usage!
Other info that might help to debug this:
[ 1259.662366] rcu_scheduler_active = 2, debug_locks = 1
[ 1259.662368] 1 lock held by trace/72954:
[ 1259.662369] #0: ffffffffb5e3eda0 (rcu_read_lock_trace){....}-{0:0}, at: __bpf_prog_enter_sleepable+0x0/0xb0
Stack backtrace:
[ 1259.662385] CPU: 50 PID: 72954 Comm: trace Kdump: loaded Not tainted 6.5.0+ #33
[ 1259.662391] Call Trace:
[ 1259.662393] <TASK>
[ 1259.662395] dump_stack_lvl+0x6e/0x90
[ 1259.662401] dump_stack+0x10/0x20
[ 1259.662404] lockdep_rcu_suspicious+0x163/0x1b0
[ 1259.662412] task_css_set.part.0+0x23/0x30
[ 1259.662417] bpf_task_under_cgroup+0xe7/0xf0
[ 1259.662422] bpf_prog_7fffba481a3bcf88_lsm_run+0x5c/0x93
[ 1259.662431] bpf_trampoline_6442505574+0x60/0x1000
[ 1259.662439] bpf_lsm_bpf+0x5/0x20
[ 1259.662443] ? security_bpf+0x32/0x50
[ 1259.662452] __sys_bpf+0xe6/0xdd0
[ 1259.662463] __x64_sys_bpf+0x1a/0x30
[ 1259.662467] do_syscall_64+0x38/0x90
[ 1259.662472] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 1259.662479] RIP: 0033:0x7f487baf8e29
[...]
[ 1259.662504] </TASK>
This issue can be reproduced by executing a straightforward program, as
demonstrated below:
SEC("lsm.s/bpf")
int BPF_PROG(lsm_run, int cmd, union bpf_attr *attr, unsigned int size)
{
struct cgroup *cgrp = NULL;
struct task_struct *task;
int ret = 0;
if (cmd != BPF_LINK_CREATE)
return 0;
// The cgroup2 should be mounted first
cgrp = bpf_cgroup_from_id(1);
if (!cgrp)
goto out;
task = bpf_get_current_task_btf();
if (bpf_task_under_cgroup(task, cgrp))
ret = -1;
bpf_cgroup_release(cgrp);
out:
return ret;
}
After running the program, if you subsequently execute another BPF program,
you will encounter the warning.
It's worth noting that task_under_cgroup_hierarchy() is also utilized by
bpf_current_task_under_cgroup(). However, bpf_current_task_under_cgroup()
doesn't exhibit this issue because it cannot be used in sleepable BPF
programs.
Fixes: b5ad4cdc46 ("bpf: Add bpf_task_under_cgroup() kfunc")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Cc: Feng Zhou <zhoufeng.zf@bytedance.com>
Cc: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20231007135945.4306-1-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06d686f771 ]
The kfunc code to handle KF_ARG_PTR_TO_CALLBACK does not check the reg
type before using reg->subprogno. This can accidently permit invalid
pointers from being passed into callback helpers (e.g. silently from
different paths). Likewise, reg->subprogno from the per-register type
union may not be meaningful either. We need to reject any other type
except PTR_TO_FUNC.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Fixes: 5d92ddc3de ("bpf: Add callback validation to kfunc verifier logic")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-14-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b5dcb31a1 ]
From commit ebf7d1f508 ("bpf, x64: rework pro/epilogue and tailcall
handling in JIT"), the tailcall on x64 works better than before.
From commit e411901c0b ("bpf: allow for tailcalls in BPF subprograms
for x64 JIT"), tailcall is able to run in BPF subprograms on x64.
From commit 5b92a28aae ("bpf: Support attaching tracing BPF program
to other BPF programs"), BPF program is able to trace other BPF programs.
How about combining them all together?
1. FENTRY/FEXIT on a BPF subprogram.
2. A tailcall runs in the BPF subprogram.
3. The tailcall calls the subprogram's caller.
As a result, a tailcall infinite loop comes up. And the loop would halt
the machine.
As we know, in tail call context, the tail_call_cnt propagates by stack
and rax register between BPF subprograms. So do in trampolines.
Fixes: ebf7d1f508 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Fixes: e411901c0b ("bpf: allow for tailcalls in BPF subprograms for x64 JIT")
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230912150442.2009-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829955981c ]
The verifier, as part of check_return_code(), verifies that async
callbacks such as from e.g. timers, will return 0. It does this by
correctly checking that R0->var_off is in tnum_const(0), which
effectively checks that it's in a range of 0. If this condition fails,
however, it prints an error message which says that the value should
have been in (0x0; 0x1). This results in possibly confusing output such
as the following in which an async callback returns 1:
At async callback the register R0 has value (0x1; 0x0) should have been in (0x0; 0x1)
The fix is easy -- we should just pass the tnum_const(0) as the correct
range to verbose_invalid_scalar(), which will then print the following:
At async callback the register R0 has value (0x1; 0x0) should have been in (0x0; 0x0)
Fixes: bfc6bb74e4 ("bpf: Implement verifier support for validation of async callbacks.")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231009161414.235829-1-void@manifault.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81335f90e8 ]
In mark_chain_precision() logic, when we reach the entry to a global
func, it is expected that R1-R5 might be still requested to be marked
precise. This would correspond to some integer input arguments being
tracked as precise. This is all expected and handled as a special case.
What's not expected is that we'll leave backtrack_state structure with
some register bits set. This is because for subsequent precision
propagations backtrack_state is reused without clearing masks, as all
code paths are carefully written in a way to leave empty backtrack_state
with zeroed out masks, for speed.
The fix is trivial, we always clear register bit in the register mask, and
then, optionally, set reg->precise if register is SCALAR_VALUE type.
Reported-by: Chris Mason <clm@meta.com>
Fixes: be2ef81615 ("bpf: allow precision tracking for programs with subprogs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230918210110.2241458-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a49f4195d ]
Fix for a bug observable under the following sequence of events:
1. Create a network device that does not support XDP offload.
2. Load a device bound XDP program with BPF_F_XDP_DEV_BOUND_ONLY flag
(such programs are not offloaded).
3. Load a device bound XDP program with zero flags
(such programs are offloaded).
At step (2) __bpf_prog_dev_bound_init() associates with device (1)
a dummy bpf_offload_netdev struct with .offdev field set to NULL.
At step (3) __bpf_prog_dev_bound_init() would reuse dummy struct
allocated at step (2).
However, downstream usage of the bpf_offload_netdev assumes that
.offdev field can't be NULL, e.g. in bpf_prog_offload_verifier_prep().
Adjust __bpf_prog_dev_bound_init() to require bpf_offload_netdev
with non-NULL .offdev for offloaded BPF programs.
Fixes: 2b3486bc2d ("bpf: Introduce device-bound XDP programs")
Reported-by: syzbot+291100dcb32190ec02a8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/000000000000d97f3c060479c4f8@google.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912005539.2248244-2-eddyz87@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a34a9f1a19 ]
Sysbot discovered that the queue and stack maps can deadlock if they are
being used from a BPF program that can be called from NMI context (such as
one that is attached to a perf HW counter event). To fix this, add an
in_nmi() check and use raw_spin_trylock() in NMI context, erroring out if
grabbing the lock fails.
Fixes: f1a2e44a3a ("bpf: add queue and stack maps")
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Tested-by: Hsin-Wei Hung <hsinweih@uci.edu>
Co-developed-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230911132815.717240-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0816b8c6bf ]
An earlier patch in the series ensures that the underlying memory of
nodes with bpf_refcount - which can have multiple owners - is not reused
until RCU grace period has elapsed. This prevents
use-after-free with non-owning references that may point to
recently-freed memory. While RCU read lock is held, it's safe to
dereference such a non-owning ref, as by definition RCU GP couldn't have
elapsed and therefore underlying memory couldn't have been reused.
From the perspective of verifier "trustedness" non-owning refs to
refcounted nodes are now trusted only in RCU CS and therefore should no
longer pass is_trusted_reg, but rather is_rcu_reg. Let's mark them
MEM_RCU in order to reflect this new state.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230821193311.3290257-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a5a148aaf ]
bpf_probe_read_kernel() has a __weak definition in core.c and another
definition with an incompatible prototype in kernel/trace/bpf_trace.c,
when CONFIG_BPF_EVENTS is enabled.
Since the two are incompatible, there cannot be a shared declaration in
a header file, but the lack of a prototype causes a W=1 warning:
kernel/bpf/core.c:1638:12: error: no previous prototype for 'bpf_probe_read_kernel' [-Werror=missing-prototypes]
On 32-bit architectures, the local prototype
u64 __weak bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr)
passes arguments in other registers as the one in bpf_trace.c
BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
const void *, unsafe_ptr)
which uses 64-bit arguments in pairs of registers.
As both versions of the function are fairly simple and only really
differ in one line, just move them into a header file as an inline
function that does not add any overhead for the bpf_trace.c callers
and actually avoids a function call for the other one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ac25cb0f-b804-1649-3afb-1dc6138c2716@iogearbox.net/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230801111449.185301-1-arnd@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55d49f750b ]
The commit c83597fa5d ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.
This missing uncharge only happens when the sk is going away (during
__sk_destruct).
This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.
A selftest is added in the next patch.
Fixes: c83597fa5d ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a96a44aba5 ]
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.
This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.
Fixes: b00fa38a9c ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6764e767f4 ]
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.
__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.
Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.
Fixes: e384c7b7b4 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7645629f7d ]
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).
This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.
Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.
Fixes: b1d18a7574 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6785b2edf4 ]
The commit being fixed introduced a hunk into check_func_arg_reg_off
that bypasses reg->off == 0 enforcement when offset points to a graph
node or root. This might possibly be done for treating bpf_rbtree_remove
and others as KF_RELEASE and then later check correct reg->off in helper
argument checks.
But this is not the case, those helpers are already not KF_RELEASE and
permit non-zero reg->off and verify it later to match the subobject in
BTF type.
However, this logic leads to bpf_obj_drop permitting free of register
arguments with non-zero offset when they point to a graph root or node
within them, which is not ok.
For instance:
struct foo {
int i;
int j;
struct bpf_rb_node node;
};
struct foo *f = bpf_obj_new(typeof(*f));
if (!f) ...
bpf_obj_drop(f); // OK
bpf_obj_drop(&f->i); // still ok from verifier PoV
bpf_obj_drop(&f->node); // Not OK, but permitted right now
Fix this by dropping the whole part of code altogether.
Fixes: 6a3cd3318f ("bpf: Migrate release_on_unlock logic to non-owning ref semantics")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33937607ef ]
We are utilizing BPF LSM to monitor BPF operations within our container
environment. When we add support for raw_tracepoint, it hits below
error.
; (const void *)attr->raw_tracepoint.name);
27: (79) r3 = *(u64 *)(r2 +0)
access beyond the end of member map_type (mend:4) in struct (anon) with off 0 size 8
It can be reproduced with below BPF prog.
SEC("lsm/bpf")
int BPF_PROG(bpf_audit, int cmd, union bpf_attr *attr, unsigned int size)
{
switch (cmd) {
case BPF_RAW_TRACEPOINT_OPEN:
bpf_printk("raw_tracepoint is %s", attr->raw_tracepoint.name);
break;
default:
break;
}
return 0;
}
The reason is that when accessing a field in a union, such as bpf_attr,
if the field is located within a nested struct that is not the first
member of the union, it can result in incorrect field verification.
union bpf_attr {
struct {
__u32 map_type; <<<< Actually it will find that field.
__u32 key_size;
__u32 value_size;
...
};
...
struct {
__u64 name; <<<< We want to verify this field.
__u32 prog_fd;
} raw_tracepoint;
};
Considering the potential deep nesting levels, finding a perfect
solution to address this issue has proven challenging. Therefore, I
propose a solution where we simply skip the verification process if the
field in question is located within a union.
Fixes: 7e3617a72d ("bpf: Add array support to btf_struct_access")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230713025642.27477-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce4dc3e4a ]
Per discussion with Alexei, the PTR_UNTRUSTED flag should not been
cleared when we start to walk a new struct, because the struct in
question may be a struct nested in a union. We should also check and set
this flag before we walk its each member, in case itself is a union.
We will clear this flag if the field is BTF_TYPE_SAFE_RCU_OR_NULL.
Fixes: 6fcd486b3a ("bpf: Refactor RCU enforcement in the verifier.")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230713025642.27477-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The following warning was reported when running xdp_redirect_cpu with
both skb-mode and stress-mode enabled:
------------[ cut here ]------------
Incorrect XDP memory type (-2128176192) usage
WARNING: CPU: 7 PID: 1442 at net/core/xdp.c:405
Modules linked in:
CPU: 7 PID: 1442 Comm: kworker/7:0 Tainted: G 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events __cpu_map_entry_free
RIP: 0010:__xdp_return+0x1e4/0x4a0
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
? __xdp_return+0x1e4/0x4a0
......
xdp_return_frame+0x4d/0x150
__cpu_map_entry_free+0xf9/0x230
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The reason for the warning is twofold. One is due to the kthread
cpu_map_kthread_run() is stopped prematurely. Another one is
__cpu_map_ring_cleanup() doesn't handle skb mode and treats skbs in
ptr_ring as XDP frames.
Prematurely-stopped kthread will be fixed by the preceding patch and
ptr_ring will be empty when __cpu_map_ring_cleanup() is called. But
as the comments in __cpu_map_ring_cleanup() said, handling and freeing
skbs in ptr_ring as well to "catch any broken behaviour gracefully".
Fixes: 11941f8a85 ("bpf: cpumap: Implement generic cpumap")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-3-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:
------------[ cut here ]------------
WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events cpu_map_kthread_stop
RIP: 0010:put_cpu_map_entry+0xda/0x220
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
......
? put_cpu_map_entry+0xda/0x220
cpu_map_kthread_stop+0x41/0x60
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The root cause is the same as commit 4369016497 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it.
Fixes: 6710e11269 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20230729095107.1722450-2-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
While the check_max_stack_depth function explores call chains emanating
from the main prog, which is typically enough to cover all possible call
chains, it doesn't explore those rooted at async callbacks unless the
async callback will have been directly called, since unlike non-async
callbacks it skips their instruction exploration as they don't
contribute to stack depth.
It could be the case that the async callback leads to a callchain which
exceeds the stack depth, but this is never reachable while only
exploring the entry point from main subprog. Hence, repeat the check for
the main subprog *and* all async callbacks marked by the symbolic
execution pass of the verifier, as execution of the program may begin at
any of them.
Consider functions with following stack depths:
main: 256
async: 256
foo: 256
main:
rX = async
bpf_timer_set_callback(...)
async:
foo()
Here, async is not descended as it does not contribute to stack depth of
main (since it is referenced using bpf_pseudo_func and not
bpf_pseudo_call). However, when async is invoked asynchronously, it will
end up breaching the MAX_BPF_STACK limit by calling foo.
Hence, in addition to main, we also need to explore call chains
beginning at all async callback subprogs in a program.
Fixes: 7ddc80a476 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The assignment to idx in check_max_stack_depth happens once we see a
bpf_pseudo_call or bpf_pseudo_func. This is not an issue as the rest of
the code performs a few checks and then pushes the frame to the frame
stack, except the case of async callbacks. If the async callback case
causes the loop iteration to be skipped, the idx assignment will be
incorrect on the next iteration of the loop. The value stored in the
frame stack (as the subprogno of the current subprog) will be incorrect.
This leads to incorrect checks and incorrect tail_call_reachable
marking. Save the target subprog in a new variable and only assign to
idx once we are done with the is_async_cb check which may skip pushing
of frame to the frame stack and subsequent stack depth checks and tail
call markings.
Fixes: 7ddc80a476 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The check_max_stack_depth pass happens after the verifier's symbolic
execution, and attempts to walk the call graph of the BPF program,
ensuring that the stack usage stays within bounds for all possible call
chains. There are two cases to consider: bpf_pseudo_func and
bpf_pseudo_call. In the former case, the callback pointer is loaded into
a register, and is assumed that it is passed to some helper later which
calls it (however there is no way to be sure), but the check remains
conservative and accounts the stack usage anyway. For this particular
case, asynchronous callbacks are skipped as they execute asynchronously
when their corresponding event fires.
The case of bpf_pseudo_call is simpler and we know that the call is
definitely made, hence the stack depth of the subprog is accounted for.
However, the current check still skips an asynchronous callback even if
a bpf_pseudo_call was made for it. This is erroneous, as it will miss
accounting for the stack usage of the asynchronous callback, which can
be used to breach the maximum stack depth limit.
Fix this by only skipping asynchronous callbacks when the instruction is
not a pseudo call to the subprog.
Fixes: 7ddc80a476 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230705144730.235802-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-06-23
We've added 49 non-merge commits during the last 24 day(s) which contain
a total of 70 files changed, 1935 insertions(+), 442 deletions(-).
The main changes are:
1) Extend bpf_fib_lookup helper to allow passing the route table ID,
from Louis DeLosSantos.
2) Fix regsafe() in verifier to call check_ids() for scalar registers,
from Eduard Zingerman.
3) Extend the set of cpumask kfuncs with bpf_cpumask_first_and()
and a rework of bpf_cpumask_any*() kfuncs. Additionally,
add selftests, from David Vernet.
4) Fix socket lookup BPF helpers for tc/XDP to respect VRF bindings,
from Gilad Sever.
5) Change bpf_link_put() to use workqueue unconditionally to fix it
under PREEMPT_RT, from Sebastian Andrzej Siewior.
6) Follow-ups to address issues in the bpf_refcount shared ownership
implementation, from Dave Marchevsky.
7) A few general refactorings to BPF map and program creation permissions
checks which were part of the BPF token series, from Andrii Nakryiko.
8) Various fixes for benchmark framework and add a new benchmark
for BPF memory allocator to BPF selftests, from Hou Tao.
9) Documentation improvements around iterators and trusted pointers,
from Anton Protopopov.
10) Small cleanup in verifier to improve allocated object check,
from Daniel T. Lee.
11) Improve performance of bpf_xdp_pointer() by avoiding access
to shared_info when XDP packet does not have frags,
from Jesper Dangaard Brouer.
12) Silence a harmless syzbot-reported warning in btf_type_id_size(),
from Yonghong Song.
13) Remove duplicate bpfilter_umh_cleanup in favor of umd_cleanup_helper,
from Jarkko Sakkinen.
14) Fix BPF selftests build for resolve_btfids under custom HOSTCFLAGS,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (49 commits)
bpf, docs: Document existing macros instead of deprecated
bpf, docs: BPF Iterator Document
selftests/bpf: Fix compilation failure for prog vrf_socket_lookup
selftests/bpf: Add vrf_socket_lookup tests
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Factor out socket lookup functions for the TC hookpoint.
selftests/bpf: Set the default value of consumer_cnt as 0
selftests/bpf: Ensure that next_cpu() returns a valid CPU number
selftests/bpf: Output the correct error code for pthread APIs
selftests/bpf: Use producer_cnt to allocate local counter array
xsk: Remove unused inline function xsk_buff_discard()
bpf: Keep BPF_PROG_LOAD permission checks clear of validations
bpf: Centralize permissions checks for all BPF map types
bpf: Inline map creation logic in map_create() function
bpf: Move unprivileged checks into map_create() and bpf_prog_load()
bpf: Remove in_atomic() from bpf_link_put().
selftests/bpf: Verify that check_ids() is used for scalars in regsafe()
bpf: Verify scalar ids mapping in regsafe() using check_ids()
selftests/bpf: Check if mark_chain_precision() follows scalar ids
...
====================
Link: https://lore.kernel.org/r/20230623211256.8409-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We currently allow to create perf link for program with
expected_attach_type == BPF_TRACE_KPROBE_MULTI.
This will cause crash when we call helpers like get_attach_cookie or
get_func_ip in such program, because it will call the kprobe_multi's
version (current->bpf_ctx context setup) of those helpers while it
expects perf_link's current->bpf_ctx context setup.
Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type
only for programs attaching through kprobe_multi link.
Fixes: ca74823c6e ("bpf: Add cookie support to programs attached with kprobe multi link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.
In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.
Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:
- > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue
- <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
which case GNU as will be used
Fixes: 1dc9285184 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
Move out flags validation and license checks out of the permission
checks. They were intermingled, which makes subsequent changes harder.
Clean this up: perform straightforward flag validation upfront, and
fetch and check license later, right where we use it. Also consolidate
capabilities check in one block, right after basic attribute sanity
checks.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-5-andrii@kernel.org
This allows to do more centralized decisions later on, and generally
makes it very explicit which maps are privileged and which are not
(e.g., LRU_HASH and LRU_PERCPU_HASH, which are privileged HASH variants,
as opposed to unprivileged HASH and HASH_PERCPU; now this is explicit
and easy to verify).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-4-andrii@kernel.org
Currently find_and_alloc_map() performs two separate functions: some
argument sanity checking and partial map creation workflow hanling.
Neither of those functions are self-sufficient and are augmented by
further checks and initialization logic in the caller (map_create()
function). So unify all the sanity checks, permission checks, and
creation and initialization logic in one linear piece of code in
map_create() instead. This also make it easier to further enhance
permission checks and keep them located in one place.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-3-andrii@kernel.org
Make each bpf() syscall command a bit more self-contained, making it
easier to further enhance it. We move sysctl_unprivileged_bpf_disabled
handling down to map_create() and bpf_prog_load(), two special commands
in this regard.
Also swap the order of checks, calling bpf_capable() only if
sysctl_unprivileged_bpf_disabled is true, avoiding unnecessary audit
messages.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230613223533.3689589-2-andrii@kernel.org
bpf_free_inode() is invoked as a RCU callback. Usually RCU callbacks are
invoked within softirq context. By setting rcutree.use_softirq=0 boot
option the RCU callbacks will be invoked in a per-CPU kthread with
bottom halves disabled which implies a RCU read section.
On PREEMPT_RT the context remains fully preemptible. The RCU read
section however does not allow schedule() invocation. The latter happens
in mutex_lock() performed by bpf_trampoline_unlink_prog() originated
from bpf_link_put().
It was pointed out that the bpf_link_put() invocation should not be
delayed if originated from close(). It was also pointed out that other
invocations from within a syscall should also avoid the workqueue.
Everyone else should use workqueue by default to remain safe in the
future (while auditing the code, every caller was preemptible except for
the RCU case).
Let bpf_link_put() use the worker unconditionally. Add
bpf_link_put_direct() which will directly free the resources and is used
by close() and from within __sys_bpf().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230614083430.oENawF8f@linutronix.de
Make sure that the following unsafe example is rejected by verifier:
1: r9 = ... some pointer with range X ...
2: r6 = ... unbound scalar ID=a ...
3: r7 = ... unbound scalar ID=b ...
4: if (r6 > r7) goto +1
5: r6 = r7
6: if (r6 > X) goto ...
--- checkpoint ---
7: r9 += r7
8: *(u64 *)r9 = Y
This example is unsafe because not all execution paths verify r7 range.
Because of the jump at (4) the verifier would arrive at (6) in two states:
I. r6{.id=b}, r7{.id=b} via path 1-6;
II. r6{.id=a}, r7{.id=b} via path 1-4, 6.
Currently regsafe() does not call check_ids() for scalar registers,
thus from POV of regsafe() states (I) and (II) are identical. If the
path 1-6 is taken by verifier first, and checkpoint is created at (6)
the path [1-4, 6] would be considered safe.
Changes in this commit:
- check_ids() is modified to disallow mapping multiple old_id to the
same cur_id.
- check_scalar_ids() is added, unlike check_ids() it treats ID zero as
a unique scalar ID.
- check_scalar_ids() needs to generate temporary unique IDs, field
'tmp_id_gen' is added to bpf_verifier_env::idmap_scratch to
facilitate this.
- regsafe() is updated to:
- use check_scalar_ids() for precise scalar registers.
- compare scalar registers using memcmp only for explore_alu_limits
branch. This simplifies control flow for scalar case, and has no
measurable performance impact.
- check_alu_op() is updated to avoid generating bpf_reg_state::id for
constant scalar values when processing BPF_MOV. ID is needed to
propagate range information for identical values, but there is
nothing to propagate for constants.
Fixes: 75748837b7 ("bpf: Propagate scalar ranges through register assignments.")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230613153824.3324830-4-eddyz87@gmail.com
Change mark_chain_precision() to track precision in situations
like below:
r2 = unknown value
...
--- state #0 ---
...
r1 = r2 // r1 and r2 now share the same ID
...
--- state #1 {r1.id = A, r2.id = A} ---
...
if (r2 > 10) goto exit; // find_equal_scalars() assigns range to r1
...
--- state #2 {r1.id = A, r2.id = A} ---
r3 = r10
r3 += r1 // need to mark both r1 and r2
At the beginning of the processing of each state, ensure that if a
register with a scalar ID is marked as precise, all registers sharing
this ID are also marked as precise.
This property would be used by a follow-up change in regsafe().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230613153824.3324830-2-eddyz87@gmail.com
When subprograms are in use, the main program is not jit'd after the
subprograms because jit_subprogs sets a value for prog->bpf_func upon
success. Subsequent calls to the JIT are bypassed when this value is
non-NULL. This leads to a situation where the main program and its
func[0] counterpart are both in the bpf kallsyms tree, but only func[0]
has an extable. Extables are only created during JIT. Now there are
two nearly identical program ksym entries in the tree, but only one has
an extable. Depending upon how the entries are placed, there's a chance
that a fault will call search_extable on the aux with the NULL entry.
Since jit_subprogs already copies state from func[0] to the main
program, include the extable pointer in this state duplication.
Additionally, ensure that the copy of the main program in func[0] is not
added to the bpf_prog_kallsyms table. Instead, let the main program get
added later in bpf_prog_load(). This ensures there is only a single
copy of the main program in the kallsyms table, and that its tag matches
the tag observed by tooling like bpftool.
Cc: stable@vger.kernel.org
Fixes: 1c2a088a66 ("bpf: x64: add JIT support for multi-function programs")
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/6de9b2f4b4724ef56efbb0339daaa66c8b68b1e7.1686616663.git.kjlx@templeofstupid.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We currently export the bpf_cpumask_any() and bpf_cpumask_any_and()
kfuncs. Intuitively, one would expect these to choose any CPU in the
cpumask, but what they actually do is alias to cpumask_first() and
cpmkas_first_and().
This is useless given that we already export bpf_cpumask_first() and
bpf_cpumask_first_and(), so this patch replaces them with kfuncs that
call cpumask_any_distribute() and cpumask_any_and_distribute(), which
actually choose any CPU from the cpumask (or the AND of two cpumasks for
the latter).
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We currently provide bpf_cpumask_first(), bpf_cpumask_any(), and
bpf_cpumask_any_and() kfuncs. bpf_cpumask_any() and
bpf_cpumask_any_and() are confusing misnomers in that they actually just
call cpumask_first() and cpumask_first_and() respectively.
We'll replace them with bpf_cpumask_any_distribute() and
bpf_cpumask_any_distribute_and() kfuncs in a subsequent patch, so let's
ensure feature parity by adding a bpf_cpumask_first_and() kfunc to
account for bpf_cpumask_any_and() being removed.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This function is only used when CONFIG_BPF_JIT_ALWAYS_ON is disabled, but
CONFIG_BPF_SYSCALL is enabled. When both are turned off, the prototype is
missing but the unused function is still compiled, as seen from this W=1
warning:
[...]
kernel/bpf/core.c:2075:6: error: no previous prototype for 'bpf_patch_call_args' [-Werror=missing-prototypes]
[...]
Add a matching #ifdef for the definition to leave it out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230602135128.1498362-1-arnd@kernel.org
