There are two cases in which the min_def isn't used:
a) if FILS will be enabled
b) if FTM responder is enabled
Both of these apply to AP mode only, but for FILS we're
not checking that right now. Change the code to iterate
the interfaces and links using the channel context, and
check for AP mode for both, not just for FTM responder.
In the case of iwl_mvm_enable_fils() this might also fix
an issue where FILS is enabled for an IBSS network that
happens to be started on 6 GHz, though that's not very
likely to be possible due to regulatory.
However for RX OMI bandwidth reduction the driver needs
to use the min_def in client mode as well, in order to
actually reduce bandwidth when it requested that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241231135726.7b91025e103d.I4c99c03fd32363d574ab5e34798b6099401f0729@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Approximately three years ago, in commit ddb6b76b6f
("iwlwifi: yoyo: support TLV-based firmware reset"), the code
was (likely erroneously) changed to no longer treat error
interrupts as firmware errors. As a result, this meant that
the fw_restart counter was only applied in case of command
queue being stuck, which never seems to happen. Also, there's
no longer any way to set the mvm->fw_restart to a value that
doesn't match exactly the module parameter behaviour.
Instead of trying to fix this, simply remove the logic that
limits the number of restarts, it's clearly unused.
However, restore the logic that restart isn't unconditional,
by checking the module parameter.
Since the "fw_error" argument to iwl_mvm_nic_restart() is now
always true (except in the "never happens" case of CMD queue
stuck), just remove it too and treat command queue stuck the
same way as everything else.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b0489daf323c.I0cd3233b2214c5f06e059f746041b19d08647e40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a channel ctx is assigned to a link, we set the
LINK_CONTEXT_MODIFY_RATES_INFO to indicate that the rate fields are now
valid. But then we always take the rates of 2.4 GHz regardless of actual
used band.
This is because we are getting the band from bss_conf->chanctx_conf, but
this is assigned only after drv_assign_vif_chanctx returns, so we take
the bands of 2.4 GHz.
Fix it by taking the band from the iwl_mvm_link_info::phy_ctxt instead,
as this has already assigned in this point.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.11c2d3609609.I8fa59e29b6bb38e5d06f3536d54dfb2c5d5bab11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the driver handles SMPS decisions by tracking AP
capabilities, BT coexistence changes, sending necessary SMPS
frames to the AP, and updating firmware with RX chain info
using the RLC_CONFIG_CMD.
Starting with version 3 of the RLC_CONFIG_CMD, the firmware
takes over this responsibility. It now tracks SMPS, sends
frames, and configures the RLC.
In this patch:
1. Stop sending RLC_CONFIG_CMD when firmware supports RLC
offload (version 3), as rlc.rx_chain_info is not needed by
firmware, and no other field in the cmd is used.
2. Prevent the driver from forwarding any SMPS requests to
mac80211, i.e., the driver should not transmit SMPS frames
to the AP as firmware handles that.
3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS
conditionally based on RLC version.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This flag is annoying because it puts a lot of logic into mac80211
that could just as well be in the driver (only iwlmvm uses it) and
the implementation is also broken for MLO.
Remove the flag in favour of calling drv_mgd_prepare_tx() without
any conditions even for the deauth-while-assoc case. The drivers
that implement it can take the appropriate actions, which for the
only user of DEAUTH_NEED_MGD_TX_PREP (iwlmvm) is a bit more tricky
than the implementation in mac80211 is anyway, and all others have
no need and can just exit if info->was_assoc is set.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240627132527.94924bcc9c9e.I328a219e45f2e2724cd52e75bb9feee3bf21a463@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
PLDR (product level device reset) is a Windows term, and
is something the driver triggers there, AFAICT.
Really what 'pldr_sync' here wants to capture is whether
or not the firmware will/may do a product reset during
initialization, which makes the device drop off the bus,
requiring a rescan. If this is the case, obviously the
init will fail/time out, so we don't want to report all
kinds of errors etc., hence this tracking variable.
Rename it to 'fw_product_reset' to capture the meaning
better.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.ccf849642af8.I01dded6b2393771b7baf8b4b17336784d987c7c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
