ASoC: Updates for v6.14
This was quite a quiet release for what I imagine are holiday related
reasons, the diffstat is dominated by some Cirrus Logic Kunit tests.
There's the usual mix of small improvements and fixes, plus a few new
drivers and features. The diffstat includes some DRM changes due to
work on HDMI audio.
- Allow clocking on each DAI in an audio graph card to be configured
separately.
- Improved power management for Renesas RZ-SSI.
- KUnit testing for the Cirrus DSP framework.
- Memory to meory operation support for Freescale/NXP platforms.
- Support for pause operations in SOF.
- Support for Allwinner suinv F1C100s, Awinc AW88083, Realtek
ALC5682I-VE
One specific test condition: the default registers of p[j].reg ~
p[j+3].reg are 0, TASDEVICE_REG(0x00, 0x14, 0x38)(PLT_FLAG_REG),
TASDEVICE_REG(0x00, 0x14, 0x40)(SINEGAIN_REG), and
TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN2_REG). After first calibration,
they are freshed to TASDEVICE_REG(0x00, 0x1a, 0x20), TASDEVICE_REG(0x00,
0x16, 0x58)(PLT_FLAG_REG), TASDEVICE_REG(0x00, 0x14, 0x44)(SINEGAIN_REG),
and TASDEVICE_REG(0x00, 0x16, 0x64)(SINEGAIN2_REG) via "Calibration Start"
kcontrol. In second calibration, the p[j].reg ~ p[j+3].reg have already
become tas2781_cali_start_reg. However, p[j+2].reg, TASDEVICE_REG(0x00,
0x14, 0x44)(SINEGAIN_REG), will be freshed to TASDEVICE_REG(0x00, 0x16,
0x64), which is the third register in the input params of the kcontrol.
This is why only first calibration can work, the second-time, third-time
or more-time calibration always failed without reboot. Of course, if no
p[j].reg is in the list of tas2781_cali_start_reg, this stress test can
work well.
Fixes: 49e2e353fb ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241211043859.1328-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20241203200001.197295-14-afd@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") changes the arguments for various module symbol macros
including some that we've aded new uses for. Merge the commit up to
avoid problems in -next.
Signed-off-by: Mark Brown <broonie@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
The code is obtaining a GPIO reset using the reset GPIO
name "reset-gpios", but the gpiolib is already adding the
suffix "-gpios" to anything passed to this function and
will be looking for "reset-gpios-gpios" which is most
certainly not what the author desired.
Fix it up.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-2-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Calibrated data will be set to default after loading DSP config params,
which will cause speaker protection work abnormally. Reload calibrated
data after loading DSP config params. Remove declaration of unused API
which load calibrated data in wrong sequence, changed the copyright year
and correct file name in license
header.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240518141546.1742-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to downloading
corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
