When porting librseq commit:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
from librseq to the kernel selftests, the following line was missed
at the end of rseq_init():
rseq_size = get_rseq_kernel_feature_size();
which effectively leaves rseq_size initialized to -1U when glibc does not
have rseq support. glibc supports rseq from version 2.35 onwards.
In a following librseq commit
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
to mimic the libc behavior, a new approach is taken: don't set the
feature size in 'rseq_size' until at least one thread has successfully
registered. This allows using 'rseq_size' in fast-paths to test for both
registration status and available features. The caveat is that on libc
either all threads are registered or none are, while with bare librseq
it is the responsability of the user to register all threads using rseq.
This combines the changes from the following librseq git commits:
commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection")
commit c67d198627c2 ("Only set 'rseq_size' on first thread registration")
Fixes: a0cc649353 ("selftests/rseq: Fix mm_cid test failure")
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Raghavendra Rao Ananta <rananta@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Michael Jeanson <mjeanson@efficios.com>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 3bcbc20942 ("selftests/rseq: Play nice with binaries statically
linked against glibc 2.35+") which is now in Linus' tree introduced uses
of __weak but did nothing to ensure that a definition is provided for it
resulting in build failures for the rseq tests:
rseq.c:41:1: error: unknown type name '__weak'
__weak ptrdiff_t __rseq_offset;
^
rseq.c:41:17: error: expected ';' after top level declarator
__weak ptrdiff_t __rseq_offset;
^
;
rseq.c:42:1: error: unknown type name '__weak'
__weak unsigned int __rseq_size;
^
rseq.c:43:1: error: unknown type name '__weak'
__weak unsigned int __rseq_flags;
Fix this by using the definition from tools/include compiler.h.
Fixes: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Signed-off-by: Mark Brown <broonie@kernel.org>
Message-Id: <20230804-kselftest-rseq-build-v1-1-015830b66aa9@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To allow running rseq and KVM's rseq selftests as statically linked
binaries, initialize the various "trampoline" pointers to point directly
at the expect glibc symbols, and skip the dlysm() lookups if the rseq
size is non-zero, i.e. the binary is statically linked *and* the libc
registered its own rseq.
Define weak versions of the symbols so as not to break linking against
libc versions that don't support rseq in any capacity.
The KVM selftests in particular are often statically linked so that they
can be run on targets with very limited runtime environments, i.e. test
machines.
Fixes: 233e667e1a ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35")
Cc: Aaron Lewis <aaronlewis@google.com>
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230721223352.2333911-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When linking the selftests against a libc which does not handle rseq
registration (before 2.35), rseq thread registration silently succeed
even with CONFIG_RSEQ=n because it erroneously thinks that libc is
handling rseq registration.
This is caused by setting the rseq ownership flag only after the
rseq_available() check. It should rather be set before the
rseq_available() check.
Set the rseq_size to 0 (error value) immediately after the
rseq_available() check fails rather than in the thread registration
functions.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221122203932.231377-2-mathieu.desnoyers@efficios.com
When checking for libc rseq support in the library constructor, don't
only depend on the symbols presence, check that the registration was
completed.
This targets a scenario where the libc has rseq support but it is not
wired for the current architecture in 'bits/rseq.h', we want to fallback
to our internal registration mechanism.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20220614154830.1367382-4-mjeanson@efficios.com
glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread
data in the TCB, accessible at an offset from the thread pointer, rather
than through an actual Thread-Local Storage (TLS) variable, as the
Linux kernel selftests initially expected.
The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot
actively coexist in a process, because the kernel supports only a single
rseq registration per thread.
Here is the scheme introduced to ensure selftests can work both with an
older glibc and with glibc-2.35+:
- librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI.
- librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size,
__rseq_flags) using dlsym() in a librseq library constructor. If those
are found, copy their values into rseq_offset, rseq_size, and
rseq_flags.
- Else, if those glibc symbols are not found, handle rseq registration
from librseq and use its own IE-model TLS to implement the rseq ABI
per-thread storage.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-8-mathieu.desnoyers@efficios.com
The Linux kernel rseq uapi header has a broken layout for the
rseq_cs.ptr field on 32-bit little endian architectures. The entire
rseq_cs.ptr field is planned for removal, leaving only the 64-bit
rseq_cs.ptr64 field available.
Both glibc and librseq use their own copy of the Linux kernel uapi
header, where they introduce proper union fields to access to the 32-bit
low order bits of the rseq_cs pointer on 32-bit architectures.
Introduce a copy of the Linux kernel uapi headers in the Linux kernel
selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-2-mathieu.desnoyers@efficios.com
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
