commit 2dd2a883aa upstream.
Atm, it's possible that the interrupt handler is called when the device
is in D3 or some other low-power state. It can be due to another device
that is still in D0 state and shares the interrupt line with i915, or on
some platforms there could be spurious interrupts even without sharing
the interrupt line. The latter case was reported by Klaus Ethgen using a
Lenovo x61p machine (gen 4). He noticed this issue via a system
suspend/resume hang and bisected it to the following commit:
commit e11aa36230
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Jun 18 09:52:55 2014 -0700
drm/i915: use runtime irq suspend/resume in freeze/thaw
This is a problem, since in low-power states IIR will always read
0xffffffff resulting in an endless IRQ servicing loop.
Fix this by handling interrupts only when the driver explicitly enables
them and so it's guaranteed that the interrupt registers return a valid
value.
Note that this issue existed even before the above commit, since during
runtime suspend/resume we never unregistered the handler.
v2:
- clarify the purpose of smp_mb() vs. synchronize_irq() in the
code comment (Chris)
v3:
- no need for an explicit smp_mb(), we can assume that synchronize_irq()
and the mmio read/writes in the install hooks provide for this (Daniel)
- remove code comment as the remaining synchronize_irq() is self
explanatory (Daniel)
v4:
- drm_irq_uninstall() implies synchronize_irq(), so no need to call it
explicitly (Daniel)
Reference: https://lkml.org/lkml/2015/2/11/205
Reported-and-bisected-by: Klaus Ethgen <Klaus@Ethgen.ch>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dc6f20b98 upstream.
When reviewing patch that fixes VGA on BDW Halo Jani noticed that
we also had other ULT IDs that weren't listed there.
So this follow-up patch add these pci-ids as halo and fix comments
on i915_pciids.h
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d180d2bbb6 upstream.
As per the specififcation, the SB_DevFn is the PCI_DEVFN of the target
device and not the source. So PCI_DEVFN(2,0) is not correct. Further the
port ID should be enough to identify devices unless they are MFD. The
SB_DevFn was intended to remove ambiguity in case of these MFD devices.
For non MFD devices the recommendation for the target device IP was to
ignore these fields, but not all of them followed the recommendation.
Some like CCK ignore these fields and hence PCI_DEVFN(2, 0) works and so
does PCI_DEVFN(0, 0) as it works for DPIO. The issue came to light because
of GPIONC which was not getting programmed correctly with PCI_DEVFN(2, 0).
It turned out that this did not follow the recommendation and expected 0
in this field.
In general the recommendation is to use SB_DevFn as PCI_DEVFN(0, 0) for
all devices except target PCI devices.
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
commit 460822b0b1 upstream.
It's possible for invalidate_range_start mmu notifier callback to race
against userptr object release. If the gem object was released prior to
obtaining the spinlock in invalidate_range_start we're hitting null
pointer dereference.
Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close
Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close-overlap
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Jani: added code comment suggested by Chris]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
commit 0ca0968554 upstream.
Nothing in Bspec seems to indicate that we actually needs this, and it
looks like can't work since by this point the pipe is off and so
vblanks won't really happen any more.
Note that Bspec mentions that it takes a vblank for this bit to
change, but _only_ when enabling.
Dropping this code quenches an annoying backtrace introduced by the
more anal checking since
commit 51e31d49c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Sep 15 12:36:02 2014 +0200
drm/i915: Use generic vblank wait
Note: This fixes the fallout from the above commit, but does not address
the shortcomings of the IBX transcoder select workaround implementation
discussed during review [1].
[1] http://mid.gmane.org/87y4o7usxf.fsf@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86095
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
commit f0a1fb10e5 upstream.
This looked like an odd regression from
commit ec5cc0f9b0
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu Jun 12 10:28:55 2014 +0100
drm/i915: Restrict GPU boost to the RCS engine
but in reality it undercovered a much older coherency bug. The issue that
boosting the GPU frequency on the BCS ring was masking was that we could
wake the CPU up after completion of a BCS batch and inspect memory prior
to the write cache being fully evicted. In order to serialise the
breadcrumb interrupt (and so ensure that the CPU's view of memory is
coherent) we need to perform a post-sync operation in the MI_FLUSH_DW.
v2: Fix all the MI_FLUSH_DW (bsd plus the duplication in execlists).
Also fix the invalidate_domains mask in gen8_emit_flush() for ring !=
VCS.
Testcase: gpuX-rcs-gpu-read-after-write
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
commit 13f3fbe827 upstream.
commit 6dda730e55
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Jun 24 18:27:40 2014 +0300
drm/i915: respect the VBT minimum backlight brightness
introduced a bug which resulted in inconsistent brightness levels on
different machines. If a suspended was entered with the screen off some
machines would resume with the screen at minimum brightness and others
at maximum brightness.
The following commands can be used to produce this behavior.
xset dpms force off
sleep 1
sudo systemctl suspend
(resume ...)
The root cause of this problem is a comparison which checks to see if
the backlight level is zero when the panel is enabled. If it is zero,
it is set to the maximum level. Unfortunately, not all machines have a
minimum level of zero. On those machines the level is left at the
minimum instead of begin set to the maximum.
Fix the bug by updating the comparison to check for the minimum
backlight level instead of zero. Also, expand the comparison for
the possible case when the level is less than the minimum.
Fixes: 6dda730e55 ("respect the VBT minimum backlight brightness")
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f48a01651b upstream.
Commit 82460d972 ("drm/i915: Rework ppgtt init to no require an aliasing
ppgtt") introduced a regression on Broadwell, triggering the following
IOMMU fault at startup:
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
dmar: DRHD: handling fault status reg 2
dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 880000
DMAR:[fault reason 23] Unknown
fbcon: inteldrmfb (fb0) is primary device
Further commentary from Daniel:
I sugggested this change to David after staring at the offending patch
for a while. I have no idea and theory whatsoever why this would upset
the gpu less than the other way round. But it seems to work. David
promised to chase hw people a bit more to get a more meaningful answer.
Wrt the comment that this deletes: I've done some digging and afaict
loading context before ppgtt enable was once required before our recent
restructuring of the context/ppgtt init code: Before that context sw
setup (i.e. allocating the default context) and hw setup was smashed
together. Also the setup of the default context was the bit that
actually allocated the aliasing ppgtt structures. Which is the reason
for the context before ppgtt depency.
Or was, since with all the untangling there's no no real depency any
more (functional, who knows what the hw is doing), so the comment is
just stale.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af1a7301c7 upstream.
When creating a fence for a tiled object, only fence the area that
makes up the actual tiles. The object may be larger than the tiled
area and if we allow those extra addresses to be fenced, they'll
get converted to addresses beyond where the object is mapped. This
opens up the possiblity of writes beyond the end of object.
To prevent this, we adjust the size of the fence to only encompass
the area that makes up the actual tiles. The extra space is considered
un-tiled and now behaves as if it was a linear object.
Testcase: igt/gem_tiled_fence_overflow
Reported-by: Dan Hettena <danh@ghs.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 226e5ae9e5 upstream.
If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared
if the mutex debugging is enabled which introduces a race in our
mutex_is_locked_by() - i.e. we may inspect the old owner value before it
is acquired by the new task.
This is the root cause of this error:
# diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
# index 5cf6731..3ef3736 100644
# --- a/kernel/locking/mutex-debug.c
# +++ b/kernel/locking/mutex-debug.c
# @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock)
# DEBUG_LOCKS_WARN_ON(lock->owner != current);
#
# DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
# - mutex_clear_owner(lock);
# }
#
# /*
# * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug
# * mutexes so that we can do it here after we've verified state.
# */
# + mutex_clear_owner(lock);
# atomic_set(&lock->count, 1);
# }
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f1241ed1a upstream.
pps_{lock,unlock}() call intel_display_power_{get,put}() outside
pps_mutes to avoid deadlocks with the power_domain mutex. In theory
during aux transfers we should usually have the relevant power domain
references already held by some higher level code, so this should not
result in much overhead (exception being userspace i2c-dev access).
However thanks to the check_power_well() calls in
intel_display_power_{get/put}() we end up doing a few Punit reads for
each aux transfer. Obviously doing this for each byte transferred via
i2c-over-aux is not a good idea.
I can't think of a good way to keep check_power_well() while eliminating
the overhead, so let's just remove check_power_well() entirely.
Fixes a driver init time regression introduced by:
commit 773538e860
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu Sep 4 14:54:56 2014 +0300
drm/i915: Reset power sequencer pipe tracking when disp2d is off
Credit goes to Jani for figuring this out.
v2: Add the regression note in the commit message.
Cc: Egbert Eich <eich@suse.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86201
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Jani: s/intel_runtime_pm.c/intel_pm.c/g and wiggle for 3.18]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01f5a6261c upstream.
The VGA_2X_MODE bit apparently affects the display even when the VGA
plane is disabled. The bit will set by the BIOS when the panel width
is at least 1280 pixels. So by preserving the bit from the BIOS we
end up with corrupted display on machines with such high res panels.
I only have 1024x768 panels on my gen2 machines so never ran into
this problem.
The original reason for preserving the VGACNTR register was to make
my 830 survive S3 with acpi_sleep=s3_bios option. However after
further 830 fixes that option is no longer needed to make S3 work
and preserving VGACNTR doesn't seem to be necessary without it,
so we can just revert the entire patch.
This reverts
commit 69769f9a42
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Aug 15 01:22:08 2014 +0300
drm/i915: Preserve VGACNTR bits from the BIOS
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87171
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d47559ee8 upstream.
The flip stall detector kicks in when pending>=INTEL_FLIP_COMPLETE. That
means if we first call intel_prepare_page_flip() but don't call
intel_finish_page_flip(), the next stall check will erroneosly think
the page flip was somehow stuck.
With enough debug spew emitted from the interrupt handler my 830 hangs
when this happens. My theory is that the previous vblank interrupt gets
sufficiently delayed that the handler will see the pending bit set in
IIR, but ISR still has the bit set as well (ie. the flip was processed
by CS but didn't complete yet). In this case the handler will proceed
to call intel_check_page_flip() immediately after
intel_prepare_page_flip(). It then tries to print a backtrace for the
stuck flip WARN, which apparetly results in way too much debug spew
delaying interrupt processing further. That then seems to cause an
endless loop in the interrupt handler, and the machine is dead until
the watchdog kicks in and reboots. At least limiting the number of
iterations of the loop in the interrupt handler also prevented the
hang.
So it seems better to not call intel_prepare_page_flip() without
immediately calling intel_finish_page_flip(). The IIR/ISR trickery
avoids races here so this is a perfectly safe thing to do.
v2: Fix typo in commit message (checkpatch)
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88381
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85888
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c55018347 upstream.
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7d6f7d708 upstream.
Otherwise the MST resume paths can hit DPMS paths
which hit state checker paths, which hit WARN_ON,
because the state checker is inconsistent with the
hw.
This fixes a bunch of WARN_ON's on resume after
undocking.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b38705981 upstream.
In all likelihood we will do a few hundred errnoneous register
operations if we do a single invalid register access whilst the device
is suspended. As each instance causes a WARN, this floods the system
logs and can make the system unresponsive.
The warning was first introduced in
commit b2ec142cb0
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Fri Feb 21 13:52:25 2014 -0300
drm/i915: call assert_device_not_suspended at gen6_force_wake_work
and despite the claims the WARN is still encountered in the wild today.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d472fcc837 upstream.
The problem here is that SNA pins batchbuffers to etch out a bit more
performance. Iirc it started out as a w/a for i830M (which we've
implemented in the kernel since a long time already). The problem is
that the pin ioctl wasn't added in
commit d23db88c3a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri May 23 08:48:08 2014 +0200
drm/i915: Prevent negative relocation deltas from wrapping
Fix this by simply disallowing pinning from userspace so that the
kernel is in full control of batch placement again. Especially since
distros are moving towards running X as non-root, so most users won't
even be able to see any benefits.
UMS support is dead now, but we need this minimal patch for
backporting. Follow-up patch will remove the pin ioctl code
completely.
Note to backporters: You must have both
commit b45305fce5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Dec 17 16:21:27 2012 +0100
drm/i915: Implement workaround for broken CS tlb on i830/845
which laned in 3.8 and
commit c4d69da167
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Sep 8 14:25:41 2014 +0100
drm/i915: Evict CS TLBs between batches
which is also marked cc: stable. Otherwise this could introduce a
regression by disabling the userspace w/a without the kernel w/a being
fully functional on i830/45.
References: https://bugs.freedesktop.org/show_bug.cgi?id=76554#c116
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we just make sure vdd is off before suspending, but we don't
cancel the vdd off work. The work wil not touch vdd if
want_panel_vdd==false so in theory this is fine.
In the past that was perfectly fine since the vdd off work didn't do
anything when want_panel_vdd==false, so even if the work would have been
run during system resume before i915 has resumed, nothing would happen.
However since pps_lock() will now grab the power domain references before
it can check want_panel_vdd, we may end up toggling the power wells on/off
already before the driver has resumed. That is not really acceptable, so
cancel the vdd off work when suspending the encoder.
The problem appeared when pps_lock() was introduced in:
commit 773538e860
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu Sep 4 14:54:56 2014 +0300
drm/i915: Reset power sequencer pipe tracking when disp2d is off
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During a GPU reset we need to get pending page flip cleared out
since the ring contents are gone and flip will never complete
on its own. This used to work until the mmio vs. CS flip race
detection came about. That piece of code is looking for a
specific surface address in the SURFLIVE register, but as
a flip to that address may never happen the check may never
pass. So we should just skip the SURFLIVE and flip counter
checks when the GPU gets reset.
intel_display_handle_reset() tries to effectively complete
the flip anyway by calling .update_primary_plane(). But that
may not satisfy the conditions of the mmio vs. CS race
detection since there's no guarantee that a modeset didn't
sneak in between the GPU reset and intel_display_handle_reset().
Such a modeset will not wait for pending flips due to the ongoing GPU
reset, and then the primary plane updates performed by
intel_display_handle_reset() will already use the new surface
address, and thus the surface address the flip is waiting for
might never appear in SURFLIVE. The result is that the flip
will never complete and attempts to perform further page flips
will fail with -EBUSY.
During the GPU reset intel_crtc_has_pending_flip() will return
false regardless, so the deadlock with a modeset vs. the error
work acquiring crtc->mutex was avoided. And the reset_counter
check in intel_crtc_has_pending_flip() actually made this bug
even less severe since it allowed normal modesets to go through
even though there's a pending flip.
This is a regression introduced by me here:
commit 75f7f3ec60
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Tue Apr 15 21:41:34 2014 +0300
drm/i915: Fix mmio vs. CS flip race on ILK+
Testcase: igt/kms_flip/flip-vs-panning-vs-hang
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As obj->map_and_fenceable computation has changed to only be set when
the object is bound inside the global GTT (and is suitable aligned to a
fence region) we need to accommodate those changes when the tiling is
adjusted. The easiest solution is to unbind from the global GTT if we
are currently fenceable, but will not be after the tiling change.
The bug has been exposed by
commit f8fcadba218fe6d23b2e353fea1cf0a4be4c9454
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Oct 31 13:53:52 2014 +0000
drm/i915: Only mark as map-and-fenceable when bound into the GGTT
which tried to fix an oversight from
commit e6a844687c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon Aug 11 12:00:12 2014 +0200
drm/i915: Force CPU relocations if not GTT mapped
which changed the handling of obj->map_and_fenceable.
Note that the alignment check is a vestige from our attempts to reduce
the alignment requirements of tiled but unfenced buffers on
gen2/3. Also, that was when unbinding from the GTT meant UC writes and
clflushing, so we went to great pains to avoid such.
That leaves the actual bug of setting map_and_fenceable to true if we're
not bound to ggtt, which violates the change introduced in the above
patch. Unbinding in that case really looks like the simplest and safest
option, we have to do it anyway.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85896
Testcase: igt/gem_concurrent_blit/gttX*
Tested-by: huax.lu@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Valtteri Rantala <valtteri.rantala@intel.com>
[Jani: amend commit message per input from Daniel and bisect result from
Valtteri]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Never trust (your interpretation of) the VBT. Regression from
commit 6dda730e55
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Jun 24 18:27:40 2014 +0300
drm/i915: respect the VBT minimum backlight brightness
causing div by zero if VBT minimum brightness equals maximum brightness.
Despite my attempts I've failed in my detective work to figure out what
the root cause is. This is not the real fix, but we have to do
something.
Reported-by: Mike Auty <mike.auty@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=86551
Cc: stable@vger.kernel.org (v3.17+)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
During S4 freeze we don't call intel_suspend_complete(), which would
save the gunit HW state, but during S4 thaw/restore events we call
intel_resume_prepare() which restores it, thus ending up in a corrupted
HW state.
Fix this by calling intel_suspend_complete() from the corresponding
freeze_late event handler.
The issue was introduced in
commit 016970beb0
Author: Sagar Kamble <sagar.a.kamble@intel.com>
Date: Wed Aug 13 23:07:06 2014 +0530
CC: Sagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Global GTT doesn't have pat_sel[2:0] so it always point to pat_sel = 000;
So the only way to avoid screen corruptions is setting PAT 0 to Uncached.
MOCS can still be used though. But if userspace is trusting PTE for
cache selection the safest thing to do is to let caches disabled.
BSpec: "For GGTT, there is NO pat_sel[2:0] from the entry,
so RTL will always use the value corresponding to pat_sel = 000"
- System agent ggtt writes (i.e. cpu gtt mmaps) already work before
this patch, i.e. the same uncached + snooping access like on gen6/7
seems to be in effect.
- So this just fixes blitter/render access. Again it looks like it's
not just uncached access, but uncached + snooping. So we can still
hold onto all our assumptions wrt cpu clflushing on LLC machines.
v2: Cleaner patch as suggested by Chris.
v3: Add Daniel's comment
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=85576
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Stable@vger.kernel.org
Tested-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Turning vdd on/off can generate a long hpd pulse on eDP ports. In order
to handle hpd we would need to turn on vdd to perform aux transfers.
This would lead to an endless cycle of
"vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
So ignore long hpd pulses on eDP ports. eDP panels should be physically
tied to the machine anyway so they should not actually disappear and
thus don't need long hpd handling. Short hpds are still needed for link
re-train and whatnot so we can't just turn off the hpd interrupt
entirely for eDP ports. Perhaps we could turn it off whenever the panel
is disabled, but just ignoring the long hpd seems sufficient.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Sometimes we seem to get utter garbage from DPCD reads. The resulting
buffer is filled with the same byte, and the operation completed without
errors. My HP ZR24w monitor seems particularly susceptible to this
problem once it's gone into a sleep mode.
The issue seems to happen only for the first AUX message that wakes the
sink up. But as the first AUX read we often do is the DPCD receiver
cap it does wreak a bit of havoc with subsequent link training etc. when
the receiver cap bw/lane/etc. information is garbage.
A sufficient workaround seems to be to perform a single byte dummy read
before reading the actual data. I suppose that just wakes up the sink
sufficiently and we can just throw away the returned data in case it's
crap. DP_DPCD_REV seems like a sufficiently safe location to read here.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
first set of i915 fixes, all over.
* tag 'drm-intel-next-fixes-2014-10-17' of git://anongit.freedesktop.org/drm-intel:
drm/i915: fix short vs. long hpd detection
drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV
drm/i915: properly reenable gen8 pipe IRQs
drm/i915: Move DIV_ROUND_CLOSEST_ULL macro to header
drm/i915: intel_backlight scale() math WA
On CHV the display DDC pins may be muxed to an alternate function if
there's no need for DDC on a specific port, which is the case for eDP
ports since there's no way to plug in a DP++ HDMI dongle.
This causes problems when trying to determine if the port is present
since the the DP_DETECTED bit is the latched state of the DDC SDA pin
at boot. If the DDC pins are muxed to an alternate function the bit
may indicate that the port isn't present.
To work around this look at the VBT as well as the DP_DETECTED bit
to determine if we should attempt registering an eDP port. Do this
only for ports B and C since port D doesn't support eDP (no PPS/BLC).
In theory someone could also wire up a normal DP port w/o DDC lines.
That would just mean that simple DP++ HDMI dongles wouldn't work
on such a port. With this change we would still fail to register
such DP ports. But let's hope no one wires their board in such a way,
and if they do we can extend the VBT checks to cover normal DP ports
as well.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84265
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull drm updates from Dave Airlie:
"This is the main git pull for the drm,
I pretty much froze major pulls at -rc5/6 time, and haven't had much
fallout, so will probably continue doing that.
Lots of changes all over, big internal header cleanup to make it clear
drm features are legacy things and what are things that modern KMS
drivers should be using. Also big move to use the new generic fences
in all the TTM drivers.
core:
atomic prep work,
vblank rework changes, allows immediate vblank disables
major header reworking and cleanups to better delinate legacy
interfaces from what KMS drivers should be using.
cursor planes locking fixes
ttm:
move to generic fences (affects all TTM drivers)
ppc64 caching fixes
radeon:
userptr support,
uvd for old asics,
reset rework for fence changes
better buffer placement changes,
dpm feature enablement
hdmi audio support fixes
intel:
Cherryview work,
180 degree rotation,
skylake prep work,
execlist command submission
full ppgtt prep work
cursor improvements
edid caching,
vdd handling improvements
nouveau:
fence reworking
kepler memory clock work
gt21x clock work
fan control improvements
hdmi infoframe fixes
DP audio
ast:
ppc64 fixes
caching fix
rcar:
rcar-du DT support
ipuv3:
prep work for capture support
msm:
LVDS support for mdp4, new panel, gpu refactoring
exynos:
exynos3250 SoC support, drop bad mmap interface,
mipi dsi changes, and component match support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits)
drm/mst: rework payload table allocation to conform better.
drm/ast: Fix HW cursor image
drm/radeon/kv: add uvd/vce info to dpm debugfs output
drm/radeon/ci: add uvd/vce info to dpm debugfs output
drm/radeon: export reservation_object from dmabuf to ttm
drm/radeon: cope with foreign fences inside the reservation object
drm/radeon: cope with foreign fences inside display
drm/core: use helper to check driver features
drm/radeon/cik: write gfx ucode version to ucode addr reg
drm/radeon/si: print full CS when we hit a packet 0
drm/radeon: remove unecessary includes
drm/radeon/combios: declare legacy_connector_convert as static
drm/radeon/atombios: declare connector convert tables as static
drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table
drm/radeon/dpm: drop clk/voltage dependency filters for BTC
drm/radeon/dpm: drop clk/voltage dependency filters for CI
drm/radeon/dpm: drop clk/voltage dependency filters for SI
drm/radeon/dpm: drop clk/voltage dependency filters for NI
drm/radeon: disable audio when we disable hdmi (v2)
drm/radeon: split audio enable between eg and r600 (v2)
...
