Pass an instance of struct drm_format_conv_state to DRM's format
conversion helpers. Update all callers.
Most drivers can use the format-conversion state from their shadow-
plane state. The shadow plane's destroy function releases the
allocated buffer. Drivers will later be able to allocate a buffer
of appropriate size in their plane's atomic_check code.
The gud driver uses a separate thread for committing updates. For
now, the update worker contains its own format-conversion state.
Images in the format-helper tests are small. The tests preallocate
a static page for the temporary buffer. Unloading the module releases
the memory.
v6:
* update patch for ssd132x support
v5:
* avoid using unusupported shadow-plane state in repaper (Noralf)
* fix documentation (Noralf, kernel test robot)
v3:
* store buffer in shadow-plane state (Javier, Maxime)
* replace ARRAY_SIZE() with sizeof() (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com> # ssd130x
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009141018.11291-4-tzimmermann@suse.de
There are DRM fourcc formats that have pixels smaller than a byte, but the
conversion_buf_size() function assumes that pixels are a multiple of bytes
and use the struct drm_format_info .cpp field to calculate the dst_pitch.
Instead, calculate it by using the bits per pixel (bpp) and divide it by 8
to account for formats that have sub-byte pixels.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307215039.346863-1-javierm@redhat.com
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
Add conversion from XRGB8888 to XRGB1555, ARGB1555 and RGBA5551, which
are the formats currently supported by the simplefb infrastructure. The
new helpers allow the output of XRGB8888 framebuffers to firmware
scanout buffers in one of the 15-bit formats.
v3:
* use __le* for destination buffers (Jose, kernel test robot)
v2:
* test 15-bit results with local endianness (Jose)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-10-tzimmermann@suse.de
Use KUNIT_EXPECT_MEMEQ to compare memory blocks in replacement of the
KUNIT_EXPECT_EQ macro. Therefor, the statement
KUNIT_EXPECT_EQ(test, memcmp(foo, bar, size), 0);
is replaced by:
KUNIT_EXPECT_MEMEQ(test, foo, bar, size);
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The xrgb2101010 format conversion test (unlike for other formats) does
an endianness conversion on the results. However, it always converts
TEST_BUF_SIZE 32-bit integers, which results in reading from (and
writing to) more memory than in present in the result buffer. Instead,
use the buffer size, divided by sizeof(u32).
The issue could be reproduced with KASAN:
./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \
--kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \
--kconfig_add CONFIG_KASAN_KUNIT_TEST=y \
drm_format_helper_test.*xrgb2101010
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019073239.3779180-1-davidgow@google.com
Update XRGB8888-to-RGB332 conversion to support struct iosys_map
and convert all users. Although these are single-plane color formats,
the new interface supports multi-plane formats for consistency with
drm_fb_blit().
v2:
* rebase onto refactored Kunit tests
* update documentation (Sam)
* add TODO on vaddr location (Sam)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808125406.20752-6-tzimmermann@suse.de
Test the conversion from XRGB8888 to RGB332.
What is tested?
- Different values for the X in XRGB8888 to make sure it is ignored
- Different clip values: Single pixel and full and partial buffer
- Well known colors: White, black, red, green, blue, magenta, yellow
and cyan
- Other colors: Randomly picked
- Destination pitch
How to run the tests?
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/gpu/drm/tests \
--kconfig_add CONFIG_VIRTIO_UML=y \
--kconfig_add CONFIG_UML_PCI_OVER_VIRTIO=y
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620160640.3790-3-jose.exposito89@gmail.com
