Problem statement:
Since commit fc137c0dda ("sched/numa: enhance vma scanning logic"), the
Numa vma scan overhead has been reduced a lot. Meanwhile, the reducing of
the vma scan might create less Numa page fault information. The
insufficient information makes it harder for the Numa balancer to make
decision. Later, commit b7a5b537c5 ("sched/numa: Complete scanning of
partial VMAs regardless of PID activity") and commit 84db47ca71
("sched/numa: Fix mm numa_scan_seq based unconditional scan") are found to
bring back part of the performance.
Recently when running SPECcpu omnetpp_r on a 320 CPUs/2 Sockets system, a
long duration of remote Numa node read was observed by PMU events: A few
cores having ~500MB/s remote memory access for ~20 seconds. It causes
high core-to-core variance and performance penalty. After the
investigation, it is found that many vmas are skipped due to the active
PID check. According to the trace events, in most cases,
vma_is_accessed() returns false because the history access info stored in
pids_active array has been cleared.
Proposal:
The main idea is to adjust vma_is_accessed() to let it return true easier.
Thus compare the diff between mm->numa_scan_seq and
vma->numab_state->prev_scan_seq. If the diff has exceeded the threshold,
scan the vma.
This patch especially helps the cases where there are small number of
threads, like the process-based SPECcpu. Without this patch, if the
SPECcpu process access the vma at the beginning, then sleeps for a long
time, the pid_active array will be cleared. A a result, if this process
is woken up again, it never has a chance to set prot_none anymore.
Because only the first 2 times of access is granted for vma scan:
(current->mm->numa_scan_seq) - vma->numab_state->start_scan_seq) < 2 to be
worse, no other threads within the task can help set the prot_none. This
causes information lost.
Raghavendra helped test current patch and got the positive result
on the AMD platform:
autonumabench NUMA01
base patched
Amean syst-NUMA01 194.05 ( 0.00%) 165.11 * 14.92%*
Amean elsp-NUMA01 324.86 ( 0.00%) 315.58 * 2.86%*
Duration User 380345.36 368252.04
Duration System 1358.89 1156.23
Duration Elapsed 2277.45 2213.25
autonumabench NUMA02
Amean syst-NUMA02 1.12 ( 0.00%) 1.09 * 2.93%*
Amean elsp-NUMA02 3.50 ( 0.00%) 3.56 * -1.84%*
Duration User 1513.23 1575.48
Duration System 8.33 8.13
Duration Elapsed 28.59 29.71
kernbench
Amean user-256 22935.42 ( 0.00%) 22535.19 * 1.75%*
Amean syst-256 7284.16 ( 0.00%) 7608.72 * -4.46%*
Amean elsp-256 159.01 ( 0.00%) 158.17 * 0.53%*
Duration User 68816.41 67615.74
Duration System 21873.94 22848.08
Duration Elapsed 506.66 504.55
Intel 256 CPUs/2 Sockets:
autonuma benchmark also shows improvements:
v6.10-rc5 v6.10-rc5
+patch
Amean syst-NUMA01 245.85 ( 0.00%) 230.84 * 6.11%*
Amean syst-NUMA01_THREADLOCAL 205.27 ( 0.00%) 191.86 * 6.53%*
Amean syst-NUMA02 18.57 ( 0.00%) 18.09 * 2.58%*
Amean syst-NUMA02_SMT 2.63 ( 0.00%) 2.54 * 3.47%*
Amean elsp-NUMA01 517.17 ( 0.00%) 526.34 * -1.77%*
Amean elsp-NUMA01_THREADLOCAL 99.92 ( 0.00%) 100.59 * -0.67%*
Amean elsp-NUMA02 15.81 ( 0.00%) 15.72 * 0.59%*
Amean elsp-NUMA02_SMT 13.23 ( 0.00%) 12.89 * 2.53%*
v6.10-rc5 v6.10-rc5
+patch
Duration User 1064010.16 1075416.23
Duration System 3307.64 3104.66
Duration Elapsed 4537.54 4604.73
The SPECcpu remote node access issue disappears with the patch applied.
Link: https://lkml.kernel.org/r/20240827112958.181388-1-yu.c.chen@intel.com
Fixes: fc137c0dda ("sched/numa: enhance vma scanning logic")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Reviewed-and-tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By using a few values in the top byte, users of page_type can store up to
24 bits of additional data in page_type. It also reduces the code size as
(with replacement of READ_ONCE() with data_race()), the kernel can check
just a single byte. eg:
ffffffff811e3a79: 8b 47 30 mov 0x30(%rdi),%eax
ffffffff811e3a7c: 55 push %rbp
ffffffff811e3a7d: 48 89 e5 mov %rsp,%rbp
ffffffff811e3a80: 25 00 00 00 82 and $0x82000000,%eax
ffffffff811e3a85: 3d 00 00 00 80 cmp $0x80000000,%eax
ffffffff811e3a8a: 74 4d je ffffffff811e3ad9 <folio_mapping+0x69>
becomes:
ffffffff811e3a69: 80 7f 33 f5 cmpb $0xf5,0x33(%rdi)
ffffffff811e3a6d: 55 push %rbp
ffffffff811e3a6e: 48 89 e5 mov %rsp,%rbp
ffffffff811e3a71: 74 4d je ffffffff811e3ac0 <folio_mapping+0x60>
replacing three instructions with one.
[wangkefeng.wang@huawei.com: fix ubsan warnings]
Link: https://lkml.kernel.org/r/2d19c48a-c550-4345-bf36-d05cd303c5de@huawei.com
Link: https://lkml.kernel.org/r/20240821173914.2270383-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the CMA allocation succeeds but isn't addressable, its buffer has
already been released and the page is set to NULL. So later when the
normal page allocation succeeds but isn't addressable, __free_pages()
can be used to free that normal page rather than using
dma_free_contiguous that does extra checks that are not needed.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
- Resolve trivial context conflicts from dl_server clearing being moved
around.
- Add @next to put_prev_task_scx() and @prev to pick_next_task_scx() to
match sched/core.
- Merge sched_class->switch_class() addition from sched_ext with
tip/sched/core changes in __pick_next_task().
- Make pick_next_task_scx() call put_prev_task_scx() to emulate the previous
behavior where sched_class->put_prev_task() was called before
sched_class->pick_next_task().
While this makes sched_ext build and function, the behavior is not in line
with other sched classes. The follow-up patches will address the
discrepancies and remove sched_class->switch_class().
Signed-off-by: Tejun Heo <tj@kernel.org>
Use str_enabled_disabled() helper instead of open
coding the same.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In order to tell the previous sched_class what the next task is, add
put_prev_task(.next).
Notable SCX will use this to:
1) determine the next task will leave the SCX sched class and push
the current task to another CPU if possible.
2) statistics on how often and which other classes preempt it
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.367421076@infradead.org
When a task is selected through a dl_server, it will have p->dl_server
set, such that it can account runtime to the dl_server, see
update_curr_task().
Currently p->dl_server is set in pick*task() whenever it goes through
the dl_server, clearing it is a bit of a mess though. The trivial
solution is clearing it on the final put (now that we have this
location).
However, this gives a problem when:
p = pick_task(rq);
if (p)
put_prev_set_next_task(rq, prev, next);
picks the same task but through a different path, notably when it goes
from picking through the dl_server to a direct pick or vice-versa. In
that case we cannot readily determine wether we should clear or
preserve p->dl_server.
An additional complication is pick_*task() setting p->dl_server for a
remote pick, it might still need to update runtime before it schedules
the core_pick.
Close all these holes and remove all the random clearing of
p->dl_server by:
- having pick_*task() manage rq->dl_server
- having the final put_prev_task() clear p->dl_server
- having the first set_next_task() set p->dl_server = rq->dl_server
- complicate the core_sched code to save/restore rq->dl_server where
appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.259853414@infradead.org
The current rule is that:
pick_next_task() := pick_task() + set_next_task(.first = true)
And many classes implement it directly as such. Change things around
to make pick_next_task() optional while also changing the definition to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
The reason is that sched_ext would like to have a 'final' call that
knows the next task. By placing put_prev_task() right next to
set_next_task() (as it already is for sched_core) this becomes
trivial.
As a bonus, this is a nice cleanup on its own.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.051225657@infradead.org
__sched_setscheduler() goes through an enqueue/dequeue cycle like so:
flags := DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK;
prev_class->dequeue_task(rq, p, flags);
new_class->enqueue_task(rq, p, flags);
when prev_class := fair_sched_class, this is followed by:
dequeue_task(rq, p, DEQUEUE_NOCLOCK | DEQUEUE_SLEEP);
the idea being that since the task has switched classes, we need to drop
the sched_delayed logic and have that task be deactivated per its previous
dequeue_task(..., DEQUEUE_SLEEP).
Unfortunately, this leaves the task on_rq. This is missing the tail end of
dequeue_entities() that issues __block_task(), which __sched_setscheduler()
won't have done due to not using DEQUEUE_DELAYED - not that it should, as
it is pretty much a fair_sched_class specific thing.
Make switched_from_fair() properly deactivate sched_delayed tasks upon
class changes via __block_task(), as if a
dequeue_task(..., DEQUEUE_DELAYED)
had been issued.
Fixes: 2e0199df25 ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240829135353.1524260-1-vschneid@redhat.com
In dl_server_start(), when schedstats is enabled, the following
happens:
dl_server_start()
dl_se->dl_server = 1;
enqueue_dl_entity()
update_stats_enqueue_dl()
__schedstats_from_dl_se()
dl_task_of()
BUG_ON(dl_server(dl_se));
Since only tasks have schedstats and internal entries do not, avoid
trying to update stats in this case.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20240829031111.12142-1-shijie@os.amperecomputing.com
When analyzing a kernel waring message, Peter pointed out that there is a
race condition when the kworker is being frozen and falls into
try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a
might_sleep() warning in try_to_freeze(). Although the root cause is not
related to freeze()[1], it is still worthy to fix this issue ahead.
One possible race scenario:
CPU 0 CPU 1
----- -----
// kthread_worker_fn
set_current_state(TASK_INTERRUPTIBLE);
suspend_freeze_processes()
freeze_processes
static_branch_inc(&freezer_active);
freeze_kernel_threads
pm_nosig_freezing = true;
if (work) { //false
__set_current_state(TASK_RUNNING);
} else if (!freezing(current)) //false, been frozen
freezing():
if (static_branch_unlikely(&freezer_active))
if (pm_nosig_freezing)
return true;
schedule()
}
// state is still TASK_INTERRUPTIBLE
try_to_freeze()
might_sleep() <--- warning
Fix this by explicitly set the TASK_RUNNING before entering
try_to_freeze().
Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1]
Link: https://lkml.kernel.org/r/20240827112308.181081-1-yu.c.chen@intel.com
Fixes: b56c0d8937 ("kthread: implement kthread_worker")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When watchdog_hardlockup_probe() is being called by
lockup_detector_delay_init(), an error return of -ENODEV will happen
for the arm64 arch when arch_perf_nmi_is_available() returns false. This
means that NMI is not usable by the hard lockup detector and so has to
be disabled. This can be considered a deficiency in that particular
arm64 chip, but there is nothing we can do about it. That also means
the following error will always be reported when the kernel boot up.
watchdog: Delayed init of the lockup detector failed: -19
The word "failed" itself has a connotation that there is something
wrong with the kernel which is not really the case here. Handle this
special ENODEV case separately and explain the reason behind disabling
hard lockup detector without causing anxiety for those users who read
the above message and wonder about it.
Link: https://lkml.kernel.org/r/20240802151621.617244-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On x86_32 Qemu machine with 1GB memory, the cmdline "crashkernel=4G" is ok
as below:
crashkernel reserved: 0x0000000020000000 - 0x0000000120000000 (4096 MB)
It's similar on other architectures, such as ARM32 and RISCV32.
The cause is that the crash_size is parsed and printed with "unsigned long
long" data type which is 8 bytes but allocated used with "phys_addr_t"
which is 4 bytes in memblock_phys_alloc_range().
Fix it by checking if crash_size is greater than system RAM size and
return error if so.
After this patch, there is no above confusing reserve success info.
Link: https://lkml.kernel.org/r/20240729115252.1659112-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Dave Young <dyoung@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, memcg: cg2 memory{.swap,}.peak write handlers", v7.
This patch (of 2):
Other mechanisms for querying the peak memory usage of either a process or
v1 memory cgroup allow for resetting the high watermark. Restore parity
with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets
the high watermark.
- writing "5" to the clear_refs pseudo-file in a processes's proc
directory resets the peak RSS.
This change is an evolution of a previous patch, which mostly copied the
cgroup v1 behavior, however, there were concerns about races/ownership
issues with a global reset, so instead this change makes the reset
filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak
pseudo-files reset the high watermark to the current usage for subsequent
reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the
O(FDs that have written) behavior onto the FD write(2) path. Instead, on
the page-allocation path, we simply add one additional watermark to
conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the
page-charging-path checks for the two watermarks to reduce the number of
common-case comparisons.
This behavior is particularly useful for work scheduling systems that need
to track memory usage of worker processes/cgroups per-work-item. Since
memory can't be squeezed like CPU can (the OOM-killer has opinions), these
systems need to track the peak memory usage to compute system/container
fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global
binpacking across many Kubernetes pods/containers, and while we can use
PSI for some local decisions about overload, we strive to avoid packing
workloads too tightly in the first place. To facilitate this, we track
the peak memory usage. However, since we run with long-lived workers (to
amortize startup costs) we need a way to track the high watermark while a
work-item is executing. Polling runs the risk of missing short spikes
that last for timescales below the polling interval, and peak memory
tracking at the cgroup level is otherwise perfect for this use-case.
As this data is used to ensure that binpacked work ends up with sufficient
headroom, this use-case mostly avoids the inaccuracies surrounding
reclaimable memory.
Link: https://lkml.kernel.org/r/20240730231304.761942-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-2-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As part of the dynamic kernel stack project, we need to know the amount of
data that can be saved by reducing the default kernel stack size [1].
Provide a kernel stack usage histogram to aid in optimizing kernel stack
sizes and minimizing memory waste in large-scale environments. The
histogram divides stack usage into power-of-two buckets and reports the
results in /proc/vmstat. This information is especially valuable in
environments with millions of machines, where even small optimizations can
have a significant impact.
The histogram data is presented in /proc/vmstat with entries like
"kstack_1k", "kstack_2k", and so on, indicating the number of threads that
exited with stack usage falling within each respective bucket.
Example outputs:
Intel:
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
ARM with 64K page_size:
$ grep kstack /proc/vmstat
kstack_1k 1
kstack_2k 340
kstack_4k 25212
kstack_8k 1659
kstack_16k 0
kstack_32k 0
kstack_64k 0
Note: once the dynamic kernel stack is implemented it will depend on the
implementation the usability of this feature: On hardware that supports
faults on kernel stacks, we will have other metrics that show the total
number of pages allocated for stacks. On hardware where faults are not
supported, we will most likely have some optimization where only some
threads are extended, and for those, these metrics will still be very
useful.
[1] https://lwn.net/Articles/974367
Link: https://lkml.kernel.org/r/20240730150158.832783-3-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20240724203322.2765486-3-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Li Zhijian <lizhijian@fujitsu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull x86 fixes from Thomas Gleixner:
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both
conditions need to be true. Otherwise the enablement of LBR in the
IA32_XSS MSR fails and subsequently the machine crashes on the next
XRSTORS operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related
functions use this cached information and the LBR CPU feature bit to
cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end
to randomize the starting points of the direct map, vmalloc and
vmemmap regions. It thereby limits the size of the direct map by
using the installed memory size plus an extra configurable margin for
hot-plug memory. This limitation is done to gain more randomization
space because otherwise only the holes between the direct map,
vmalloc, vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel,
so the memory hot-plug and resource management related code paths
still operate under the assumption that the available address space
can be determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of
the direct map and if unlucky this address is in the vmalloc space,
which causes high_memory to become greater than VMALLOC_START and
consequently causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and
use that for the memory hot-plug and resource management related
places instead of relying on MAX_PHYSMEM_BITS. In the KASLR case
PHYSMEM_END maps to a variable which is initialized by the KASLR
initialization and otherwise it is based on MAX_PHYSMEM_BITS as
before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is
only required as output value, so it does not have to exposed to the
VMM in the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the
index by the number of SNC nodes per L3 cache.
* tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix arch_mbm_* array overrun on SNC
x86/tdx: Fix data leak in mmio_read()
x86/kaslr: Expose and use the end of the physical memory address space
x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported
x86/apic: Make x2apic_disable() work correctly
Pull locking fix from Thomas Gleixner:
"A single fix for rt_mutex.
The deadlock detection code drops into an infinite scheduling loop
while still holding rt_mutex::wait_lock, which rightfully triggers a
'scheduling in atomic' warning.
Unlock it before that"
* tag 'locking-urgent-2024-08-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtmutex: Drop rt_mutex::wait_lock before scheduling
This reverts the following commits:
- 236dec0510 ("kconfig: tinyconfig: provide whole choice blocks to
avoid warnings")
- b0f269728c ("x86/config: Fix warning for 'make ARCH=x86_64
tinyconfig'")
Since commit f79dc03fe6 ("kconfig: refactor choice value calculation"),
it is no longer necessary to disable the remaining options in choice
blocks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Since 3cf78c5d01 ("sched_ext: Unpin and repin rq lock from
balance_scx()"), sched_ext's balance path terminates rq_pin in the outermost
function. This is simpler and in line with what other balance functions are
doing but it loses control over rq->clock_update_flags which makes
assert_clock_udpated() trigger if other CPUs pins the rq lock.
The only place this matters is touch_core_sched() which uses the timestamp
to order tasks from sibling rq's. Switch to sched_clock_cpu(). Later, it may
be better to use per-core dispatch sequence number.
v2: Use sched_clock_cpu() instead of ktime_get_ns() per David.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3cf78c5d01 ("sched_ext: Unpin and repin rq lock from balance_scx()")
Acked-by: David Vernet <void@manifault.com>
Cc: Peter Zijlstra <peterz@infradead.org>
When deciding whether a task can be migrated to a CPU,
dispatch_to_local_dsq() was open-coding p->cpus_allowed and scx_rq_online()
tests instead of using task_can_run_on_remote_rq(). This had two problems.
- It was missing is_migration_disabled() check and thus could try to migrate
a task which shouldn't leading to assertion and scheduling failures.
- It was testing p->cpus_ptr directly instead of using task_allowed_on_cpu()
and thus failed to consider ISA compatibility.
Update dispatch_to_local_dsq() to use task_can_run_on_remote_rq():
- Move scx_ops_error() triggering into task_can_run_on_remote_rq().
- When migration isn't allowed, fall back to the global DSQ instead of the
source DSQ by returning DTL_INVALID. This is both simpler and an overall
better behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
This patch introduces CONFIG_CPUSETS_V1 and guard cpuset-v1 code under
CONFIG_CPUSETS_V1. The default value of CONFIG_CPUSETS_V1 is N, so that
user who adopted v2 don't have 'pay' for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some functions name declared in cpuset-internel.h are generic. To avoid
confilicting with other variables for the same name, rename these
functions with cpuset_/cpuset1_ prefix to make them unique to cpuset.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move legacy cpuset controller interfaces files and corresponding code
into cpuset-v1.c. 'update_flag', 'cpuset_write_resmask' and
'cpuset_common_seq_show' are also used for v1, so declare them in
cpuset-internal.h.
'cpuset_write_s64', 'cpuset_read_s64' and 'fmeter_getrate' are only used
cpuset-v1.c now, make it static.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The validate_change_legacy functions is used for v1, move it to
cpuset-v1.c. And two micro 'cpuset_for_each_child' and
'cpuset_for_each_descendant_pre' are common for v1 and v2, move them to
cpuset-internal.h.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are some differents about hotplug update between cpuset v1 and
cpuset v2. Move the legacy code to cpuset-v1.c.
'update_tasks_cpumask' and 'update_tasks_nodemask' are both used in cpuset
v1 and cpuset v2, declare them in cpuset-internal.h.
The change from original code is that use callback_lock helpers to get
callback_lock lock/unlock.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To modify cpuset, both cpuset_mutex and callback_lock are needed. Add
helpers for cpuset-v1 to get callback_lock.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
'memory_spread' is only set in cpuset v1. move corresponding code into
cpuset-v1.c.
Currently, 'cpuset_update_task_spread_flags' and 'update_tasks_flags' are
exposed to cpuset.c.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Setting domain level is not supported at cpuset v2, so move corresponding
code into cpuset-v1.c.
The 'cpuset_write_s64' and 'cpuset_read_s64' are only used for setting
domain level, move them to cpuset-v1.c. Currently, expose to cpuset.c.
After cpuset legacy interface files are move to cpuset-v1.c, they can
be static. The 'rebuild_sched_domains_locked' is exposed to cpuset-v1.c.
The change from original code is that using 'cpuset_lock' and
'cpuset_unlock' functions to lock or unlock cpuset_mutex.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Collection of memory_pressure can be enabled by writing 1 to the cpuset
file 'memory_pressure_enabled', which is only for cpuset-v1. Therefore,
move the corresponding code to cpuset-v1.c.
Currently, the 'fmeter_init' and 'fmeter_getrate' functions are called
at cpuset.c, so expose them to cpuset.c.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move some declarations that will be used for cpuset v1 and v2,
including 'cpuset struct', 'cpuset_flagbits_t', cpuset_filetype_t,etc.
No logical change.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch introduces the cgroup/cpuset-v1.c source file which will be
used for all legacy (cgroup v1) cpuset cgroup code. It also introduces
cgroup/cpuset-internal.h to keep declarations shared between
cgroup/cpuset.c and cpuset/cpuset-v1.c.
As of now, let's compile it if CONFIG_CPUSET is set. Later on it can be
switched to use a separate config option, so that the legacy code won't be
compiled if not required.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the "isolcpus" boot command line parameter, we are able to
create isolated CPUs at boot time. These isolated CPUs aren't fully
accounted for in the cpuset code. For instance, the root cgroup's
"cpuset.cpus.isolated" control file does not include the boot time
isolated CPUs. Fix that by looking for pre-isolated CPUs at init time.
The prstate_housekeeping_conflict() function does check the
HK_TYPE_DOMAIN housekeeping cpumask to make sure that CPUs outside of it
can only be used in isolated partition. Given the fact that we are going
to make housekeeping cpumasks dynamic, the current check may not be right
anymore. Save the boot time HK_TYPE_DOMAIN cpumask and check against
it instead of the upcoming dynamic HK_TYPE_DOMAIN housekeeping cpumask.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
