When this flow is invoked with the "drop" parameter as true,
we only drop the frames from the hw queues, but not from the
sw queues.
So when we call wake_queues() after hw queue purging, all the
frames from the sw queues will be TX'ed,
when what we actually want to do is to purge all queues
in order to not TX anything...
This can cause, for example, TXing data frames to the peer
after the deauth frame was sent.
Fix this by purging the sw queues in addition to the hw queues
if the drop parameter is true.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230928172905.8fc2ee23e56f.I8b3f6def9c28ea96261e2d31df8786986fb5385b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We really cannot even get into this as we can't have
a BSS with a 5/10 MHz (scan) width, and therefore all
the code handling shifted rates cannot happen. Remove
it all, since it's broken anyway, at least with MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we're now protecting everything with the wiphy mutex
(and were really using it for almost everything before),
there's no longer any real reason to have a separate wdev
mutex. It may feel better, but really has no value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the iflist_mtx, so we don't need this mutex any
more in mac80211. However, drivers may also iterate,
and in some cases (e.g. mt76) do so from high-priority
contexts. Thus, keep the mutex around but remove its
usage in mac80211 apart from those driver-visible parts
that are still needed.
Most of this change was done automatically with spatch,
with the parts that are still needed as described above
reverted manually.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the local->mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the chanctx_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the key_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We now hold the wiphy mutex everywhere that we use or
needed the sta_mtx, so we don't need this mutex any
more. Remove it.
Most of this change was done automatically with spatch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This again is intended for future cleanups that are
possible when mac80211 and drivers can assume the
wiphy is locked.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the scan work to wiphy work, which also simplifies
the way we handle the work vs. the scan configuration.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the radar detect work to wiphy work in order
to lock the wiphy for it without doing it manually.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move the DFS CAC work over to hold the wiphy lock
there without worry about work cancellation.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Before converting more works to wiphy work, add
flushing in mac80211 where we also flush the
mac80211 workqueue. Not needed in suspend since
cfg80211 will have taken care of it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's quite a bit of code accessing sband iftype data
(HE, HE 6 GHz, EHT) and we always need to remember to use
the ieee80211_vif_type_p2p() helper. Add new helpers to
directly get it from the sband/vif rather than having to
call ieee80211_vif_type_p2p().
Convert most code with the following spatch:
@@
expression vif, sband;
@@
-ieee80211_get_he_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_eht_iftype_cap(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_eht_iftype_cap_vif(sband, vif)
@@
expression vif, sband;
@@
-ieee80211_get_he_6ghz_capa(sband, ieee80211_vif_type_p2p(vif))
+ieee80211_get_he_6ghz_capa_vif(sband, vif)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.db099f49e764.Ie892966c49e22c7b7ee1073bc684f142debfdc84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll need this later to convert other works that might
be cancelled from here, so convert this one first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a number of upcoming things in both the stack and
drivers that would otherwise conflict, so merge wireless to
wireless-next to be able to avoid those conflicts.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we have a reconfig failure in the driver, then we need
to shut down the network interface(s) at the network stack
level through cfg80211, which can result in a lot of those
"Failed check-sdata-in-driver check, ..." warnings, since
interfaces are considered to not be in the driver when the
reconfiguration fails, but we still need to go through all
the shutdown flow.
Avoid many of these warnings by storing the fact that the
stack experienced a reconfiguration failure and not doing
the warning in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230604120651.3750c4ae6e76.I9e80d6026f59263c008a1a68f6cd6891ca0b93b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.
Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.
Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-4-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are a few merge conflicts due to overlapping
fixes and changes, merge wireless/main to fix them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add minimal support for RX EHT rate reporting, not yet
adding (modifying) any radiotap headers, just statistics
for cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.
96f134dc19 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad899 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes: c850e31f79 ("wifi: mac80211: add internal handler for wake_tx_queue")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
====================
pull-request: wireless-next-2022-10-28
First set of patches v6.2. mac80211 refactoring continues for Wi-Fi 7.
All mac80211 driver are now converted to use internal TX queues, this
might cause some regressions so we wanted to do this early in the
cycle.
Note: wireless tree was merged[1] to wireless-next to avoid some
conflicts with mac80211 patches between the trees. Unfortunately there
are still two smaller conflicts in net/mac80211/util.c which Stephen
also reported[2]. In the first conflict initialise scratch_len to
"params->scratch_len ?: 3 * params->len" (note number 3, not 2!) and
in the second conflict take the version which uses elems->scratch_pos.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git/commit/?id=dfd2d876b3fda1790bc0239ba4c6967e25d16e91
[2] https://lore.kernel.org/all/20221020032340.5cf101c0@canb.auug.org.au/
mac80211
- preparation for Wi-Fi 7 Multi-Link Operation (MLO) continues
- add API to show the link STAs in debugfs
- all mac80211 drivers are now using mac80211 internal TX queues (iTXQs)
rtw89
- support 8852BE
rtl8xxxu
- support RTL8188FU
brmfmac
- support two station interfaces concurrently
bcma
- support SPROM rev 11
====================
Link: https://lore.kernel.org/r/20221028132943.304ECC433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers are now using mac80211 internal queues (iTXQs).
Drop mac80211 internal support for the old push path.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
