Given the difficulty of auditing all of userspace to figure out whether
every memfd_create() user has switched to passing MFD_EXEC and
MFD_NOEXEC_SEAL flags, it seems far less distruptive to make it possible
for older programs that don't make use of executable memfds to run under
vm.memfd_noexec=2. Otherwise, a small dependency change can result in
spurious errors. For programs that don't use executable memfds, passing
MFD_NOEXEC_SEAL is functionally a no-op and thus having the same
In addition, every failure under vm.memfd_noexec=2 needs to print to the
kernel log so that userspace can figure out where the error came from.
The concerns about pr_warn_ratelimited() spam that caused the switch to
pr_warn_once()[1,2] do not apply to the vm.memfd_noexec=2 case.
This is a user-visible API change, but as it allows programs to do
something that would be blocked before, and the sysctl itself was broken
and recently released, it seems unlikely this will cause any issues.
[1]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[2]: https://lore.kernel.org/202212161233.85C9783FB@keescook/
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-2-7ff9e3e10ba6@cyphar.com
Fixes: 105ff5339f ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memfd: cleanups for vm.memfd_noexec", v2.
The most critical issue with vm.memfd_noexec=2 (the fact that passing
MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's
tree[2], but there are still some outstanding issues that need to be
addressed:
* vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls
because it will make it far to difficult to ever migrate. Instead it
should imply MFD_EXEC.
* The dmesg warnings are pr_warn_once(), which on most systems means
that they will be used up by systemd or some other boot process and
userspace developers will never see it.
- For the !(flags & (MFD_EXEC | MFD_NOEXEC_SEAL)) case, outputting a
rate-limited message to the kernel log is necessary to tell
userspace that they should add the new flags.
Arguably the most ideal way to deal with the spam concern[3,4]
while still prompting userspace to switch to the new flags would be
to only log the warning once per task or something similar.
However, adding something to task_struct for tracking this would be
needless bloat for a single pr_warn_ratelimited().
So just switch to pr_info_ratelimited() to avoid spamming the log
with something that isn't a real warning. There's lots of
info-level stuff in dmesg, it seems really unlikely that this
should be an actual problem. Most programs are already switching to
the new flags anyway.
- For the vm.memfd_noexec=2 case, we need to log a warning for every
failure because otherwise userspace will have no idea why their
previously working program started returning -EACCES (previously
-EINVAL) from memfd_create(2). pr_warn_once() is simply wrong here.
* The racheting mechanism for vm.memfd_noexec makes it incredibly
unappealing for most users to enable the sysctl because enabling it
on &init_pid_ns means you need a system reboot to unset it. Given the
actual security threat being protected against, CAP_SYS_ADMIN users
being restricted in this way makes little sense.
The argument for this ratcheting by the original author was that it
allows you to have a hierarchical setting that cannot be unset by
child pidnses, but this is not accurate -- changing the parent
pidns's vm.memfd_noexec setting to be more restrictive didn't affect
children.
Instead, switch the vm.memfd_noexec sysctl to be properly
hierarchical and allow CAP_SYS_ADMIN users (in the pidns's owning
userns) to lower the setting as long as it is not lower than the
parent's effective setting. This change also makes it so that
changing a parent pidns's vm.memfd_noexec will affect all
descendants, providing a properly hierarchical setting. The
performance impact of this is incredibly minimal since the maximum
depth of pidns is 32 and it is only checked during memfd_create(2)
and unshare(CLONE_NEWPID).
* The memfd selftests would not exit with a non-zero error code when
certain tests that ran in a forked process (specifically the ones
related to MFD_EXEC and MFD_NOEXEC_SEAL) failed.
[1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/
[2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/
[3]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[4]: https://lore.kernel.org/f185bb42-b29c-977e-312e-3349eea15383@linuxfoundation.org/
This patch (of 5):
Before this change, a test runner using this self test would see a return
code of 0 when the tests using a child process (namely the MFD_NOEXEC_SEAL
and MFD_EXEC tests) failed, masking test failures.
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-0-7ff9e3e10ba6@cyphar.com
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-1-7ff9e3e10ba6@cyphar.com
Fixes: 11f75a0144 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add KSM_MERGE_TIME and KSM_MERGE_TIME_HUGE_PAGES tests with
size of 100.
./run_vmtests.sh -t ksm
-----------------------------
running ./ksm_tests -H -s 100
-----------------------------
Number of normal pages: 0
Number of huge pages: 50
Total size: 100 MiB
Total time: 0.399844662 s
Average speed: 250.097 MiB/s
[PASS]
-----------------------------
running ./ksm_tests -P -s 100
-----------------------------
Total size: 100 MiB
Total time: 0.451931496 s
Average speed: 221.272 MiB/s
[PASS]
Link: https://lkml.kernel.org/r/20230728164102.4655-1-ayush.jain3@amd.com
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 2c2241081f ("mm/gup: move private gup FOLL_ flags to
internal.h") FOLL_LONGTERM flag value got updated from 0x10000 to 0x100 at
include/linux/mm_types.h.
As hmm.hmm_device_private.hmm_gup_test uses FOLL_LONGTERM Updating same
here as well.
Before this change test goes in an infinite assert loop in
hmm.hmm_device_private.hmm_gup_test
==========================================================
RUN hmm.hmm_device_private.hmm_gup_test ...
hmm-tests.c:1962:hmm_gup_test:Expected HMM_DMIRROR_PROT_WRITE..
..(2) == m[2] (34)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
...
==========================================================
Call Trace:
<TASK>
? sched_clock+0xd/0x20
? __lock_acquire.constprop.0+0x120/0x6c0
? ktime_get+0x2c/0xd0
? sched_clock+0xd/0x20
? local_clock+0x12/0xd0
? lock_release+0x26e/0x3b0
pin_user_pages_fast+0x4c/0x70
gup_test_ioctl+0x4ff/0xbb0
? gup_test_ioctl+0x68c/0xbb0
__x64_sys_ioctl+0x99/0xd0
do_syscall_64+0x60/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x96/0x200
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f6aaa31aaff
After this change test is able to pass successfully.
Link: https://lkml.kernel.org/r/20230808124347.79163-1-ayush.jain3@amd.com
Fixes: 2c2241081f ("mm/gup: move private gup FOLL_ flags to internal.h")
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a test case for IPv6 source address delete.
As David suggested, add tests:
- Single device using src address
- Two devices with the same source address
- VRF with single device using src address
- VRF with two devices using src address
As Ido points out, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device. This will give us similar results
to IPv4 if the route is installed in the same VRF as the nexthop device, but
not when the nexthop device is enslaved to a different VRF. So add tests:
- src address and nexthop dev in same VR
- src address and nexthop device in different VRF
The link local address delete logic is different from the global address.
It should only affect the associate device it bonds to. So add tests cases
for link local address testing.
Here is the test result:
IPv6 delete address route tests
Single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
Two devices with the same source address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
VRF with single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
VRF with two devices using src address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
src address and nexthop dev in same VRF
TEST: Prefsrc removed from VRF when source address deleted [ OK ]
TEST: Prefsrc in default VRF not removed [ OK ]
TEST: Prefsrc not removed from VRF when source address exist [ OK ]
TEST: Prefsrc in default VRF removed [ OK ]
src address and nexthop device in different VRF
TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc not removed in default VRF [ OK ]
TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc removed in default VRF [ OK ]
Table ID 0
TEST: Prefsrc removed from default VRF when source address deleted [ OK ]
Link local source route
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed when delete ll addr [ OK ]
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed even ll addr still exist on other dev [ OK ]
Tests passed: 19
Tests failed: 0
Suggested-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the initial commit 1a01727676 ("selftests: Add VRF route leaking
tests") said, the IPv6 MTU test fails as source address selection
picking ::1. Every time we run the selftest this one report failed.
There seems not much meaning to keep reporting a failure for 3 years
that no one plan to fix/update. Let't just skip this one first. We can
add it back when the issue fixed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building the kernel and selftest with clang compiler (llvm17 or llvm18),
I hit the following compilation failure:
In file included from progs/test_lwt_redirect.c:3:
In file included from /usr/include/linux/ip.h:21:
In file included from /usr/include/asm/byteorder.h:5:
In file included from /usr/include/linux/byteorder/little_endian.h:13:
/usr/include/linux/swab.h:136:8: error: unknown type name '__always_inline'
136 | static __always_inline unsigned long __swab(const unsigned long y)
| ^
/usr/include/linux/swab.h:171:8: error: unknown type name '__always_inline'
171 | static __always_inline __u16 __swab16p(const __u16 *p)
...
bpf_helpers.h file provided a definition for __always_inline.
Putting 'ip.h' after 'bpf_helpers.h' fixed the issue.
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230818174312.1883381-1-yonghong.song@linux.dev
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It is very unclear to me how one is supposed to run all the mm selftests
consistently and get clear results.
Most of the test programs are launched by both run_vmtests.sh and
run_kselftest.sh:
hugepage-mmap
hugepage-shm
map_hugetlb
hugepage-mremap
hugepage-vmemmap
hugetlb-madvise
map_fixed_noreplace
gup_test
gup_longterm
uffd-unit-tests
uffd-stress
compaction_test
on-fault-limit
map_populate
mlock-random-test
mlock2-tests
mrelease_test
mremap_test
thuge-gen
virtual_address_range
va_high_addr_switch
mremap_dontunmap
hmm-tests
madv_populate
memfd_secret
ksm_tests
ksm_functional_tests
soft-dirty
cow
However, of this set, when launched by run_vmtests.sh, some of the
programs are invoked multiple times with different arguments. When
invoked by run_kselftest.sh, they are invoked without arguments (and as
a consequence, some fail immediately).
Some test programs are only launched by run_vmtests.sh:
test_vmalloc.sh
And some test programs and only launched by run_kselftest.sh:
khugepaged
migration
mkdirty
transhuge-stress
split_huge_page_test
mdwe_test
write_to_hugetlbfs
Furthermore, run_vmtests.sh is invoked by run_kselftest.sh, so in this
case all the test programs invoked by both scripts are run twice!
Needless to say, this is a bit of a mess. In the absence of fully
understanding the history here, it looks to me like the best solution is
to launch ALL test programs from run_vmtests.sh, and ONLY invoke
run_vmtests.sh from run_kselftest.sh. This way, we get full control over
the parameters, each program is only invoked the intended number of
times, and regardless of which script is used, the same tests get run in
the same way.
The only drawback is that if using run_kselftest.sh, it's top-level tap
result reporting reports only a single test and it fails if any of the
contained tests fail. I don't see this as a big deal though since we
still see all the nested reporting from multiple layers. The other issue
with this is that all of run_vmtests.sh must execute within a single
kselftest timeout period, so let's increase that to something more
suitable.
In the Makefile, TEST_GEN_PROGS will compile and install the tests and
will add them to the list of tests that run_kselftest.sh will run.
TEST_GEN_FILES will compile and install the tests but will not add them
to the test list. So let's move all the programs from TEST_GEN_PROGS to
TEST_GEN_FILES so that they are built but not executed by
run_kselftest.sh. Note that run_vmtests.sh is added to TEST_PROGS, which
means it ends up in the test list. (the lack of "_GEN" means it won't be
compiled, but simply copied).
Link: https://lkml.kernel.org/r/20230724082522.1202616-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Until now, transhuge-stress runs until its explicitly killed, so when
invoked by run_kselftest.sh, it would run until the test timeout, then it
would be killed and the test would be marked as failed.
Add a new, optional command line parameter that allows the user to specify
the duration in seconds that the program should run. The program exits
after this duration with a success (0) exit code. If the argument is
omitted the old behacvior remains.
On it's own, this doesn't quite solve our problem because run_kselftest.sh
does not allow passing parameters to the program under test. But we will
shortly move this to run_vmtests.sh, which does allow parameter passing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The `migration` test currently has a number of robustness problems that
cause it to hang and leak resources.
Timeout: There are 3 tests, which each previously ran for 60 seconds.
However, the timeout in mm/settings for a single test binary was set to 45
seconds. So when run using run_kselftest.sh, the top level timeout would
trigger before the test binary was finished. Solve this by meeting in the
middle; each of the 3 tests now runs for 20 seconds (for a total of 60),
and the top level timeout is set to 90 seconds.
Leaking child processes: the `shared_anon` test fork()s some children but
then an ASSERT() fires before the test kills those children. The assert
causes immediate exit of the parent and leaking of the children.
Furthermore, if run using the run_kselftest.sh wrapper, the wrapper would
get stuck waiting for those children to exit, which never happens. Solve
this by setting the "parent death signal" to SIGHUP in the child, so that
the child is killed automatically if the parent dies.
With these changes, the test binary now runs to completion on arm64, with
2 tests passing and the `shared_anon` test failing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
thuge-gen was previously only munmapping part of the mmapped buffer, which
caused us to run out of 1G huge pages for a later part of the test. Fix
this by munmapping the whole buffer. Based on the code, it looks like a
typo rather than an intention to keep some of the buffer mapped.
thuge-gen was also calling mmap with SHM_HUGETLB flag (bit 11 set), which
is actually MAP_DENYWRITE in mmap context. The man page says this flag is
ignored in modern kernels. I'm pretty sure from the context that the
author intended to pass the MAP_HUGETLB flag so I've fixed that up too.
Link: https://lkml.kernel.org/r/20230724082522.1202616-5-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arm64 does not support the soft-dirty PTE bit. However, the `soft-dirty`
test suite is currently run unconditionally and therefore generates
spurious test failures on arm64. There are also some tests in
`madv_populate` which assume it is supported.
For `soft-dirty` lets disable the whole suite for arm64; it is no longer
built and run_vmtests.sh will skip it if its not present.
For `madv_populate`, we need a runtime mechanism so that the remaining
tests continue to be run. Unfortunately, the only way to determine if the
soft-dirty dirty bit is supported is to write to a page, then see if the
bit is set in /proc/self/pagemap. But the tests that we want to
conditionally execute are testing precicesly this. So if we introduced
this feature check, we could accedentally turn a real failure (on a system
that claims to support soft-dirty) into a skip. So instead, do the check
based on architecture; for arm64, we report that soft-dirty is not
supported.
Link: https://lkml.kernel.org/r/20230724082522.1202616-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm fixes for arm64", v3.
Given my on-going work on large anon folios and contpte mappings, I
decided it would be a good idea to start running mm selftests to help
guard against regressions. However, it soon became clear that I
couldn't get the suite to run cleanly on arm64 with a vanilla v6.5-rc1
kernel (perhaps I'm just doing it wrong??), so got stuck in a rabbit
hole trying to debug and fix all the issues. Some were down to
misconfigurations, but I also found a number of issues with the tests
and even a couple of issues with the kernel.
This patch (of 8):
The selftests runner pipes the test program's stdout to tap_prefix. The
presence of the pipe means that the test program sets its stdout to be
fully buffered (as aposed to line buffered when directly connected to the
terminal). The block buffering means that there is often content in the
buffer at fork() time, which causes the output to end up duplicated. This
was causing problems for mm:cow where test results were duplicated 20-30x.
Solve this by using `stdbuf`, when available to force the test program to
use line buffered mode. This means previously printf'ed results are
flushed out of the program before any fork().
Additionally, explicitly set line buffer mode in ksft_print_header(),
which means that all test programs that use the ksft framework will
benefit even if stdbuf is not present on the system.
[ryan.roberts@arm.com: add setvbuf() to set buffering mode]
Link: https://lkml.kernel.org/r/20230726070655.2713530-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a function test_unmerge_zero_page() to test the functionality on
unsharing and counting ksm-placed zero pages and counting of this patch
series.
test_unmerge_zero_page() actually contains four subjct test objects:
(1) whether the count of ksm zero pages can update correctly after merging;
(2) whether the count of ksm zero pages can update correctly after
unmerging by madvise(...MADV_UNMERGEABLE);
(3) whether the count of ksm zero pages can update correctly after
unmerging by triggering write fault.
(4) whether ksm zero pages are really unmerged.
Link: https://lkml.kernel.org/r/20230613030947.186089-1-yang.yang29@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds selftests that exercise kfunc flavor relocation
functionality added in the previous patch. The actual kfunc defined
in kernel/bpf/helpers.c is:
struct task_struct *bpf_task_acquire(struct task_struct *p)
The following relocation behaviors are checked:
struct task_struct *bpf_task_acquire___one(struct task_struct *name)
* Should succeed despite differing param name
struct task_struct *bpf_task_acquire___two(struct task_struct *p, void *ctx)
* Should fail because there is no two-param bpf_task_acquire
struct task_struct *bpf_task_acquire___three(void *ctx)
* Should fail because, despite vmlinux's bpf_task_acquire having one param,
the types don't match
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230817225353.2570845-2-davemarchevsky@fb.com
The hwcaps selftest currently relies on the assembler being able to
assemble the crc32w instruction but this is not in the base v8.0 so is not
accepted by the standard GCC configurations used by many distributions.
Switch to manually encoding to fix the build.
Fixes: 09d2e95a04 ("kselftest/arm64: add crc32 feature to hwcap test")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230816-arm64-fix-crc32-build-v1-1-40165c1290f2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
Add test cases to verify the handling of unsupported input values for the
PMU event filter. The tests cover unsupported "action" values, unsupported
"flags" values, and unsupported "nevents" values. All these cases should
return an error, as they are currently not supported by the filter.
Furthermore, the tests also cover the case where setting non-existent
fixed counters in the fixed bitmap does not fail.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-5-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
