According to the datasheet(Table 3-2: Port configuration) the serdes 2
(SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII
mode is supported in the serdes_muxes list but was missing the SGMII mode.
In this mode the serdes is connected to the port 4.
Therefore add this entry in the list.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Pull phy updates from Vinod Koul:
"This contains bunch of new device support and one new Sunplus driver
along with updates which include another big round of qmp phy
conversion.
New support:
- Qualcomm SC8280XP eDP & DP and USB3 UNI phy (Bjorn Andersson)
- Rockchip rk3568 inno dsidphy (Chris Morgan)
- ocelot-serdes phy yaml binding (Colin Foster)
- Renesas gen2-usb phy yaml binding (Geert Uytterhoeven)
- RGMII suport in lan966x driver (Horatiu Vultur)
- Qualcomm SM6375 usb snps-femto-v2 bindings (Konrad Dybcio)
- Rockchip rk356x csi-dphya (Michael Riesch)
- Qualcomm sdm670 usb2 bindings (Richard Acayan)
- Sunplus USB2 PHY (Vincent Shih)
Updates:
- Mediatek hdmi, ufs, tphy and xsphy updates to use bitfield helpers
(Chunfeng Yun)
- Continued Qualcomm qmp phy driver split and cleanup. More patches
are under review and expected that next cycle might see completion
of this activity (Dmitry Baryshkov & Johan Hovold)
- TI wiz driver support for j7200 10g (Roger Quadros)
- Qualcomm femto phy driver support for override params to help with
tuning (Sandeep Maheswaram)
- SGMII support in TI wiz driver (Siddharth Vadapalli)
- dev_err_probe simplification (Yuan Can)"
* tag 'phy-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (170 commits)
phy: phy-mtk-dp: make array driving_params static const
dt-bindings: phy: qcom,qusb2: document sdm670 compatible
phy: qcom-qmp-pcie: fix resource mapping for SDM845 QHP PHY
phy: rockchip-snps-pcie3: only look for rockchip,pipe-grf on rk3588
phy: tegra: xusb: Enable usb role switch attribute
phy: mediatek: fix build warning of FIELD_PREP()
phy: qcom-qmp-usb: Use dev_err_probe() to simplify code
phy: qcom-qmp-ufs: Use dev_err_probe() to simplify code
phy: qcom-qmp-pcie-msm8996: Use dev_err_probe() to simplify code
phy: qcom-qmp-combo: Use dev_err_probe() to simplify code
phy: qualcomm: call clk_disable_unprepare in the error handling
phy: intel: Use dev_err_probe() to simplify code
phy: tegra: xusb: Use dev_err_probe() to simplify code
phy: qcom-snps: Use dev_err_probe() to simplify code
phy: qcom-qusb2: Use dev_err_probe() to simplify code
phy: qcom-qmp-pcie: Use dev_err_probe() to simplify code
phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe()
phy: mediatek: mipi: remove register access helpers
phy: mediatek: mipi: mt8183: use common helper to access registers
phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask
...
The serdes driver contains also a mux to decide which interface type to
use. Currently the driver supports GMII/SGMII/QSGMII and partially RGMII.
As it doesn't support all the other RGMII interfaces like
RGMII_TXID/RXID/ID and it could run only at 1G.
Therefore extend this for all the other speeds(10/100) and also allow
the other interfaces.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220901121455.245103-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Makes so that the serdes driver also takes QUSGMII in consideration.
It's configured exactly as QSGMII as far as the serdes driver is
concerned.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
