Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec_proto:
- Leverage Kunit and add Kunit test cases
- Clean-ups
- Fix typo
cros_ec_commands:
- Fix typo
- Fix compile errors
cros_kbd_led_backlight:
- Support OF match
- Support EC PWM backend
cros_ec:
- Always expose the last resume result to fix sleep hang detection on
ARM-based chromebooks
wilco_ec:
- Fix typo
cros_ec_typec:
- Clean-ups
- Use Type-C framework utilities to manage altmode structs"
* tag 'tag-chrome-platform-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (59 commits)
platform/chrome: cros_kunit_util: add default value for `msg->result`
platform/chrome: merge Kunit utils and test cases
platform/chrome: cros_kbd_led_backlight: fix build warning
platform/chrome: cros_ec_proto: add Kunit test for cros_ec_cmd()
platform/chrome: cros_ec_proto: add Kunit tests for get_sensor_count
platform/chrome: cros_ec_proto: add Kunit tests for check_features
platform/chrome: cros_ec_proto: add Kunit tests for get_host_event
platform/chrome: cros_ec_proto: add Kunit tests for get_next_event
platform/chrome: cros_ec_proto: add Kunit test for cros_ec_map_error()
platform/chrome: cros_ec_proto: add Kunit tests for cmd_xfer_status
platform/chrome: cros_ec_proto: return -EPROTO if empty payload
platform/chrome: cros_ec_proto: add Kunit test for empty payload
platform/chrome: cros_ec_proto: return -EAGAIN when retries timed out
platform/chrome: cros_ec_proto: change Kunit expectation when timed out
platform/chrome: cros_ec_proto: separate cros_ec_wait_until_complete()
platform/chrome: cros_ec_proto: separate cros_ec_xfer_command()
platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_send_command()
platform/chrome: cros_ec_proto: add Kunit tests for cros_ec_cmd_xfer()
platform/chrome: cros_ec_proto: add "cros_ec_" prefix to send_command()
platform/chrome: cros_ec_typec: Register port altmodes
...
Pull SPDX updates from Greg KH:
"Here is the set of SPDX comment updates for 6.0-rc1.
Nothing huge here, just a number of updated SPDX license tags and
cleanups based on the review of a number of common patterns in GPLv2
boilerplate text.
Also included in here are a few other minor updates, two USB files,
and one Documentation file update to get the SPDX lines correct.
All of these have been in the linux-next tree for a very long time"
* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
Documentation: samsung-s3c24xx: Add blank line after SPDX directive
x86/crypto: Remove stray comment terminator
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
...
Merge series from Douglas Anderson <dianders@chromium.org>:
The main goal of this series is to make a small dent in cleaning up
the way we deal with regulator loads. The idea is to add some extra
functionality to the regulator "bulk" API so that consumers can
specify the load using that.
Drivers tend to want to define the names of their regulators somewhere
in their source file as "static const". This means, inevitable, that
every driver out there open codes something like this:
static const char * const supply_names[] = {
"vcc", "vccl",
};
static int get_regulators(struct my_data *data)
{
int i;
data->supplies = devm_kzalloc(...)
if (!data->supplies)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(supply_names); i++)
data->supplies[i].supply = supply_names[i];
return devm_regulator_bulk_get(data->dev,
ARRAY_SIZE(supply_names),
data->supplies);
}
Let's make this more convenient by doing providing a helper that does
the copy.
I have chosen to have the "const" input structure here be the exact
same structure as the normal one passed to
devm_regulator_bulk_get(). This is slightly inefficent since the input
data can't possibly have anything useful for "ret" or consumer and
thus we waste 8 bytes per structure. This seems an OK tradeoff for not
introducing an extra structure.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726103631.v2.6.I38fc508a73135a5c1b873851f3553ff2a3a625f5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
There are a number of drivers that follow a pattern that looks like
this:
1. Use the regulator bulk API to get a bunch of regulators.
2. Set the load on each of the regulators to use whenever the
regulators are enabled.
Let's make this easier by just allowing the drivers to pass the load
in.
As part of this change we need to move the error printing in
regulator_bulk_get() around; let's switch to the new dev_err_probe()
to simplify it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220726103631.v2.4.Ie85f68215ada39f502a96dcb8a1f3ad977e3f68a@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulators marked with "regulator-always-on" or "regulator-boot-on"
as well as an "off-on-delay-us", may run into cycling issues that are
hard to detect.
This is caused by the "last_off" state not being initialized in this
case.
Fix the "last_off" initialization by setting it to the current kernel
time upon initialization, regardless of always_on/boot_on state.
Signed-off-by: Christian Kohlschütter <christian@kohlschutter.com>
Link: https://lore.kernel.org/r/FAFD5B39-E9C4-47C7-ACF1-2A04CD59758D@kohlschutter.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PMP8074 is a companion PMIC for the Qualcomm IPQ8074 WiSoC-s.
It features 5 HF-SMPS and 13 LDO regulators.
HF-SMPS regulators are Buck HFS430 regulators.
L1, L2 and L3 are HT_N1200_ST subtype LDO regulators.
L4 is HT_N300_ST subtype LDO regulator.
L5 and L6 are HT_P600 subtype LDO regulators.
L7, L11, L12 and L13 are HT_P150 subtype LDO regulators.
L10 is HT_P50 subtype LDO regulator.
This commit adds support for all of the buck regulators and LDO-s except
for L10 as I dont have documentation on its output voltage range.
S3 is the CPU cluster voltage supply, S4 supplies the UBI32 NPU cores
and L11 is the SDIO/eMMC I/O voltage regulator required for high speeds.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220704212402.1715182-7-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HT_P600 is a LDO PMOS regulator based on LV P600 using HFS430 layout
found in PMP8074 and PMS405 PMIC-s.
Both PMP8074 and PMS405 define the programmable range as 1.704 to 1.896V
but the actual MAX output voltage depends on the exact LDO in each of
the PMIC-s.
Their usual voltage that they are used is 1.8V.
It has a max current of 600mA, voltage step of 8mV.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220704212402.1715182-5-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout
found in PMP8074 and PMS405 PMIC-s.
Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V
but the actual MAX output voltage depends on the exact LDO in each of
the PMIC-s.
It has a max current of 150mA, voltage step of 8mV.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Link: https://lore.kernel.org/r/20220704212402.1715182-4-robimarko@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stephan Gerhold <stephan.gerhold@kernkonzept.com>:
Fix the voltage range for the pm8916_pldo in the qcom_smd-regulator
driver and add definitions for the regulators available in PM8909.
The set of regulators available in the PM8909 PMIC is similar to PM8916
which is already supported by the driver. s3, s4 and l16 are missing.
However, probing the SPMI hardware identification registers using the
qcom_spmi-regulator driver reveals that the regulators in PM8909 are
actually some kind of mixture between PM8916 and PM8226:
- ult_lo_smps (= pm8916_buck_lvo_smps): s1
- ult_ho_smps (= pm8916_buck_hvo_smps): s2
- ult_nldo (= pm8916_nldo): l1, l2, l3, l10
- ult_pldo (= pm8916_pldo): l4, l8, l9, l12-l15, l17, l18
- pldo (= pm8226_pldo): l5, l6, l7, l11
Use this mapping to add the rpm_regulator_data for PM8909 by reusing
the existing regulator definitions.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20220623094614.1410180-4-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8916 device specification [1] documents a programmable range of
1.75V to 3.337V with 12.5mV steps for the PMOS LDOs in PM8916. This
range is also used when controlling the regulator directly using the
qcom_spmi-regulator driver ("ult_pldo" there).
However, for some reason the qcom_smd-regulator driver allows a much
larger range for the same hardware component. This could be simply a
typo, since the start of the range is essentially just missing a '1'.
In practice this does not cause any major problems, since the driver
just sends the actual voltage to the RPM firmware instead of making use
of the incorrect voltage selector. Still, having the wrong range there
is confusing and prevents the regulator core from validating requests
correctly.
[1]: https://developer.qualcomm.com/download/sd410/pm8916pm8916-1-power-management-ic-device-specification.pdf
Fixes: 57d6567680 ("regulator: qcom-smd: Add PM8916 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Link: https://lore.kernel.org/r/20220623094614.1410180-2-stephan.gerhold@kernkonzept.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From the common binding, 'enable-gpio' or 'enable-gpios' are all well
for external 'enable' gpio.
'gpiod_get_from_of_node' only parse the 'enable' property, it need to
add the gpio suffix. It's more convenient to use fwnode_gpiod_get_index.
Although fwnode parsing is not preferred, but 'of_parse_cb' already can
guarantee the callback will only be used by regulator of_node parsing.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1656466861-7737-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220607185304.1128962-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether express or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license version 2 as
published by the free software foundation this program is distributed
as is without any warranty of any kind whether expressed or implied
without even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license version 2 for
more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
you should have received a copy of the gnu general public license
along with this program if not write to the free software foundation
inc 59 temple place suite 330 boston ma 02111-1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on the normalized pattern:
this program is free software you can redistribute it and/or modify it
under the terms of the gnu general public license as published by the
free software foundation version 2 this program is distributed as is
without any warranty of any kind whether express or implied without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference.
Reviewed-by: Allison Randal <allison@lohutok.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_register_sys_off_handler() that replaces global
pm_power_off_prepare variable and allows to register multiple
power-off handlers.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the introduction of regulator->enable_count, a driver that did
an exclusive get on an already-enabled regulator would end up with
enable_count initialized to 0 but rdev->use_count initialized to 1.
With that starting point the regulator is effectively stuck enabled,
because if the driver attempted to disable it it would fail the
enable_count underflow check in _regulator_handle_consumer_disable().
The EXCLUSIVE_GET path in _regulator_get() now initializes
enable_count along with rdev->use_count so that the regulator can be
disabled without underflowing the former.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 5451781dad ("regulator: core: Only count load for enabled consumers")
Link: https://lore.kernel.org/r/20220505043152.12933-1-zev@bewilderbeest.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The default configuration of the PMIC behavior makes the PMIC
power cycle most regulators on WDOG_B assertion. This power
cycling causes the memory contents of OCRAM to be lost.
Some systems neeeds some memory that survives reset and
reboot, therefore this patch is created.
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Link: https://lore.kernel.org/r/20220429072211.24957-4-rickaran@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
