Support data type annotation with new --data-type option. It internally
uses type sort key to collect sample histogram for the type and display
every members like below.
$ perf annotate --data-type
...
Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples):
============================================================================
samples offset size field
13 0 640 struct cfs_rq {
2 0 16 struct load_weight load {
2 0 8 unsigned long weight;
0 8 4 u32 inv_weight;
};
0 16 8 unsigned long runnable_weight;
0 24 4 unsigned int nr_running;
1 28 4 unsigned int h_nr_running;
...
For simplicity it prints the number of samples per field for now.
But it should be easy to show the overhead percentage instead.
The number at the outer struct is a sum of the numbers of the inner
members. For example, struct cfs_rq got total 13 samples, and 2 came
from the load (struct load_weight) and 1 from h_nr_running. Similarly,
the struct load_weight got total 2 samples and they all came from the
weight field.
I've added two new flags in the symbol_conf for this. The
annotate_data_member is to get the members of the type. This is also
needed for perf report with typeoff sort key. The annotate_data_sample
is to update sample stats for each offset and used only in annotate.
Currently it only support stdio output mode, TUI support can be added
later.
Committer testing:
With the perf.data from the previous csets, a very simple, short
duration one:
# perf annotate --data-type
Annotate type: 'struct list_head' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 16 struct list_head {
0 0 8 struct list_head* next;
1 8 8 struct list_head* prev;
};
Annotate type: 'char' in [kernel.kallsyms] (1 samples):
============================================================================
samples offset size field
1 0 1 char ;
#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: linux-toolchains@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Link: https://lore.kernel.org/r/20231213001323.718046-15-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20221205225940.3079667-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make the output more readable, I think it's better to remove 0's in
the output. Also the dummy event has no event stats so it just wasts
the space. Let's use the --skip-empty option to suppress it.
$ perf report --stat --skip-empty
Aggregated stats:
TOTAL events: 16530
MMAP events: 226
COMM events: 1596
EXIT events: 2
THROTTLE events: 121
UNTHROTTLE events: 117
FORK events: 1595
SAMPLE events: 719
MMAP2 events: 12147
CGROUP events: 2
FINISHED_ROUND events: 2
THREAD_MAP events: 1
CPU_MAP events: 1
TIME_CONV events: 1
cycles stats:
SAMPLE events: 719
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210427013717.1651674-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In hist__find_annotations(), since different 'struct hist_entry' entries
may point to same symbol, we free notes->src to signal already processed
this symbol in stdio mode; when annotate, entry will skipped if
notes->src is NULL to avoid repeated output.
However, there is a problem, for example, run the following command:
# perf record -e branch-misses -e branch-instructions -a sleep 1
perf.data file contains different types of sample event.
If the same IP sample event exists in branch-misses and branch-instructions,
this event uses the same symbol. When annotate branch-misses events, notes->src
corresponding to this event is set to null, as a result, when annotate
branch-instructions events, this event is skipped and no annotate is output.
Solution of this patch is to remove zfree in hists__find_annotations and
change sort order to "dso,symbol" to avoid duplicate output when different
processes correspond to the same symbol.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210319123527.173883-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The objdump utility has useful --prefix / --prefix-strip options to
allow changing source code file names hardcoded into executables' debug
info. Add options to 'perf report', 'perf top' and 'perf annotate',
which are then passed to objdump.
$ mkdir foo
$ echo 'main() { for (;;); }' > foo/foo.c
$ gcc -g foo/foo.c
foo/foo.c:1:1: warning: return type defaults to ‘int’ [-Wimplicit-int]
1 | main() { for (;;); }
| ^~~~
$ perf record ./a.out
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.230 MB perf.data (5721 samples) ]
$ mv foo bar
$ perf annotate
<does not show source code>
$ perf annotate --prefix=/home/ak/lsrc/git/bar --prefix-strip=5
<does show source code>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 20200107210444.214071-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we pass that substructure around and with it consolidate lots of
functions that receive a (map, symbol) pair and now can receive just a
'struct map_symbol' pointer.
This further paves the way to add 'struct map_groups' to 'struct
map_symbol' so that we can have all we need for annotation so that we
can ditch 'struct map'->groups, i.e. have the map_groups pointer in a
more central place, avoiding the pointer in the 'struct map' that have
tons of instances.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hist__account_cycles() function is executed when the
hist_iter__branch_callback() is called.
But it looks it's not necessary. In hist__account_cycles, it already
walks on all branch entries.
This patch moves the hist__account_cycles out of callback, now the data
processing is much faster than before.
Previous code has an issue that the ch[offset].num++ (in
__symbol__account_cycles) is executed repeatedly since
hist__account_cycles is called in each hist_iter__branch_callback, so
the counting of ch[offset].num is not correct (too big).
With this patch, the issue is fixed. And we don't need the code of
"ch->reset >= ch->num / 2" to check if there are too many overlaps (in
annotation__count_and_fill), otherwise some data would be hidden.
Now, we can try, for example:
perf record -b ...
perf annotate or perf report -s symbol
The before/after output should be no change.
v3:
---
Fix the crash in stdio mode.
Like previous code, it needs the checking of ui__has_annotation()
before hist__account_cycles()
v2:
---
1. Cover the similar perf report
2. Remove the checking code "ch->reset >= ch->num / 2"
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1552684577-29041-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
