commit 73a7a271b3 upstream.
Some older compilers have no implementation for the helper for 64-bit
unsigned division/modulo, so linking pcie-brcmstb driver causes the
"undefined reference to `__aeabi_uldivmod'" error.
*rc_bar2_size is always a power of two, because it is calculated as:
"1ULL << fls64(entry->res->end - entry->res->start)", so the modulo
operation in the subsequent check can be replaced by a simple logical
AND with a proper mask.
Link: https://lore.kernel.org/r/20200227115146.24515-1-m.szyprowski@samsung.com
Fixes: c045213703 ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
commit 40ca1bf580 upstream.
This adds MSI support to the Broadcom STB PCIe host controller. The MSI
controller is physically located within the PCIe block, however, there
is no reason why the MSI controller could not be moved elsewhere in the
future. MSIX is not supported by the HW.
Since the internal Brcmstb MSI controller is intertwined with the PCIe
controller, it is not its own platform device but rather part of the
PCIe platform device.
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
The Pi 4 SoC is called BCM2711, not BCM2838.
Fixes: "bcm2835-dma: Add proper 40-bit DMA support"
Fixes: "Ported pcie-brcmstb bounce buffer implementation to ARM64."
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Add a new compatible string to identify BCM2711B0, as later revisions
don't require the bounce buffer support.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
The driver attempts to set the dma_ops for the root complex, but doing
so causes an error message and only the end points need it. Fix the
error by making the code specific to the end point case.
Also copy some cosmetic tidy-ups from 5.5.y.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
The DMA framework performs the necessary address conversions for the
common cases based on the dma-ranges DT property. brcm_to_pci and
brcm_to_cpu were probably designed for non-DT use cases, something
which isn't an issue for 2711. This second level of mapping causes
breakage with a non-identity PCIe<->system address mapping, so remove
it completely.
The non-identity mapping also broke the DMA40 support, so add back a
simple translation from PCIe to sys addresses.
arm64 builds also require a wider coherent_dma_mask, otherwise the
bounce buffer allocation is rejected.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Ported pcie-brcmstb bounce buffer implementation to ARM64.
This enables full 4G RAM usage on Raspberry Pi in 64-bit mode.
Signed-off-by: Yaroslav Rosomakho <yaroslavros@gmail.com>
A change to arm_get_dma_map_ops has stopped get_dma_ops from working
on the root complex, causing an error to be logged. However, there is
no need to override the DMA ops in that case, so skip it and
eliminate the error message.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
The 40-bit additions are not fully tested, but it should be
capable of supporting both 40-bit memcpy on BCM2711 and regular
Lite channels on BCM2835.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
The initial brcmstb PCIe driver - originally taken from the V3(?)
patch set - has been modified significantly for the BCM2711.
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
This commit adds MSI to the Broadcom STB PCIe host controller. It does
not add MSIX since that functionality is not in the HW. The MSI
controller is physically located within the PCIe block, however, there
is no reason why the MSI controller could not be moved elsewhere in
the future.
Since the internal Brcmstb MSI controller is intertwined with the PCIe
controller, it is not its own platform device but rather part of the
PCIe platform device.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
The Broadcom STB PCIe host controller is intimately related to the
memory subsystem. This close relationship adds complexity to how cpu
system memory is mapped to PCIe memory. Ideally, this mapping is an
identity mapping, or an identity mapping off by a constant. Not so in
this case.
Consider the Broadcom reference board BCM97445LCC_4X8 which has 6 GB
of system memory. Here is how the PCIe controller maps the
system memory to PCIe memory:
memc0-a@[ 0....3fffffff] <=> pci@[ 0....3fffffff]
memc0-b@[100000000...13fffffff] <=> pci@[ 40000000....7fffffff]
memc1-a@[ 40000000....7fffffff] <=> pci@[ 80000000....bfffffff]
memc1-b@[300000000...33fffffff] <=> pci@[ c0000000....ffffffff]
memc2-a@[ 80000000....bfffffff] <=> pci@[100000000...13fffffff]
memc2-b@[c00000000...c3fffffff] <=> pci@[140000000...17fffffff]
Although there are some "gaps" that can be added between the
individual mappings by software, the permutation of memory regions for
the most part is fixed by HW. The solution of having something close
to an identity mapping is not possible.
The idea behind this HW design is that the same PCIe module can
act as an RC or EP, and if it acts as an EP it concatenates all
of system memory into a BAR so anything can be accessed. Unfortunately,
when the PCIe block is in the role of an RC it also presents this
"BAR" to downstream PCIe devices, rather than offering an identity map
between its system memory and PCIe space.
Suppose that an endpoint driver allocs some DMA memory. Suppose this
memory is located at 0x6000_0000, which is in the middle of memc1-a.
The driver wants a dma_addr_t value that it can pass on to the EP to
use. Without doing any custom mapping, the EP will use this value for
DMA: the driver will get a dma_addr_t equal to 0x6000_0000. But this
won't work; the device needs a dma_addr_t that reflects the PCIe space
address, namely 0xa000_0000.
So, essentially the solution to this problem must modify the
dma_addr_t returned by the DMA routines routines. There are two
ways (I know of) of doing this:
(a) overriding/redefining the dma_to_phys() and phys_to_dma() calls
that are used by the dma_ops routines. This is the approach of
arch/mips/cavium-octeon/dma-octeon.c
In ARM and ARM64 these two routines are defiend in asm/dma-mapping.h
as static inline functions.
(b) Subscribe to a notifier that notifies when a device is added to a
bus. When this happens, set_dma_ops() can be called for the device.
This method is mentioned in:
http://lxr.free-electrons.com/source/drivers/of/platform.c?v=3.16#L152
where it says as a comment
"In case if platform code need to use own special DMA
configuration, it can use Platform bus notifier and
handle BUS_NOTIFY_ADD_DEVICE event to fix up DMA
configuration."
Solution (b) is what this commit does. It uses its own set of
dma_ops which are wrappers around the arch_dma_ops. The
wrappers translate the dma addresses before/after invoking
the arch_dma_ops, as appropriate.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
This commit adds the basic Broadcom STB PCIe controller. Missing is
the ability to process MSI and also handle dma-ranges for inbound
memory accesses. These two functionalities are added in subsequent
commits.
The PCIe block contains an MDIO interface. This is a local interface
only accessible by the PCIe controller. It cannot be used or shared
by any other HW. As such, the small amount of code for this
controller is included in this driver as there is little upside to put
it elsewhere.
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
[ Upstream commit 574f29036f ]
Previously quirk_paxc_bridge() was applied when the iproc driver was
built-in, but not when it was compiled as a module.
This happened because it was under #ifdef CONFIG_PCIE_IPROC_PLATFORM:
PCIE_IPROC_PLATFORM=y causes CONFIG_PCIE_IPROC_PLATFORM to be defined, but
PCIE_IPROC_PLATFORM=m causes CONFIG_PCIE_IPROC_PLATFORM_MODULE to be
defined.
Move quirk_paxc_bridge() to pcie-iproc.c and drop the #ifdef so the quirk
is always applied, whether iproc is built-in or a module.
[bhelgaas: commit log, move to pcie-iproc.c, not pcie-iproc-platform.c]
Link: https://lore.kernel.org/r/20191211174511.89713-1-wei.liu@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 21a92676e1 upstream.
Fix AFI_PEX2_CTRL reg offset for Tegra30 by moving it from the Tegra20
SoC struct where it erroneously got added. This fixes the AFI_PEX2_CTRL
reg offset being uninitialised subsequently failing to bring up the
third PCIe port.
Fixes: adb2653b3d ("PCI: tegra: Add AFI_PEX2_CTRL reg offset as part of SoC struct")
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6df19872d8 upstream.
ks_pcie_stop_link() function does not clear LTSSM_EN_VAL bit so
link training was not triggered more than once after startup.
In configurations where link can be unstable during early boot,
for example, under low temperature, it will never be established.
Fixes: 0c4ffcfe1f ("PCI: keystone: Add TI Keystone PCIe driver")
Signed-off-by: Yurii Monakov <monakov.y@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Andrew Murray <andrew.murray@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Consolidate DT "dma-ranges" parsing and convert all host drivers to use
shared parsing (Rob Herring)
* remotes/lorenzo/pci/mmio-dma-ranges:
PCI: Make devm_of_pci_get_host_bridge_resources() static
PCI: rcar: Use inbound resources for setup
PCI: iproc: Use inbound resources for setup
PCI: xgene: Use inbound resources for setup
PCI: v3-semi: Use inbound resources for setup
PCI: ftpci100: Use inbound resources for setup
PCI: of: Add inbound resource parsing to helpers
PCI: versatile: Enable COMPILE_TEST
PCI: versatile: Remove usage of PHYS_OFFSET
PCI: versatile: Use pci_parse_request_of_pci_ranges()
PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges()
PCI: xilinx: Use pci_parse_request_of_pci_ranges()
PCI: xgene: Use pci_parse_request_of_pci_ranges()
PCI: v3-semi: Use pci_parse_request_of_pci_ranges()
PCI: rockchip: Drop storing driver private outbound resource data
PCI: rockchip: Use pci_parse_request_of_pci_ranges()
PCI: mobiveil: Use pci_parse_request_of_pci_ranges()
PCI: mediatek: Use pci_parse_request_of_pci_ranges()
PCI: iproc: Use pci_parse_request_of_pci_ranges()
PCI: faraday: Use pci_parse_request_of_pci_ranges()
PCI: dwc: Use pci_parse_request_of_pci_ranges()
PCI: altera: Use pci_parse_request_of_pci_ranges()
PCI: aardvark: Use pci_parse_request_of_pci_ranges()
PCI: Export pci_parse_request_of_pci_ranges()
resource: Add a resource_list_first_type helper
# Conflicts:
# drivers/pci/controller/pcie-rcar.c
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
* remotes/lorenzo/pci/vmd:
MAINTAINERS: Remove Keith from VMD maintainer
PCI: vmd: Add device id for VMD device 8086:9A0B
PCI: vmd: Add bus 224-255 restriction decode
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy)
* remotes/lorenzo/pci/rockchip:
PCI: rockchip: Make some regulators non-optional
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro
Shimoda)
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda)
* remotes/lorenzo/pci/rcar:
PCI: rcar: Fix missing MACCTLR register setting in initialization sequence
PCI: rcar: Recalculate inbound range alignment for each controller entry
PCI: rcar: Move the inbound index check
PCI: rcar: Remove unnecessary header include (../pci.h)
