Add tests to ensure that only supported dynamic pointer types are accepted,
that the passed argument is actually a dynamic pointer, that the passed
argument is a pointer to the stack, and that bpf_verify_pkcs7_signature()
correctly handles dynamic pointers with data set to NULL.
The tests are currently in the deny list for s390x (JIT does not support
calling kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-14-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Perform several tests to ensure the correct implementation of the
bpf_verify_pkcs7_signature() kfunc.
Do the tests with data signed with a generated testing key (by using
sign-file from scripts/) and with the tcp_bic.ko kernel module if it is
found in the system. The test does not fail if tcp_bic.ko is not found.
First, perform an unsuccessful signature verification without data.
Second, perform a successful signature verification with the session
keyring and a new one created for testing.
Then, ensure that permission and validation checks are done properly on the
keyring provided to bpf_verify_pkcs7_signature(), despite those checks were
deferred at the time the keyring was retrieved with bpf_lookup_user_key().
The tests expect to encounter an error if the Search permission is removed
from the keyring, or the keyring is expired.
Finally, perform a successful and unsuccessful signature verification with
the keyrings with pre-determined IDs (the last test fails because the key
is not in the platform keyring).
The test is currently in the deny list for s390x (JIT does not support
calling kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20220920075951.929132-13-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test to ensure that bpf_lookup_user_key() creates a referenced
special keyring when the KEY_LOOKUP_CREATE flag is passed to this function.
Ensure that the kfunc rejects invalid flags.
Ensure that a keyring can be obtained from bpf_lookup_system_key() when one
of the pre-determined keyring IDs is provided.
The test is currently blacklisted for s390x (JIT does not support calling
kernel function).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20220920075951.929132-12-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add verifier tests for bpf_lookup_*_key() and bpf_key_put(), to ensure that
acquired key references stored in the bpf_key structure are released, that
a non-NULL bpf_key pointer is passed to bpf_key_put(), and that key
references are not leaked.
Also, slightly modify test_verifier.c, to find the BTF ID of the attach
point for the LSM program type (currently, it is done only for TRACING).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-11-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move dynptr type check to is_dynptr_type_expected() from
is_dynptr_reg_valid_init(), so that callers can better determine the cause
of a negative result (dynamic pointer not valid/initialized, dynamic
pointer of the wrong type). It will be useful for example for BTF, to
restrict which dynamic pointer types can be passed to kfuncs, as initially
only the local type will be supported.
Also, splitting makes the code more readable, since checking the dynamic
pointer type is not necessarily related to validity and initialization.
Split the validity/initialization and dynamic pointer type check also in
the verifier, and adjust the expected error message in the test (a test for
an unexpected dynptr type passed to a helper cannot be added due to missing
suitable helpers, but this case has been tested manually).
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220920075951.929132-4-roberto.sassu@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The attach flags is meaningless for effective query and
its value will always be set as 0 during effective query.
Root cg's effective progs is always its attached progs,
so we use non-effective query to get its progs count and
attach flags. And we don't need the remain attach flags
check.
Fixes: b79c9fc955 ("bpf: implement BPF_PROG_QUERY for BPF_LSM_CGROUP")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20220921104604.2340580-4-pulehui@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the ptrace test support for NT_ARM_TLS to cover TPIDR2_EL0 - on
systems that support SME the NT_ARM_TLS regset can be up to 2 elements
long with the second element containing TPIDR2_EL0. On systems
supporting SME we verify that this value can be read and written while
on systems that do not support SME we verify correct truncation of reads
and writes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220829154921.837871-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Test 0811: Add multiple basic filter with cmp ematch u8/link layer and
default action and dump them
Test 5129: List basic filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 8293: Add tcindex filter with default action
Test 7281: Add tcindex filter with hash size and pass action
Test b294: Add tcindex filter with mask shift and reclassify action
Test 0532: Add tcindex filter with pass_on and continue actions
Test d473: Add tcindex filter with pipe action
Test 2940: Add tcindex filter with miltiple actions
Test 1893: List tcindex filters
Test 2041: Change tcindex filter with pass action
Test 9203: Replace tcindex filter with pass action
Test 7957: Delete tcindex filter with drop action
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 2141: Add rsvp filter with tcp proto and specific IP address
Test 5267: Add rsvp filter with udp proto and specific IP address
Test 2819: Add rsvp filter with src ip and src port
Test c967: Add rsvp filter with tunnelid and continue action
Test 5463: Add rsvp filter with tunnel and pipe action
Test 2332: Add rsvp filter with miltiple actions
Test 8879: Add rsvp filter with tunnel and skp flag
Test 8261: List rsvp filters
Test 8989: Delete rsvp filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test e122: Add route filter with from and to tag
Test 6573: Add route filter with fromif and to tag
Test 1362: Add route filter with to flag and reclassify action
Test 4720: Add route filter with from flag and continue actions
Test 2812: Add route filter with form tag and pipe action
Test 7994: Add route filter with miltiple actions
Test 4312: List route filters
Test 2634: Delete route filter with pipe action
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 5294: Add flow filter with map key and ops
Test 3514: Add flow filter with map key or ops
Test 7534: Add flow filter with map key xor ops
Test 4524: Add flow filter with map key rshift ops
Test 0230: Add flow filter with map key addend ops
Test 2344: Add flow filter with src map key
Test 9304: Add flow filter with proto map key
Test 9038: Add flow filter with proto-src map key
Test 2a03: Add flow filter with proto-dst map key
Test a073: Add flow filter with iif map key
Test 3b20: Add flow filter with priority map key
Test 8945: Add flow filter with mark map key
Test c034: Add flow filter with nfct map key
Test 0205: Add flow filter with nfct-src map key
Test 5315: Add flow filter with nfct-src map key
Test 7849: Add flow filter with nfct-proto-src map key
Test 9902: Add flow filter with nfct-proto-dst map key
Test 6742: Add flow filter with rt-classid map key
Test 5432: Add flow filter with sk-uid map key
Test 4134: Add flow filter with sk-gid map key
Test 4522: Add flow filter with vlan-tag map key
Test 4253: Add flow filter with rxhash map key
Test 4452: Add flow filter with hash key list
Test 4341: Add flow filter with muliple ops
Test 4392: List flow filters
Test 4322: Change flow filter with map key num
Test 2320: Replace flow filter with map key num
Test 3213: Delete flow filter with map key num
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 6273: Add cgroup filter with cmp ematch u8/link layer and drop action
Test 4721: Add cgroup filter with cmp ematch u8/link layer with trans
flag and pass action
Test d392: Add cgroup filter with cmp ematch u16/link layer and pipe action
Test 0234: Add cgroup filter with cmp ematch u32/link layer and miltiple
actions
Test 8499: Add cgroup filter with cmp ematch u8/network layer and pass
action
Test b273: Add cgroup filter with cmp ematch u8/network layer with trans
flag and drop action
Test 1934: Add cgroup filter with cmp ematch u16/network layer and pipe
action
Test 2733: Add cgroup filter with cmp ematch u32/network layer and
miltiple actions
Test 3271: Add cgroup filter with NOT cmp ematch rule and pass action
Test 2362: Add cgroup filter with two ANDed cmp ematch rules and single
action
Test 9993: Add cgroup filter with two ORed cmp ematch rules and single
action
Test 2331: Add cgroup filter with two ANDed cmp ematch rules and one ORed
ematch rule and single action
Test 3645: Add cgroup filter with two ANDed cmp ematch rules and one NOT
ORed ematch rule and single action
Test b124: Add cgroup filter with u32 ematch u8/zero offset and drop
action
Test 7381: Add cgroup filter with u32 ematch u8/zero offset and invalid
value >0xFF
Test 2231: Add cgroup filter with u32 ematch u8/positive offset and drop
action
Test 1882: Add cgroup filter with u32 ematch u8/invalid mask >0xFF
Test 1237: Add cgroup filter with u32 ematch u8/missing offset
Test 3812: Add cgroup filter with u32 ematch u8/missing AT keyword
Test 1112: Add cgroup filter with u32 ematch u8/missing value
Test 3241: Add cgroup filter with u32 ematch u8/non-numeric value
Test e231: Add cgroup filter with u32 ematch u8/non-numeric mask
Test 4652: Add cgroup filter with u32 ematch u8/negative offset and pass
Test 1331: Add cgroup filter with u32 ematch u16/zero offset and pipe
action
Test e354: Add cgroup filter with u32 ematch u16/zero offset and invalid
value >0xFFFF
Test 3538: Add cgroup filter with u32 ematch u16/positive offset and drop
action
Test 4576: Add cgroup filter with u32 ematch u16/invalid mask >0xFFFF
Test b842: Add cgroup filter with u32 ematch u16/missing offset
Test c924: Add cgroup filter with u32 ematch u16/missing AT keyword
Test cc93: Add cgroup filter with u32 ematch u16/missing value
Test 123c: Add cgroup filter with u32 ematch u16/non-numeric value
Test 3675: Add cgroup filter with u32 ematch u16/non-numeric mask
Test 1123: Add cgroup filter with u32 ematch u16/negative offset and drop
action
Test 4234: Add cgroup filter with u32 ematch u16/nexthdr+ offset and pass
action
Test e912: Add cgroup filter with u32 ematch u32/zero offset and pipe
action
Test 1435: Add cgroup filter with u32 ematch u32/positive offset and drop
action
Test 1282: Add cgroup filter with u32 ematch u32/missing offset
Test 6456: Add cgroup filter with u32 ematch u32/missing AT keyword
Test 4231: Add cgroup filter with u32 ematch u32/missing value
Test 2131: Add cgroup filter with u32 ematch u32/non-numeric value
Test f125: Add cgroup filter with u32 ematch u32/non-numeric mask
Test 4316: Add cgroup filter with u32 ematch u32/negative offset and drop
action
Test 23ae: Add cgroup filter with u32 ematch u32/nexthdr+ offset and pipe
action
Test 23a1: Add cgroup filter with canid ematch and single SFF
Test 324f: Add cgroup filter with canid ematch and single SFF with mask
Test 2576: Add cgroup filter with canid ematch and multiple SFF
Test 4839: Add cgroup filter with canid ematch and multiple SFF with masks
Test 6713: Add cgroup filter with canid ematch and single EFF
Test ab9d: Add cgroup filter with canid ematch and multiple EFF with masks
Test 5349: Add cgroup filter with canid ematch and a combination of
SFF/EFF
Test c934: Add cgroup filter with canid ematch and a combination of
SFF/EFF with masks
Test 4319: Replace cgroup filter with diffferent match
Test 4636: Delete cgroup filter
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test 23c3: Add cBPF filter with valid bytecode
Test 1563: Add cBPF filter with invalid bytecode
Test 2334: Add eBPF filter with valid object-file
Test 2373: Add eBPF filter with invalid object-file
Test 4423: Replace cBPF bytecode
Test 5122: Delete cBPF filter
Test e0a9: List cBPF filters
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 1b620d539c ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a regression test for commit 592335a416 ("bonding: accept
unsolicited NA message") and commit b7f14132bf ("bonding: use unspecified
address if no available link local address"). When the bond interface
up and no available link local address, unspecified address(::) is used to
send the NS message. The unsolicited NA message should also be accepted
for validation.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Link: https://lore.kernel.org/r/20220920033047.173244-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing
that queued packets are forwarded after installing a matching (S, G)
route.
The test cases can be used to reproduce the bugs fixed in "ipmr: Always
call ip{,6}_mr_forward() from RCU read-side critical section".
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous patch added a test which can be used instead of qos_burst.sh.
Remove this test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an equivalent test to qos_burst, the test's purpose is same, but the
new test uses simpler topology and does not require forcing low speed.
In addition, it can be run Spectrum-2 and not only Spectrum-3+. The idea
is to use a shaper in order to limit the traffic and create congestion.
qos_burst test uses small pool, sends many small packets, and verify that
packets are not dropped, which means that many descriptors can be handled.
This test should check the change that commit c864769add
("mlxsw: Configure descriptor buffers") pushed.
Instead, the new test tries to use more than 85% of maximum supported
descriptors. The idea is to use big pool (as much as the ASIC supports),
such that the pool size does not limit the traffic, then send many small
packets, which means that many descriptors are used, and check how many
packets the switch can handle.
The usage of shaper allows to run the test in all ASICs, regardless of
the CPU abilities, as it is able to create the congestion with low rate
of packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The maximum pool size is exposed via 'devlink sb' command. The next
patch will add a test which increases some pools to the maximum size.
Add a function to query the value.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run the tests there, some adjustments are required. Use shapers to limit
the traffic instead of forcing speed. Note that for several ports, the
speed configuration is just for autoneg issues, so shaper is not needed
instead.
The tests already use ETS qdisc as a root and RED qdiscs as children. Add
a new TBF shaper to limit the rate of traffic, and use it as a root qdisc,
then save the previous hierarchy of qdiscs under the new TBF root.
In some ASICs, the shapers do not limit the traffic as accurately as
forcing speed. To make the tests stable, allow the backlog size to be up to
+-10% of the threshold. The aim of the tests is to make sure that with
backlog << threshold, there are no drops, and that packets are dropped
somewhere in vicinity of the configured threshold.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
QOS tests create congestion and verify the switch behavior. To create
congestion, they need to have more traffic than the port can handle, so
some of them force 1Gbps speed.
The tests assume that 1Gbps speed is supported, otherwise, they will fail.
Spectrum-4 ASIC will not support this speed in all ports, so to be able
to run QOS tests there, some adjustments are required. Use shapers to
limit the traffic instead of forcing speed. Note that for several ports,
the speed configuration is just for autoneg issues, so shaper is not needed
instead.
In tests that already use shapers, set the existing shaper to be a child of
a new TBF shaper which is added as a root qdisc and acts as a port shaper.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test result message when test_task_storage_map_stress_lookup()
succeeds or is skipped. The test case can be skipped due to the choose
of preemption model in kernel config, so export skips in test_maps.c and
increase it when needed.
The following is the output of test_maps when the test case succeeds or
is skipped:
test_task_storage_map_stress_lookup:PASS
test_maps: OK, 0 SKIPPED
test_task_storage_map_stress_lookup SKIP (no CONFIG_PREEMPT)
test_maps: OK, 1 SKIPPED
Fixes: 73b97bc78b ("selftests/bpf: Test concurrent updates on bpf_task_storage_busy")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20220919035714.2195144-1-houtao@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
* kvm-arm64/single-step-async-exception:
: .
: Single-step fixes from Reiji Watanabe:
:
: "This series fixes two bugs of single-step execution enabled by
: userspace, and add a test case for KVM_GUESTDBG_SINGLESTEP to
: the debug-exception test to verify the single-step behavior."
: .
KVM: arm64: selftests: Add a test case for KVM_GUESTDBG_SINGLESTEP
KVM: arm64: selftests: Refactor debug-exceptions to make it amenable to new test cases
KVM: arm64: Clear PSTATE.SS when the Software Step state was Active-pending
KVM: arm64: Preserve PSTATE.SS for the guest while single-step is enabled
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a test case for KVM_GUESTDBG_SINGLESTEP to the debug-exceptions test.
The test enables single-step execution from userspace, and check if the
exit to userspace occurs for each instruction that is stepped.
Set the default number of the test iterations to a number of iterations
sufficient to always reproduce the problem that the previous patch fixes
on an Ampere Altra machine.
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220917010600.532642-5-reijiw@google.com
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, two of these tests set nid != NUMA_NO_NODE. All tests are
run for both top-down and bottom-up allocation directions.
The tested scenarios are:
Range unrestricted:
- region cannot be allocated:
+ none of the nodes have enough memory to allocate the region
Range restricted:
- region can be allocated in the specific node requested without dropping
min_addr:
+ the range fully overlaps with the node, and there are adjacent
reserved regions
- region cannot be allocated:
+ nid is set to NUMA_NO_NODE and the total range can fit the region,
but the range is split between two nodes and everything else is
reserved
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4b2c7e6e5f3a9837939e99293c77e0e6fc3ae4f9.1663046060.git.remckee0@gmail.com
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a bottom-up allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/00c4810daaf5d050abc71915b24ed7419bb16b51.1663046060.git.remckee0@gmail.com
Add tests for memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()
where the simulated physical memory is set up with multiple NUMA nodes.
Additionally, all of these tests set nid != NUMA_NO_NODE. These tests are
run with a top-down allocation direction.
The tested scenarios are:
Range unrestricted:
- region can be allocated in the specific node requested:
+ there are no previously reserved regions
+ the requested node is partially reserved but has enough space
- the specific node requested cannot accommodate the request, but the
region can be allocated in a different node:
+ there are no previously reserved regions, but node is too small
+ the requested node is fully reserved
+ the requested node is partially reserved and does not have
enough space
Range restricted:
- region can be allocated in the specific node requested after dropping
min_addr:
+ range partially overlaps with two different nodes, where the first
node is the requested node
+ range partially overlaps with two different nodes, where the
requested node ends before min_addr
- region cannot be allocated in the specific node requested, but it can be
allocated in the requested range:
+ range overlaps with multiple nodes along node boundaries, and the
requested node ends before min_addr
+ range overlaps with multiple nodes along node boundaries, and the
requested node starts after max_addr
- region cannot be allocated in the specific node requested, but it can be
allocated after dropping min_addr:
+ range partially overlaps with two different nodes, where the
second node is the requested node
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/84009c5b3969337ccf89df850db56d364f8c228b.1663046060.git.remckee0@gmail.com
Add function setup_numa_memblock() for setting up a memory layout with
multiple NUMA nodes in a previously allocated dummy physical memory.
This function can be used in place of setup_memblock() in tests that need
to simulate a NUMA system.
setup_numa_memblock():
- allows for setting up a memory layout by specifying the fraction of
MEM_SIZE in each node
Set CONFIG_NODES_SHIFT to 4 when building with NUMA=1 to allow for up to
16 NUMA nodes.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Rebecca Mckeever <remckee0@gmail.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/4566d816a85f009268d4858d1ef06c7571a960f9.1663046060.git.remckee0@gmail.com
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3671: Delete tunnel_key set action with valid index
Test 8597: Delete tunnel_key set action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 3872: Delete sample action with valid index
Test a394: Delete sample action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test b811: Delete nat action with valid index
Test a521: Delete nat action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test a972: Delete ife encode action with valid index
Test 1272: Delete ife encode action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 6571: Delete connmark action with valid index
Test 3426: Delete connmark action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 2029: Add xt action with log-prefix
Test 3562: Replace xt action log-prefix
Test 8291: Delete xt action with valid index
Test 5169: Delete xt action with invalid index
Test 7284: List xt actions
Test 5010: Flush xt actions
Test 8437: Add xt action with duplicate index
Test 2837: Add xt action with invalid index
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test 5153: Add gate action with priority and sched-entry
Test 7189: Add gate action with base-time
Test a721: Add gate action with cycle-time
Test c029: Add gate action with cycle-time-ext
Test 3719: Replace gate base-time action
Test d821: Delete gate action with valid index
Test 3128: Delete gate action with invalid index
Test 7837: List gate actions
Test 9273: Flush gate actions
Test c829: Add gate action with duplicate index
Test 3043: Add gate action with invalid index
Test 2930: Add gate action with cookie
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test c826: Add ctinfo action with default setting
Test 0286: Add ctinfo action with dscp
Test 4938: Add ctinfo action with valid cpmark and zone
Test 7593: Add ctinfo action with drop control
Test 2961: Replace ctinfo action zone and action control
Test e567: Delete ctinfo action with valid index
Test 6a91: Delete ctinfo action with invalid index
Test 5232: List ctinfo actions
Test 7702: Flush ctinfo actions
Test 3201: Add ctinfo action with duplicate index
Test 8295: Add ctinfo action with invalid index
Test 3964: Replace ctinfo action with invalid goto_chain control
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
