Rather than embeddeding the display's device info within the main device
info structure, just provide a pointer to the display-specific
structure. This is in preparation for moving the display device info
definitions into the display code itself and for eventually allowing the
pointer to be assigned at runtime on platforms that use GMD_ID for
device identification.
In the future, this will also eventually allow the same display device
info structures to be used outside the current i915 code (e.g., from the
Xe driver).
v2:
- Move introduction of DISPLAY_INFO() to this patch. (Andrzej)
v3:
- Also use DISPLAY_INFO() in intel_display_reg_defs.h. (Andrzej)
- Use "{}" instead of "{ 0 }" for empty struct init. (Jani)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523195609.73627-3-matthew.d.roper@intel.com
PSR WM optimization should be disabled based on any wm level being
disabled. Also same WA should be applied for ICL as well.
Bspec: 71580
v5:
- Set in pre plane hook and clear in post plane hook
v4:
- Handle mode change in psr enable/disable
- Handle wm_level_disable changes separately in pre plane hook
v3:
- Split patch
v2:
- set/clear chicken bit in post_plane_update
- apply for ICL as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329150703.432072-4-jouni.hogander@intel.com
The pipe needs a certain amount of time during vblank to prefill
sufficiently. If the vblank is too short the relevant watermark
level must be disabled.
Start implementing the necessary calculations to check this.
Scaler and DSC prefill are left out for now as handling those
is not entirely trivial.
Also the PSR latency reporting override chicken bits would
need to be correctly configured based on the results of these
calculations. Just add some FIXMEs for now.
TODO: bspec isn't exactly crystal clear in its explanations
so quite a few open questions remain...
v2: Skip inacive pipes
Handle SAGV latency
v3: Rebase
v4: Fix handling of disabled wm levels (latency == 0)
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306164854.25928-1-ville.syrjala@linux.intel.com
There was a specific SW workaround requested, which should prevent
some watermark issues happening, which requires copying highest
enabled wm level to those disabled wm levels(bit 31 is of course
still needs to be cleared).
This is related to different subsystems like PSR and others, which
may still consult a low power wm values ocassionally, despite those
are disabled. For that reason we need to keep sane values in
correspondent registers, even when those are disabled.
HSDES: 22016115093
v2: Remove redundant WA for ICL and extend this WA for all platforms
starting from SKL, as it seems that we needed this anyway on
all of those(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230213164453.5782-1-stanislav.lisovskiy@intel.com
Get rid of the if ladder in intel_modeset_setup_hw_state() and hide a
number of functions by adding a .get_hw_state() hook to watermark
functions. At least for now, combine the platform specific sanitization
to the hw state readouts on the relevant platforms instead of adding a
separate hook for that.
There's a functional change on PCH split platforms: If i9xx_wm_init()
fails to read plane latency and chooses the nop functions,
ilk_wm_get_hw_state() won't get called for readout. Add the
ilk_init_lp_watermarks() call on that path which now won't be called in
.get_hw_state(), as it looks like the only thing that could make a
difference.
v2:
- Add missing static (kernel test robot)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6da32831e40606cc8b90491b83196917f2ce36ab.1676317696.git.jani.nikula@intel.com
Add new files intel_wm.[ch] and i9xx_wm.[ch] under display/ to hold
generic and pre-SKL watermark code, respectively. SKL+ watermark code
has already been split out to skl_watermark.[ch].
Use the _wm.[ch] naming for brevity; we may want to rename
skl_watermark.[ch] later accordingly.
Add new intel_wm_init() to call either skl_wm_init() or
i9xx_wm_init(i915) depending on the platform, the latter comprising of
the remains of intel_init_pm().
Sprinkle in some minor checkpatch fixes while moving the code.
v2:
- Rebase
- Fix copyright year
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddf04a07a37f0368b3fef85d4ebb924082fec6cd.1676317696.git.jani.nikula@intel.com
Replaces wm.max_level with wm.num_levels, since that generally
results in nicer looking code (for-loops can be in standard
form etc.).
Also get rid of the two different wrappers we have for this
(ilk_wm_max_level() and intel_wm_num_levels()). They don't
really do anything for us other than potentially slow things
down if the compiler actually emits the function calls every
time (num_planes*num_wm_levels*higher_level_wm_function_calls
could be a big number). The watermark code already shows up
far too prominently in cpu profiles. Though I must admit that
I didn't look at the generated code this time.
v2: Fix the ilk_wm_merge() off-by-one (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209222504.31478-1-ville.syrjala@linux.intel.com
Switch ilk+ and skl+ platforms to also setting up
wm.max_level and remove a bunch of if ladders as a result.
There will be a tiny change in the debugfs on CHV machines
that have DVFS disabled in the BIOS. Presviously debugfs
would show the latency for the DVFS level as well, but
that will no longer be the case. Which is arguably better
as that number is absolutely meaningless when DVFS can't
be enabled anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209003251.32021-1-ville.syrjala@linux.intel.com
Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.
However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).
Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.
Fixes: a301cb0fca ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Current implementation of async flip w/a relies on assumption that
previous atomic commit contains valid information if async_flip is still
enabled on the plane. It is incorrect. If previous commit did not modify
the plane its state->uapi.async_flip can be false. As a result DMAR/PIPE
errors can be observed:
i915 0000:00:02.0: [drm] *ERROR* Fault errors on pipe A: 0x00000080
i915 0000:00:02.0: [drm] *ERROR* Fault errors on pipe A: 0x00000080
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:02.0] fault addr 0x0 [fault reason 0x06] PTE Read access is not set
v2: update async_flip_planes in more reliable places (Ville)
v3: reset async_flip_planes and do_async_flip in more scenarios (Ville)
v4: move all resets to plane loops (Ville)
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127153003.2225111-1-andrzej.hajda@intel.com
From Meteorlake, Latency Level, SAGV bloack time are read from
LATENCY_SAGV register instead of the GT driver pcode mailbox. DDR type
and QGV information are also to be read from Mem SS registers.
v2:
- Simplify MTL_MEM_SS_INFO_QGV_POINT macro(MattR)
- Nit: Rearrange the bit def's from higher to lower(MattR)
- Restore platform definition for ADL-P(MattR)
- Move back intel_qgv_point def to intel_bw.c(Jani)
v3:
- Rebase
Bspec: 64636, 64608
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Original Author: Caz Yokoyama
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902060342.151824-9-radhakrishna.sripada@intel.com
