commit fb5bbae9b1 upstream.
Exercising the gpu reloc path strenuously revealed an issue where the
updated relocations (from MI_STORE_DWORD_IMM) were not being observed
upon execution. After some experiments with adding pipecontrols (a lot
of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe
controls or even the current on), it was discovered that we merely
needed to delay the EMIT_INVALIDATE by several flushes. It is important
to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that
needs the delay as opposed to what one might first expect -- that the
delay is required for the TLB invalidation to take effect (one presumes
to purge any CS buffers) as opposed to a delay after flushing to ensure
the writes have landed before triggering invalidation.
Testcase: igt/gem_tiled_fence_blits
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181105094305.5767-1-chris@chris-wilson.co.uk
(cherry picked from commit 55f99bf2a9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df5e31c204 upstream.
We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).
This seems to have been broken by commit b6b178a772 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.
Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a772 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit a748faea3b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c02ba4ef16 upstream.
Since we need to be able to allow DPMS on->off prop changes after an MST
port has disappeared from the system, we need to be able to make sure we
can compute a config for the resulting atomic commit. Currently this is
impossible when the port has disappeared, since the VCPI slot searching
we try to do in intel_dp_mst_compute_config() will fail with -EINVAL.
Since the only commits we want to allow on no-longer-present MST ports
are ones that shut off display hardware, we already know that no VCPI
allocations are needed. So, hardcode the VCPI slot count to 0 when
intel_dp_mst_compute_config() is called on an MST port that's gone.
Changes since V4:
- Don't use mst_port_gone at all, just check whether or not the drm
connector is registered - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-5-lyude@redhat.com
(cherry picked from commit f67207d78c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80c188695a upstream.
Currently we set intel_connector->mst_port to NULL to signify that the
MST port has been removed from the system so that we can prevent further
action on the port such as connector probes, mode probing, etc.
However, we're going to need access to intel_connector->mst_port in
order to fixup ->best_encoder() so that it can always return the correct
encoder for an MST port to prevent legacy DPMS prop changes from
failing. This should be safe, so instead keep intel_connector->mst_port
always set and instead just check the status of
drm_connector->regustered to signify whether or not the connector has
disappeared from the system.
Changes since v2:
- Add a comment to mst_port_gone (Jani Nikula)
- Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
Apparently bool is discouraged in structs these days
Changes since v4:
- Don't use mst_port_gone at all! Just check if the connector is
registered or not - Daniel Vetter
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-4-lyude@redhat.com
(cherry picked from commit 6ed5bb1fba)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b27390139 upstream.
When we decide that a plane is attached to the wrong pipe we try
to turn off said plane. However we are passing around the crtc we
think that the plane is supposed to be using rather than the crtc
it is currently using. That doesn't work all that well because
we may have to do vblank waits etc. and the other pipe might
not even be enabled here. So let's pass the plane's current crtc to
intel_plane_disable_noatomic() so that it can its job correctly.
To do that semi-cleanly we also have to change the plane readout
to record the plane's visibility into the bitmasks of the crtc
where the plane is currently enabled rather than to the crtc
we want to use for the plane.
One caveat here is that our active_planes bitmask will get confused
if both planes are enabled on the same pipe. Fortunately we can use
plane_mask to reconstruct active_planes sufficiently since
plane_mask still has the same meaning (is the plane visible?)
during readout. We also have to do the same during the initial
plane readout as the second plane could clear the active_planes
bit the first plane had already set.
v2: Rely on fixup_active_planes() to populate active_planes fully (Daniel)
Add Daniel's proposed comment to better document why we do this
Drop the redundant intel_set_plane_visible() call
Cc: stable@vger.kernel.org # fcba862e8428 drm/i915: Have plane->get_hw_state() return the current pipe
Cc: stable@vger.kernel.org
Cc: Dennis <dennis.nezic@utoronto.ca>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Dennis <dennis.nezic@utoronto.ca>
Tested-by: Peter Nowee <peter.nowee@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105637
Fixes: b1e01595a6 ("drm/i915: Redo plane sanitation during readout")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003145017.4527-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 62358aa4ee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e8afefd5d upstream.
The Acer One 10 uses a clamshell design with a detachable keyboard.
As such in normal operating mode, with the keyboard attach the device
is in landscape mode (and the Acer logo at boot also shows in landscape
mode).
But the device uses a portrait screen rotated 90 degrees (sigh). This
commit adds a quirk for this device so that we shown the fbcon the
right way up and that we hint userspace to also show e.g. plymouth and
gdm the right way up.
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012101610.29100-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fce3a4061 upstream.
The GPU hardware fences and the job out-fences are on different timelines
so it's wrong to compare them. Fix this by only looking at the out-fence.
Cc: <stable@vger.kernel.org>
Fixes: 2c83a726d6 (drm/etnaviv: bring back progress check in job
timeout handler)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b0f61e91b upstream.
As mentioned in the previous commit, we currently prevent new modesets
on recently-removed MST connectors by returning no encoder from our
->best_encoder() callback once the MST port has disappeared. This is
wrong however, because it prevents legacy modesetting users from being
able to disable CRTCs on MST connectors after the connector's respective
topology has disappeared.
So, fix this by instead by just always returning a valid encoder.
Changes since v2:
- Remove usage of atomic MST helper for now, since that got replaced
with a much simpler solution
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181008232437.5571-3-lyude@redhat.com
(cherry picked from commit e87b0bbc9f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 582f58de36 upstream.
Currently we return NOTIFY_DONE for any event which we don't think is
ours. However, many laptops will send more then just an ATIF event and
will also send an ACPI_VIDEO_NOTIFY_PROBE event as well. Since we don't
check for this, we return NOTIFY_DONE which causes a keypress for the
ACPI event to be propogated to userspace. This is the equivalent of
someone pressing the display key on a laptop every time there's a
hotplug event.
So, check for ACPI_VIDEO_NOTIFY_PROBE events and suppress keypresses
from them.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3ef5dedb upstream.
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9a7082327 upstream.
Use the new of_get_compatible_child() helper to lookup the legacy
pwrlevels child node instead of using of_find_compatible_node(), which
searches the entire tree from a given start node and thus can return an
unrelated (i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the probed device's node).
While at it, also fix the related child-node reference leak.
Fixes: e2af8b6b0c ("drm/msm: gpu: Use OPP tables if we can")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff30e9e850 ]
We accidentally left out the size of the amdgpu_bo_list struct. It
could lead to memory corruption on 32 bit systems. You'd have to
pick the absolute maximum and set "num_entries == 59652323" then size
would wrap to 16 bytes.
Fixes: 920990cb08 ("drm/amdgpu: allocate the bo_list array after the list")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d8de8260a4 ]
After GPU reset amdgpu_vm_clear_bo triggers VM flush
but job->vm_pd_addr is not set causing SDMA TO.
v2:
Per advise by Christian König avoid flushing VM for jobs where
job->vm_pd_addr wasn't explicitly set.
v3:
Shortcut vm_flush_needed early.
Fixes cbd5285 drm/amdgpu: move setting the GART addr into TTM.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 30049754ab ]
[WHY]
Previously night light forced a full update by
applying a transfer function update regardless of if it was changed.
This logic was removed,
Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.
[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 481f576c6c ]
[Why]
The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.
That change caused display corruption under certain hardware
configurations with Vega10.
[How]
The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).
Tested-by: Nick Sarnie <sarnex@gentoo.org>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 538f66ba20 ]
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 96fc56a775 ]
The atomic_check is a bit too aggressive with respect to planes which
leave the active area. This caused a bunch of log spew when the cursor
got to the edge of the screen and stopped it from going all the way.
This patch removes the conservative bounds checks from atomic and clips
the dst rect such that we properly display planes which go off the
screen.
Changes in v2:
- Apply the clip to src as well (taking into account scaling)
Changes in v3:
- Use drm_atomic_helper_check_plane_state() to clip src/dst
Cc: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c043eeffe ]
We got a bug report that this function oopses when trying to do a kasprintf().
PC is at string+0x2c/0x60
LR is at vsnprintf+0x28c/0x4ec
pc : [<ffffff80088d35d8>] lr : [<ffffff80088d5fc4>] pstate: a0c00049
sp : ffffff80095fb540
x29: ffffff80095fb540 x28: ffffff8008ad42bc
x27: 00000000ffffffd8 x26: 0000000000000000
x25: ffffff8008c216c8 x24: 0000000000000000
x23: 0000000000000000 x22: ffffff80095fb720
x21: 0000000000000000 x20: ffffff80095fb720
x19: ffffff80095fb6f0 x18: 000000000000000a
x17: 00000000b42ba473 x16: ffffff800805bbe8
x15: 00000000000a157d x14: 000000000000000c
x13: 0000000000000000 x12: 0000ffff0000000f
x11: 0000000000000003 x10: 0000000000000001
x9 : 0000000000000040 x8 : 000000000000001c
x7 : ffffffffffffffff x6 : 0000000000000000
x5 : 0000000000000228 x4 : 0000000000000000
x3 : ffff0a00ffffff04 x2 : 0000000000007961
x1 : 0000000000000000 x0 : 0000000000000000
Process kworker/3:1 (pid: 61, stack limit = 0xffffff80095f8000)
Call trace:
Exception stack(0xffffff80095fb400 to 0xffffff80095fb540)
b400: 0000000000000000 0000000000000000 0000000000007961 ffff0a00ffffff04
b420: 0000000000000000 0000000000000228 0000000000000000 ffffffffffffffff
b440: 000000000000001c 0000000000000040 0000000000000001 0000000000000003
b460: 0000ffff0000000f 0000000000000000 000000000000000c 00000000000a157d
b480: ffffff800805bbe8 00000000b42ba473 000000000000000a ffffff80095fb6f0
b4a0: ffffff80095fb720 0000000000000000 ffffff80095fb720 0000000000000000
b4c0: 0000000000000000 ffffff8008c216c8 0000000000000000 00000000ffffffd8
b4e0: ffffff8008ad42bc ffffff80095fb540 ffffff80088d5fc4 ffffff80095fb540
b500: ffffff80088d35d8 00000000a0c00049 ffffff80095fb550 ffffff80080d06a4
b520: ffffffffffffffff ffffff80088d5e0c ffffff80095fb540 ffffff80088d35d8
[<ffffff80088d35d8>] string+0x2c/0x60
[<ffffff80088d5fc4>] vsnprintf+0x28c/0x4ec
[<ffffff80083973b8>] kvasprintf+0x68/0x100
[<ffffff800839755c>] kasprintf+0x60/0x80
[<ffffff800849cc24>] drm_encoder_init+0x134/0x164
[<ffffff80084d9a7c>] dpu_encoder_init+0x60/0x94
[<ffffff80084eced0>] _dpu_kms_drm_obj_init+0xa0/0x424
[<ffffff80084ed870>] dpu_kms_hw_init+0x61c/0x6bc
[<ffffff80084f7614>] msm_drm_bind+0x380/0x67c
[<ffffff80085114e4>] try_to_bring_up_master+0x228/0x264
[<ffffff80085116e8>] component_master_add_with_match+0x90/0xc0
[<ffffff80084f722c>] msm_pdev_probe+0x260/0x2c8
[<ffffff800851a910>] platform_drv_probe+0x58/0xa8
[<ffffff80085185c8>] driver_probe_device+0x2d8/0x40c
[<ffffff8008518928>] __device_attach_driver+0xd4/0x10c
[<ffffff800851644c>] bus_for_each_drv+0xb4/0xd0
[<ffffff8008518230>] __device_attach+0xd0/0x160
[<ffffff8008518984>] device_initial_probe+0x24/0x30
[<ffffff800851744c>] bus_probe_device+0x38/0x98
[<ffffff8008517aac>] deferred_probe_work_func+0x144/0x148
[<ffffff80080c8654>] process_one_work+0x218/0x3bc
[<ffffff80080c883c>] process_scheduled_works+0x44/0x48
[<ffffff80080c95bc>] worker_thread+0x288/0x32c
[<ffffff80080cea30>] kthread+0x134/0x13c
[<ffffff8008084750>] ret_from_fork+0x10/0x18
Code: 910003fd 2a0403e6 eb0400ff 54000060 (38646845)
Looking at the code I see that drm_encoder_init() is called from the DPU
code with 'DRM_MODE_CONNECTOR_DSI' passed in as the 'encoder_type'
argument (follow from _dpu_kms_initialize_dsi()). That corresponds to
the integer 16. That is then indexed into drm_encoder_enum_list in
drm_encoder_init() to look up the name of the encoder. If you're still
following along, that's an encoder not a connector! We really want to
use DRM_MODE_ENCODER_DSI (integer 6) instead of DRM_MODE_CONNECTOR_DSI
here, or we'll go out of bounds of the encoder array. Pass the right
thing and everything is fine.
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Fixes: 25fdd5933e (drm/msm: Add SDM845 DPU support)
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6969019f65 ]
When CONFIG_DEV_COREDUMP isn't defined msm_gpu_crashstate_capture
doesn't pass the correct parameters.
drivers/gpu/drm/msm/msm_gpu.c: In function ‘recover_worker’:
drivers/gpu/drm/msm/msm_gpu.c:479:34: error: passing argument 2 of ‘msm_gpu_crashstate_capture’ from incompatible pointer type [-Werror=incompatible-pointer-types]
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: expected ‘char *’ but argument is of type ‘struct msm_gem_submit *’
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:479:2: error: too many arguments to function ‘msm_gpu_crashstate_capture’
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: declared here
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
In current code the function msm_gpu_crashstate_capture parameters.
Fixes: cdb95931de ("drm/msm/gpu: Add the buffer objects from the submit to the crash dump")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-By: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14b284832e ]
There are several switch statements that are missing break statements.
Add missing breaks to handle any fall-throughs corner cases.
Detected by CoverityScan, CID#1457175 ("Missing break in switch")
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43c3ff27a4 ]
[Why]
A loop inside of build_evenly_distributed_points function that traverse through
the array of points become an infinite loop when m_GammaUpdates does not
get assigned to any value.
[How]
In DMColor, clear m_gammaIsValid bit just before writting all Zeromem for
m_GammaUpdates, to prevent calling build_evenly_distributed_points
before m_GammaUpdates gets assigned to some value.
Signed-off-by: Su Sung Chung <Su.Chung@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc09ab7a76 upstream.
The commit 37a3a98ef6 ("ALSA: hda - Enable runtime PM only for
discrete GPU") added a new ops gpu_bound to be called when GPU gets
bound. The patch overlooked, however, that vga_switcheroo_enable() is
called only once at GPU is bound. When an audio client is registered
after that point, it would miss the gpu_bound call. This leads to the
unexpected lack of runtime PM in HD-audio side.
For addressing that regression, just call gpu_bound callback manually
at vga_switcheroo_register_audio_client() when the GPU was already
bound.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201615
Fixes: 37a3a98ef6 ("ALSA: hda - Enable runtime PM only for discrete GPU")
Cc: <stable@vger.kernel.org>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ceff2f4dcd upstream.
Use the new of_get_compatible_child() helper to lookup the sibling
instead of using of_find_compatible_node(), which searches the entire
tree from a given start node and thus can return an unrelated (i.e.
non-sibling) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent device node).
While at it, also fix the related cec-node reference leak.
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Cc: stable <stable@vger.kernel.org> # 4.8
Cc: Junzhi Zhao <junzhi.zhao@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a general protection fault, caused by accessing the contents
of a flip_done completion object that has already been freed. It occurs
due to the preemption of a non-blocking commit worker thread W by
another commit thread X. X continues to clear its atomic state at the
end, destroying the CRTC commit object that W still needs. Switching
back to W and accessing the commit objects then leads to bad results.
Worker W becomes preemptable when waiting for flip_done to complete. At
this point, a frequently occurring commit thread X can take over. Here's
an example where W is a worker thread that flips on both CRTCs, and X
does a legacy cursor update on both CRTCs:
...
1. W does flip work
2. W runs commit_hw_done()
3. W waits for flip_done on CRTC 1
4. > flip_done for CRTC 1 completes
5. W finishes waiting for CRTC 1
6. W waits for flip_done on CRTC 2
7. > Preempted by X
8. > flip_done for CRTC 2 completes
9. X atomic_check: hw_done and flip_done are complete on all CRTCs
10. X updates cursor on both CRTCs
11. X destroys atomic state
12. X done
13. > Switch back to W
14. W waits for flip_done on CRTC 2
15. W raises general protection fault
The error looks like so:
general protection fault: 0000 [#1] PREEMPT SMP PTI
**snip**
Call Trace:
lock_acquire+0xa2/0x1b0
_raw_spin_lock_irq+0x39/0x70
wait_for_completion_timeout+0x31/0x130
drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper]
amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu]
commit_tail+0x3d/0x70 [drm_kms_helper]
process_one_work+0x212/0x650
worker_thread+0x49/0x420
kthread+0xfb/0x130
ret_from_fork+0x3a/0x50
Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O)
gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm(O) drm(O)
Note that i915 has this issue masked, since hw_done is signaled after
waiting for flip_done. Doing so will block the cursor update from
happening until hw_done is signaled, preventing the cursor commit from
destroying the state.
v2: The reference on the commit object needs to be obtained before
hw_done() is signaled, since that's the point where another commit
is allowed to modify the state. Assuming that the
new_crtc_state->commit object still exists within flip_done() is
incorrect.
Fix by getting a reference in setup_commit(), and releasing it
during default_clear().
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
