Convert fdinfo memory stats to use the common drm_print_memory_stats
helper.
This achieves alignment with the common keys as documented in
drm-usage-stats.rst, adding specifically drm-total- key the driver was
missing until now.
Additionally I made the code stop skipping total size for objects which
currently do not have a backing store, and I added resident, active and
purgeable reporting.
Legacy keys have been preserved, with the outlook of only potentially
removing only the drm-memory- when the time gets right.
The example output now looks like this:
pos: 0
flags: 02100002
mnt_id: 24
ino: 1239
drm-driver: amdgpu
drm-client-id: 4
drm-pdev: 0000:04:00.0
pasid: 32771
drm-total-cpu: 0
drm-shared-cpu: 0
drm-active-cpu: 0
drm-resident-cpu: 0
drm-purgeable-cpu: 0
drm-total-gtt: 2392 KiB
drm-shared-gtt: 0
drm-active-gtt: 0
drm-resident-gtt: 2392 KiB
drm-purgeable-gtt: 0
drm-total-vram: 44564 KiB
drm-shared-vram: 31952 KiB
drm-active-vram: 0
drm-resident-vram: 44564 KiB
drm-purgeable-vram: 0
drm-memory-vram: 44564 KiB
drm-memory-gtt: 2392 KiB
drm-memory-cpu: 0 KiB
amd-memory-visible-vram: 44564 KiB
amd-evicted-vram: 0 KiB
amd-evicted-visible-vram: 0 KiB
amd-requested-vram: 44564 KiB
amd-requested-visible-vram: 11952 KiB
amd-requested-gtt: 2392 KiB
drm-engine-compute: 46464671 ns
v2:
* Track purgeable via AMDGPU_GEM_CREATE_DISCARDABLE.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a sysfs interface to see available NPS modes to switch to -
cat /sys/bus/pci/devices/../available_memory_paritition
Make the current_memory_partition sysfs node read/write for requesting a
new NPS mode. The request is only cached and at a later point a driver
unload/reload is required to switch to the new NPS mode.
Ex:
echo NPS1 > /sys/bus/pci/devices/../current_memory_paritition
echo NPS4 > /sys/bus/pci/devices/../current_memory_paritition
The above interfaces will be available only if the SOC supports more than
one NPS mode.
Also modify the current memory partition sysfs logic to be more
generic.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a common interface in GMC to request NPS mode through PSP. Also add
a variable in hive and gmc control to track the last requested mode.
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v10_0 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v11_0 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v12_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v12_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch modifies the gfx_v11_0_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v11_0_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v11_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v11_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch modifies the gfx_v10_0_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v10_0_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v10_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v10_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: c2e70d307f ("drm/amdgpu/gfx9: Implement cleaner shader support for GFX9 hardware")
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some distributions have been patching amdgpu to enable overdrive by
default which may compromise stability. Furthermore when bug reports
are brought upstream it's not obvious that the system has been tampered
with.
When overdrive is enabled taint the kernel and leave a critical message
in the logs for users so that it's obvious in a bug report it's been
tampered with.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update kdoc entries to reflect the function's parameters. The descriptor
for the 'queue_cnt' parameter has been added, and the incorrect mentions
of 'wave_cnt' and 'vmid', which are not parameters but local variables,
have been removed.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:954: warning: Function parameter or struct member 'queue_cnt' not described in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:954: warning: Excess function parameter 'wave_cnt' description in 'get_wave_count'
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c:954: warning: Excess function parameter 'vmid' description in 'get_wave_count'
Cc: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Cc: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain use cases, NPS data needs to be refreshed again from
discovery table. Add API parameter to refresh NPS data from discovery
table.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for SDMA not to be switched between VM_INVALIDATION
request and ack, use an single VM_INVALIDATION packet in function
sdma_v5_2_ring_emit_vm_flush.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-By: Horace Chen <horace.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add partition config nodes in sysfs to get resource instance details for
a particular partition mode. A resource could be anything like an xcc,
vcn decoder, system dma units etc.
Details of various resource instances are available under
/sys/bus/pci/devices/.../compute_partition_config/
Select a partition configuration:
/sys/bus/pci/devices/.../compute_partition_config/xcp_config
Number of instances of a resource:
/sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_inst
Total partitions sharing the resource:
/sys/bus/pci/devices/.../compute_partition_config/<rsrc_name>/num_shared
v2: Update node name as per spec
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A reset on initialization will be needed if a new PSP TOS needs to be
loaded than the one currently active on the system. This is possible
only on SOCs which support a full device reset which results in unload
of active PSP TOS.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a separate function to read badpage data during initialization.
Reading bad pages will need hardware access and cannot be done during
reset. Hence in cases where device needs a full reset during
init itself, attempting to read will cause a deadlock.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
