Provide amdgpu_amdkfd_stop_sched() for amdgpu to stop KFD scheduling
compute work on HIQ. amdgpu_amdkfd_start_sched() resumes the scheduling.
When amdgpu_amdkfd_stop_sched is called, KFD will unmap queues from
runlist. If users send ioctls to KFD to create queues, they'll be added
but those queues won't be mapped to runlist (so not scheduled) until
amdgpu_amdkfd_start_sched is called.
v2: fix build (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
is_hws_hang and is_resetting serves pretty much the same purpose and
they all duplicates the work of the reset_domain lock, just check that
directly instead. This also eliminate a few bugs listed below and get
rid of dqm->ops.pre_reset.
kfd_hws_hang did not need to avoid scheduling another reset. If the
on-going reset decided to skip GPU reset we have a bad time, otherwise
the extra reset will get cancelled anyway.
remove_queue_mes forgot to check is_resetting flag compared to the
pre-MES path unmap_queue_cpsch, so it did not block hw access during
reset correctly.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
reset cause is requested by customer as additional
info for gpu reset smi event.
v2: integerate reset sources suggested by Lijo Lazar
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there are more than one device doing reset in parallel, the first
device will call kfd_suspend_all_processes() to evict all processes
on all devices, this call takes time to finish. other device will
start reset and recover without waiting. if the process has not been
evicted before doing recover, it will be restored, then caused page
fault.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In a future commit, the cwsr trap handler code size for gfx10.1 will
increase to slightly above the one page mark. Since the TMA does not
need to be page aligned, and only 2 pointers are stored in it, push
the TMA offset by 2 KiB and keep the TBA+TMA reserved memory size
to two pages.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a doorbell bo in kfd device structure.
- creates doorbell page for kfd kernel usages.
- updates the get_kernel_doorbell and free_kernel_doorbell functions
accordingly
V2: Do not use wrapper API, use direct amdgpu_create_kernel(Alex)
V3:
- Move single variable declaration below (Christian)
- Add a to-do item to reuse the KGD kernel level doorbells for
KFD for non-MES cases, instead of reserving one page (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX 9.4.3, interrupt handling needs to be updated for:
- Interrupt cookie will have a NodeId field. Each KFD
node needs to check the NodeId before processing the
interrupt.
- For CPX mode, there are additional checks of client ID
needed to process the interrupt.
- Add NodeId to the process drain interrupt.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a regression caused by a bad merge where
the handling of reserved SDMA queues was accidentally removed.
With the fix, the reserved SDMA queues are again correctly
marked as unavailable for allocation.
Fixes: a805889a15 ("drm/amdkfd: Update SDMA queue management for GFX9.4.3")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shader read, write and atomic memory operations can be alerted to the
debugger as an address watch exception.
Allow the debugger to pass in a watch point to a particular memory
address per device.
Note that there exists only 4 watch points per devices to date, so have
the KFD keep track of what watch points are allocated or not.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The debugger must be notified by any debugger subscribed exception
that comes from hardware interrupts.
If a debugger session exits, any exceptions it subscribed to may still
have interrupts in the interrupt ring buffer or KGD/KFD pipeline.
To prevent a new session from inheriting stale interrupts, when a new
queue is created, open an interrupt drain and allow the IH ring to drain
from a timestamped checkpoint. Then inject a custom IV so that once
the custom IV is picked up by the KFD, it's safe to close the drain
and proceed with queue creation.
The drain must also be on debug disable as SW interrupts may still
be processed. Drain at this time and clear all the exception status.
The debugger may also not be attached nor subscibed to certain
exceptions so forward them directly to the runtime.
GFX10 also requires its own IV processing, hence the creation of
kfd_int_process_v10.c. This is because the IV from SQ interrupts are
packed into a new continguous format unlike GFX9. To make this clear,
a separate interrupting handling code file was created.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Certain boards with GC IP 11.0.3 need slightly different handling
in the shader compiler due to board specific bounding box
optimizations.
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all the asic needs xcp. ensure check xcp availabity
before accessing its member.
v2: add missing change in kfd_topology.c
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename smv_migrate_init to a better name kgd2kfd_init_zone_device
because it setup zone devive pgmap for page migration and keep it in
kfd_migrate.c to access static functions svm_migrate_pgmap_ops. Call it
only once in amdgpu_device_ip_init after adev ip blocks are initialized,
but before amdgpu_amdkfd_device_init initialize kfd nodes which enable
SVM support based on pgmap.
svm_range_set_max_pages is called by kgd2kfd_device_init everytime after
switching compute partition mode.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
svm_migrate_init set the max svm range pages based on the KFD nodes
partition size. APU mode don't init pgmap because there is no migration.
kgd2kfd_device_init calls svm_migrate_init after KFD nodes allocation
and initialization.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to track memory usage on a per partition basis. To do
that, store the local memory information in KFD node instead
of kfd device.
v2: squash in fix ("amdkfd: Use mem_id to access mem_partition info")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Show KFD node memory partition id and size, add helper function
KFD_XCP_MEMORY_SIZE to get kfd node memory size, will be used
later to support memory accounting per partition.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of start xcc id and number of xcc per node, use the xcc mask
which is the mask of logical ids of xccs belonging to a parition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not required to take lock on all cases while querying partition
mode. Querying partition mode during KFD init process doesn't need to
take a lock. Init process after a switch will already be happening under
lock. Control the behaviour by adding flags to xcp_query_partition_mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd node allocation outside kfd->num_nodes loop is not needed and causes
memory leak because kfd->num_nodes is at least equal to 1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFXv9.4.3, use SOC level partition switch implementation rather than
keeping them at GFX IP level. Change the exisiting implementation in
GFX IP for keeping partition mode and restrict it to only GFX related
switch.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX9.4.3 will support dynamic repartitioning of the GPU through sysfs.
Add device repartitioning support in KFD to repartition GPU from one
mode to other.
v2: squash in fix ("drm/amdkfd: Fix warning kgd2kfd_unlock_kfd defined but not used")
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, even if kfd_locked is set, a process is first
created and then removed to work around a race condition
in updating kfd_locked flag. Rework kfd_locked handling to
ensure no processes is created if kfd_locked is set. This
is achieved by updating kfd_locked under kfd_processes_mutex.
With this there is no need for kfd_locked to be an atomic
counter. Instead, it can be a regular integer.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of number of XCCs, keep a mask of XCCs for the exact XCCs
available on the ASIC. XCC configuration could differ based on
different ASIC configs.
v2:
Rename num_xcd to num_xcc (Hawking)
Use smaller xcc_mask size, changed to u16 (Le)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
