[Why]
DCN401 currently has an issue re-enabling when pipe splitting is enabled,
while the root cause is being investigated we can make sure everything is
being reset as a workaround, by disabling boot optimization.
[How]
- use enable_accelerated_mode instead of init_pipes to fully reset asic
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds null checks for the 'stream' and 'plane' variables in
the dcn30_apply_idle_power_optimizations function. These variables were
previously assumed to be null at line 922, but they were used later in
the code without checking if they were null. This could potentially lead
to a null pointer dereference, which would cause a crash.
The null checks ensure that 'stream' and 'plane' are not null before
they are used, preventing potential crashes.
Fixes the below static smatch checker:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
When checking the subvp type of the previous state we must
pass in current_state to the interface instead of context
otherwise we will get the wrong result.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Refactor code and move fpo_in_use into stream_status to avoid
unexpected changes to previous dc_state (i.e., current_state).
Since stream pointers are shared between current and new dc_states,
updating parameters of one stream will update the other as well
which causes unexpected behaviors (i.e., checking that fpo_in_use
isn't set in previous state and set in the new state is invalid).
To avoid incorrect updates to current_state, move the fpo_in_use flag
into dc_stream_status since stream_status is owned by dc and are not
shared between different dc_states.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Vbios & Driver have difference pixel rate div policy.
When enabling fast boot & performing blank & unblank w/o timing setting,
pixel clock & pixel rate dividor are not match.
It would cause too high pixel reate and eDP would be black screen.
[How]
We would keep pixel rate div setting by Vbios until next timing setting.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: yi-lchen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect cursor position calculation in some scenarios. Also for
mirror and rotation cases.
[How]
Fix for incorrect cursor position. Added new test scenarios for diags
cursor test. Updated CRC for few of the diags cursor test scenarios.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sridevi <sarvinde@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
There is a corner case where we're in an ODM config that
has recout.x != 0. In these scenarios we have to take into
account the extra offset in the ODM adjustment for cursor.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Missing check for when there is new pipe configuration but both cur_pipe
and new_pipe are both populated causing update_state of DSC for that
instance not being updated correctly.
This causes some display mode changes to cause underflow since DSCCLK
is still gated when the display requires DSC.
[How]
Added another condition in the new pipe addition branch that checks if
there is a new pipe configuration and if it is not the same as cur_pipe.
cur_pipe does not necessarily have to be NULL to go in this branch.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently 3-tap chroma subsampling is used for YCbCr422/420. When ODM
pipesplit is used, pixels on the left edge of ODM slices need one extra
pixel from the right edge of the previous slice to calculate the correct
chroma value.
Without this change, the chroma value is slightly different than
expected. This is usually imperceptible visually, but it impacts test
pattern CRCs for compliance test automation.
[HOW]
Update logic to use the register for adding extra left edge pixel for
YCbCr422/420 ODM cases.
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
If there are no DC clock limits present, or if the DC limits are the same
as the AC limits, we can disable the AC/DC codepath as there won't be any
validation differences between the two modes.
[HOW]
When all DC power mode clock limits are the same as the max clock
values, there won't be any difference between AC mode and DC mode. Zero
out DC limits that equal max and provide a new cap to indicate the
presence of any non-zero DC mode limit. In summary:
- zero out DC limits that are the same as max clock value
- new dc cap to indicate the presence of DC mode limits
- set limits present if any clock has distinct AC and DC values from SMU
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Switching between DSC clock or disable DSC block are not double buffered update.
Corruption is observed if these updates happen before DSC double buffered
disconnection.
[how]
Move DSC disable and refclk reset to post unlock update. Wait for DSC double buffered
disconnection and all mpccs are disconnected before reset DSC clock.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Input mode for the DIG FIFO should be programmed as part of stream
encoder setup.
[HOW]
Pre-calculate the pixels per cycle as part of the pixel clock params,
and program as part of stream encoder setup.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes an unnecessary NULL check in the
`dcn10_set_input_transfer_func` function in the `dcn10_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1839 dcn10_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes a redundant NULL check in the
`dce110_set_input_transfer_func` function in the `dce110_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
Fixes the below smatch warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dce110/dce110_hwseq.c:301 dce110_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Today for MED update type we do not call update clocks. However, for FPO
the assumption is that update clocks should be called to disable P-State
switch before any HW programming since FPO in FW and driver are not
synchronized. This causes an issue where on a MED update, an FPO P-State
switch could be taking place, then driver forces P-State disallow in the below
code and prevents FPO from completing the sequence. In this case we add a check
to avoid re-programming (and thus re-setting) the P-State force register by
only reprogramming if the pipe was not previously Subvp or FPO. The assumption
is that the P-State force register should be programmed correctly the first
time SubVP / FPO was enabled, so there's no need to update / reset it if the
pipe config has never exited SubVP / FPO.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FIFO error can occur if we don't trigger a DISPCLK change after
touching K1/K2 dividers. For 4k144 eDP + hotplug of USB-C DP display
we see FIFO underflow.
[How]
We have the path to trigger the resync as the workaround in
DCN314/DCN32, it just needs to be ported over to DCN35.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
VBios & Driver may have differnet pixel rate div policy.
If the policy is not same and fast boot is enabled,
it would cause the pixel rate is too high
after driver only performs stream blank & unblank.
[how]
We would keep pixel rate div setting by VBios until next mode set.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Webb Chen <yi-lchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HWSS set_cursor_attributes copies the stream's cursor attributes
to the hubp cursor attributes. set_cursor_position might attempt
to program the cursor attributes but will program them wrong if
they're not set correctly. We need to call HWSS set_cursor_attributes
first to ensure hubp has the right attributes to be programmed.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We're seeing issues when user-space tries to do an atomic update of
the primary surface, as well as the cursor. These two updates are
separate calls into DC and don't currently act as an atomic update.
This might lead to cursor updates being locked out and cursors
stuttering.
In order to solve this problem we want to separate the setting
and programming of cursor attributes and position. That's what
we're doing in this patch. The subsequent patch will then be
able to use the cursor setters in independent cursor updates,
as well as in atomic commits.
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes an unnecessary NULL check in the
`dcn20_set_input_transfer_func` function in the `dcn20_hwseq.c` file.
The variable `tf` is assigned the address of
`plane_state->in_transfer_func` unconditionally, so it can never be
`NULL`. Therefore, the check `if (tf == NULL)` is unnecessary and has
been removed.
The plane_state->in_transfer_func itself cannot be NULL because it's a
structure, not a pointer. When we do tf =
&plane_state->in_transfer_func;, we're getting the address of that
structure, which will always be valid as long as plane_state itself is
not NULL.
we've already checked if plane_state is NULL with the line if (dpp_base
== NULL || plane_state == NULL) return false;. So, if the code execution
gets to the point where tf = &plane_state->in_transfer_func; is called,
plane_state is guaranteed to be not NULL, and therefore tf will also not
be NULL.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c
1094 bool dcn20_set_input_transfer_func(struct dc *dc,
1095 struct pipe_ctx *pipe_ctx,
1096 const struct dc_plane_state *plane_state)
1097 {
1098 struct dce_hwseq *hws = dc->hwseq;
1099 struct dpp *dpp_base = pipe_ctx->plane_res.dpp;
1100 const struct dc_transfer_func *tf = NULL;
^^^^^^^^^ This assignment is not necessary now.
1101 bool result = true;
1102 bool use_degamma_ram = false;
1103
1104 if (dpp_base == NULL || plane_state == NULL)
1105 return false;
1106
1107 hws->funcs.set_shaper_3dlut(pipe_ctx, plane_state);
1108 hws->funcs.set_blend_lut(pipe_ctx, plane_state);
1109
1110 tf = &plane_state->in_transfer_func;
^^^^^
Before there was an if statement but now tf is assigned unconditionally
1111
--> 1112 if (tf == NULL) {
^^^^^^^^^^^^^^^^^
so these conditions are impossible.
1113 dpp_base->funcs->dpp_set_degamma(dpp_base,
1114 IPP_DEGAMMA_MODE_BYPASS);
1115 return true;
1116 }
1117
1118 if (tf->type == TF_TYPE_HWPWL || tf->type == TF_TYPE_DISTRIBUTED_POINTS)
1119 use_degamma_ram = true;
1120
1121 if (use_degamma_ram == true) {
1122 if (tf->type == TF_TYPE_HWPWL)
1123 dpp_base->funcs->dpp_program_degamma_pwl(dpp_base,
Fixes the below Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn20/dcn20_hwseq.c:1112 dcn20_set_input_transfer_func() warn: address of 'plane_state->in_transfer_func' is non-NULL
Fixes: 285a7054bf ("drm/amd/display: Remove plane and stream pointers from dc scratch")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
