idpf uses Page Pool for data buffers with hardcoded buffer lengths of
4k for "classic" buffers and 2k for "short" ones. This is not flexible
and does not ensure optimal memory usage. Why would you need 4k buffers
when the MTU is 1500?
Use libeth for the data buffers and don't hardcode any buffer sizes. Let
them be calculated from the MTU for "classics" and then divide the
truesize by 2 for "short" ones. The memory usage is now greatly reduced
and 2 buffer queues starts make sense: on frames <= 1024, you'll recycle
(and resync) a page only after 4 HW writes rather than two.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, idpf uses the following model for the header buffers:
* buffers are allocated via dma_alloc_coherent();
* when receiving, napi_alloc_skb() is called and then the header is
copied to the newly allocated linear part.
This is far from optimal as DMA coherent zone is slow on many systems
and memcpy() neutralizes the idea and benefits of the header split. Not
speaking of that XDP can't be run on DMA coherent buffers, but at the
same time the idea of allocating an skb to run XDP program is ill.
Instead, use libeth to create page_pools for the header buffers, allocate
them dynamically and then build an skb via napi_build_skb() around them
with no memory copy. With one exception...
When you enable header split, you expect you'll always have a separate
header buffer, so that you could reserve headroom and tailroom only
there and then use full buffers for the data. For example, this is how
TCP zerocopy works -- you have to have the payload aligned to PAGE_SIZE.
The current hardware running idpf does *not* guarantee that you'll
always have headers placed separately. For example, on my setup, even
ICMP packets are written as one piece to the data buffers. You can't
build a valid skb around a data buffer in this case.
To not complicate things and not lose TCP zerocopy etc., when such thing
happens, use the empty header buffer and pull either full frame (if it's
short) or the Ethernet header there and build an skb around it. GRO
layer will pull more from the data buffer later. This W/A will hopefully
be removed one day.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Unlike previous generations, idpf requires more buffer types for optimal
performance. This includes: header buffers, short buffers, and
no-overhead buffers (w/o headroom and tailroom, for TCP zerocopy when
the header split is enabled).
Introduce libeth Rx buffer type and calculate page_pool params
accordingly. All the HW-related details like buffer alignment are still
accounted. For the header buffers, pick 256 bytes as in most places in
the kernel (have you ever seen frames with bigger headers?).
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Page Pool Ethtool stats are deprecated since the Netlink Page Pool
interface introduction.
idpf receives big changes in Rx buffer management, including &page_pool
layout, so keeping these deprecated stats does only harm, not speaking
of that CONFIG_IDPF selects CONFIG_PAGE_POOL_STATS unconditionally,
while the latter is often turned off for better performance.
Remove all the references to PP stats from the Ethtool code. The stats
are still available in their full via the generic Netlink interface.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf's in-kernel parsed ptype structure is almost identical to the one
used in the previous Intel drivers, which means it can be converted to
use libeth's definitions and even helpers. The only difference is that
it doesn't use a constant table (libie), rather than one obtained from
the device.
Remove the driver counterpart and use libeth's helpers for hashes and
checksums. This slightly optimizes skb fields processing due to faster
checks. Also don't define big static array of ptypes in &idpf_vport --
allocate them dynamically. The pointer to it is anyway cached in
&idpf_rx_queue.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, all HW supporting idpf supports the singleq model, but none
of it advertises it by default, as splitq is supported and preferred
for multiple reasons. Still, this almost dead code often times adds
hotpath branches and redundant cacheline accesses.
While it can't currently be removed, add CONFIG_IDPF_SINGLEQ and build
the singleq code only when it's enabled manually. This corresponds to
-10 Kb of object code size and a good bunch of hotpath checks.
idpf_is_queue_model_split() works as a gate and compiles out to `true`
when the config option is disabled.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the queue and queue vector structures are separated and laid
out optimally, group the fields as read-mostly, read-write, and cold
cachelines and add size assertions to make sure new features won't push
something out of its place and provoke perf regression.
Despite looking innocent, this gives up to 2% of perf bump on Rx.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
With CONFIG_MAXSMP, sizeof(cpumask_t) is 1 Kb. The queue vector
structure has them embedded, which means 1 additional Kb of not
really hotpath data.
We have cpumask_var_t, which is either an embedded cpumask or a pointer
for allocating it dynamically when it's big. Use it instead of plain
cpumasks and put &idpf_q_vector on a good diet.
Also remove redundant pointer to the interrupt name from the structure.
request_irq() saves it and free_irq() returns it on deinit, so that you
can free the memory.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, sizeof(struct idpf_queue) is 32 Kb.
This is due to the 12-bit hashtable declaration at the end of the queue.
This HT is needed only for Tx queues when the flow scheduling mode is
enabled. But &idpf_queue is unified for all of the queue types,
provoking excessive memory usage.
The unified structure in general makes the code less effective via
suboptimal fields placement. You can't avoid that unless you make unions
each 2 fields. Even then, different field alignment etc., doesn't allow
you to optimize things to the limit.
Split &idpf_queue into 4 structures corresponding to the queue types:
RQ (Rx queue), SQ (Tx queue), FQ (buffer queue), and CQ (completion
queue). Place only needed fields there and shortcuts handy for hotpath.
Allocate the abovementioned hashtable dynamically and only when needed,
keeping &idpf_tx_queue relatively short (192 bytes, same as Rx). This HT
is used only for OOO completions, which aren't really hotpath anyway.
Note that this change must be done atomically, otherwise it's really
easy to get lost and miss something.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In C, we have structures and unions.
Casting `void *` via macros is not only error-prone, but also looks
confusing and awful in general.
In preparation for splitting the queue structs, replace it with a
union and direct array dereferences.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It is theoretically possible to return bogus uninitialized values from
mlx5_tc_ct_entry_replace_rules, even though in practice this will never
be the case as the flow rule will be part of at least the regular ct
table or the ct nat table, if not both.
But to reduce noise, initialize err to 0.
Fixes: 49d37d05f2 ("net/mlx5: CT: Separate CT and CT-NAT tuple entries")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240708080025.1593555-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 31a0fa0019 ("thermal/debugfs: Pass cooling device state to
thermal_debug_cdev_add()") changed the thermal core to read the current
state of the cooling device as part of the cooling device's
registration. This is incompatible with the current implementation of
the cooling device operations in mlxsw, leading to initialization
failure with errors such as:
mlxsw_spectrum 0000:01:00.0: Failed to register cooling device
mlxsw_spectrum 0000:01:00.0: cannot register bus device
The reason for the failure is that when the get current state operation
is invoked the driver tries to derive the index of the cooling device by
walking a per thermal zone array and looking for the matching cooling
device pointer. However, the pointer is returned from the registration
function and therefore only set in the array after the registration.
The issue was later fixed by commit 1af89dedc8 ("thermal: core: Do not
fail cdev registration because of invalid initial state") by not failing
the registration of the cooling device if it cannot report a valid
current state during registration, although drivers are responsible for
ensuring that this will not happen.
Therefore, make sure the driver is able to report a valid current state
for the cooling device during registration by passing to the
registration function a per cooling device private data that already has
the cooling device index populated.
While at it, call thermal_cooling_device_unregister() unconditionally
since the function returns immediately if the cooling device pointer is
NULL.
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/c823c4678b6b7afb902c35b3551c81a053afd110.1720447210.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A forgotten or buggy variable initialization can cause out-of-bounds access
to a register or other item array field. For an overflow, such access would
mangle adjacent parts of the register payload. For an underflow, due to all
variables being unsigned, the access would likely trample unrelated memory.
Since neither is correct, replace these accesses with accesses at the index
of 0, and warn about the issue.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/b988fb265c2f6c1206fe12d5bfdcfa188b7672d1.1720447210.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 6533e558c6 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c6 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When SMP is enabled and spinlocks are actually functional then there is
a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi
and ks8851_irq:
watchdog: BUG: soft lockup - CPU#0 stuck for 27s!
call trace:
queued_spin_lock_slowpath+0x100/0x284
do_raw_spin_lock+0x34/0x44
ks8851_start_xmit_spi+0x30/0xb8
ks8851_start_xmit+0x14/0x20
netdev_start_xmit+0x40/0x6c
dev_hard_start_xmit+0x6c/0xbc
sch_direct_xmit+0xa4/0x22c
__qdisc_run+0x138/0x3fc
qdisc_run+0x24/0x3c
net_tx_action+0xf8/0x130
handle_softirqs+0x1ac/0x1f0
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x3c/0x58
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x54/0x9c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x50
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
__netif_schedule+0x6c/0x80
netif_tx_wake_queue+0x38/0x48
ks8851_irq+0xb8/0x2c8
irq_thread_fn+0x2c/0x74
irq_thread+0x10c/0x1b0
kthread+0xc8/0xd8
ret_from_fork+0x10/0x20
This issue has not been identified earlier because tests were done on
a device with SMP disabled and so spinlocks were actually NOPs.
Now use spin_(un)lock_bh for TX queue related locking to avoid execution
of softirq work synchronously that would lead to a deadlock.
Fixes: 3dc5d44545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240706101337.854474-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 746ea74241 ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240705095317.12640-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt doesn't check if a ring is used by RSS contexts when reducing
ring count. Core performs a similar check for the drivers for
the main context, but core doesn't know about additional contexts,
so it can't validate them. bnxt_fill_hw_rss_tbl_p5() uses ring
id to index bp->rx_ring[], which without the check may end up
being out of bounds.
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Core does track the additional contexts in net-next, so we can
move this validation out of the driver as a follow up there.
Fixes: b3d0083caf ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240705020005.681746-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at
the time of the DMA reset. We can however extract the RX clock from the
internal SERDES block. Once the link is up, we can revert to the
previous state.
The AQR115C PHY doesn't support in-band signalling so we can count on
getting the link up notification and safely reuse existing callbacks
which are already used by another HW quirk workaround which enables the
functional clock to avoid a DMA reset due to timeout.
Only enable loopback on revision 3 of the board - check the phy_mode to
make sure.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240703181500.28491-3-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently the DW XPCS DT-bindings have been introduced and the DW XPCS
driver has been altered to support the DW XPCS registered as a platform
device. In order to have the DW XPCS DT-device accessed from the STMMAC
driver let's alter the STMMAC PCS-setup procedure to support the
"pcs-handle" property containing the phandle reference to the DW XPCS
device DT-node. The respective fwnode will be then passed to the
xpcs_create_fwnode() function which in its turn will create the DW XPCS
descriptor utilized in the main driver for the PCS-related setups.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the only STMMAC platform driver using the DW XPCS code is the
Intel mGBE device driver. (It can be determined by finding all the drivers
having the stmmac_mdio_bus_data::has_xpcs flag set.) At the same time the
low-level platform driver masks out the DW XPCS MDIO-address from being
auto-detected as PHY by the MDIO subsystem core. Seeing the PCS MDIO ID is
known the procedure of the DW XPCS device creation can be simplified by
dropping the loop over all the MDIO IDs. From now the DW XPCS device
descriptor will be created for the MDIO-bus address pre-defined by the
platform drivers via the stmmac_mdio_bus_data::pcs_mask field.
Note besides this shall speed up a bit the Intel mGBE probing.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Fixes: 438ba39b25 ("bnxt_en: Improve RSS context reservation infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use-after-free is actually in rswitch_tx_free(), which is inlined in
rswitch_poll(). Since `skb` and `gq->skbs[gq->dirty]` are in fact the
same pointer, the skb is first freed using dev_kfree_skb_any(), then the
value in skb->len is used to update the interface statistics.
Let's move around the instructions to use skb->len before the skb is
freed.
This bug is trivial to reproduce using KFENCE. It will trigger a splat
every few packets. A simple ARP request or ICMP echo request is enough.
Fixes: 271e015b91 ("net: rswitch: Add unmap_addrs instead of dma address in each desc")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20240702210838.2703228-1-rrendec@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 750011e239 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f70318611 ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The mask parameter of syscfg property is mandatory for MP13 but
optional for all other cases.
The function should not return error code because for non-MP13
the missing syscfg phandle in DT is not considered an error.
So reset err to 0 in that case to support existing DTs without
syscfg phandle.
Fixes: 50bbc03931 ("net: stmmac: dwmac-stm32: add management of stm32mp13 for stm32")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When we want to use clock from RCC to clock Ethernet PHY (with ETHCK)
we need to check if value of clock rate is authorized.
If ETHCK is unused, the ETHCK frequency is 0Hz and validation fails.
It makes no sense to validate unused ETHCK, so skip the validation.
Fixes: 582ac13496 ("net: stmmac: dwmac-stm32: Separate out external clock rate validation")
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
