There are 3 undocumented outputs of the MSSPLL that are used for the CAN
bus, "user crypto" module and eMMC. Add their clock IDs so that they can
be hooked up in DT.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Pull clk updates from Stephen Boyd:
"Only a couple new SoCs have support added this time, primarily for
Qualcomm SM8650 based on the diffstat. Otherwise this is a collection
of non-critical fixes and cleanups to various clk drivers and their DT
bindings.
Nothing is changed in the core clk framework this time, although
there's a patch to fix a basic clk type initialization function. In
general, this pile looks to be on the smaller side.
New Drivers:
- Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650
- Mediatek MT7988 SoC clocks
Updates:
- Update Zynqmp driver for Versal NET platforms
- Add clk driver for Versal clocking wizard IP
- Support for stm32mp25 clks
- Add glitch free PLL setting support to si5351 clk driver
- Add DSI clocks on Amlogic g12/sm1
- Add CSI and ISP clocks on Amlogic g12/sm1
- Document bindings for i.MX93 ANATOP clock driver
- Free clk_node in i.MX SCU driver for resource with different owner
- Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15
- Fix the name of the fvco in i.MX pll14xx by renaming it to fout
- Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC
- Add interrupt controller and Ethernet clocks and resets on Renesas
RZ/G3S
- Check reset monitor registers on Renesas RZ/G2L-alike SoCs
- Reuse reset functionality in the Renesas RZ/G2L clock driver
- Global and RPMh clock support for the Qualcomm X1E80100 SoC
- Support for the Stromer APCS PLL found in Qualcomm IPQ5018
- Add a new type of branch clock, with support for controlling
separate memory control bits, to the Qualcomm clk driver
- Use above new branch type in Qualcomm ECPRI clk driver for QDU1000
and QRU1000
- Add a number of missing clocks related to CSI2 on Qualcomm MSM8939
- Add support for the camera clock controller on Qualcomm SC8280XP
- Correct PLL configuration in GPU and video clock controllers for
Qualcomm SM8150
- Add runtime PM support and a few missing resets to Qualcomm SM8150
video clock controller
- Fix configuration of various GCC GDSCs on Qualcomm SM8550
- Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver
- Fix up GPU and display clock controllers PLL configuration settings
on Qualcomm SM8550
- Cleanup variable init in Allwinner nkm module
- Convert various DT bindings to YAML
- A few kernel-doc fixes for Samsung SoC clock controllers"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: mediatek: add drivers for MT7988 SoC
clk: mediatek: add pcw_chg_bit control for PLLs of MT7988
dt-bindings: clock: mediatek: add clock controllers of MT7988
dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs
dt-bindings: clock: mediatek: add MT7988 clock IDs
clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes
clk: mediatek: clk-mux: Support custom parent indices for muxes
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
clk: imx: pll14xx: change naming of fvco to fout
clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks
clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu()
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config
clk: qcom: dispcc-sm8550: Use the correct PLL configuration function
clk: qcom: dispcc-sm8550: Update disp PLL settings
clk: qcom: gpucc-sm8550: Update GPU PLL settings
...
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
Qualcomm ARM64 updates for v6.8
Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.
On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.
CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.
Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.
MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.
Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.
Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.
UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.
On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.
On SA8775P tsens and thermal is added, as well as the random number
generator.
Sound and RTC support is added for the Acer Aspire 1.
On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.
A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.
On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.
The display subsystem in SDM670 is described.
On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.
On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.
The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.
On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.
GPU and random number generator support are added to SM8450, and enabled
on the HDK board.
On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.
Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.
* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
arm64: dts: qcom: sc8180x: Describe the GIC redistributor
arm64: dts: qcom: sc8180x: Add interconnects to UFS
arm64: dts: qcom: sc8180x: Add missing MDP clocks
arm64: dts: qcom: sc8180x: Add UFS GDSC
arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
arm64: dts: qcom: sc7280: Rename reserved-memory nodes
arm64: dts: qcom: sc7280: Remove unused second MPSS reg
arm64: dts: qcom: sdm670: add display subsystem
arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
arm64: dts: qcom: sm8150: add DisplayPort controller
arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
arm64: dts: qcom: sm8150-hdk: enable HDMI output
arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
arm64: dts: qcom: qcm2290: Hook up MPM
...
Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The gs101 clock defines from the bindings header are derived from the
clock register names found in the datasheet under some certain rules.
The CMU TOP gate clock defines missed to include the required "CMU"
differentiator which will cause collisions with the gate clock defines
of other clock units. Rename the TOP gate clock defines to include "CMU".
Update the clock driver to use the new defines in order to not break
compilation and bisect-ability. There are no device trees that use the
previous defines.
Fixes: 0a910f1606 ("dt-bindings: clock: Add Google gs101 clock management unit bindings")
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Merge SM8650 GCC, TCSRCC, DISPCC, GPUCC and RPMHCC bindings through a
topic branch to make it possible to also merge and use the constants in
the DeviceTree branch.
- Make clk kunit tests work with lockdep
- Fix clk gate kunit test for big-endian
- Convert more than a handful of clk drivers to use regmap maple tree
- Consider the CLK_FRAC_DIVIDER_ZERO_BASED in fractional divider clk
implementation
* clk-renesas: (23 commits)
clk: renesas: r9a08g045: Add clock and reset support for SDHI1 and SDHI2
clk: renesas: rzg2l: Use %x format specifier to print CLK_ON_R()
clk: renesas: Add minimal boot support for RZ/G3S SoC
clk: renesas: rzg2l: Add divider clock for RZ/G3S
clk: renesas: rzg2l: Refactor SD mux driver
clk: renesas: rzg2l: Remove CPG_SDHI_DSEL from generic header
clk: renesas: rzg2l: Add struct clk_hw_data
clk: renesas: rzg2l: Add support for RZ/G3S PLL
clk: renesas: rzg2l: Remove critical area
clk: renesas: rzg2l: Fix computation formula
clk: renesas: rzg2l: Trust value returned by hardware
clk: renesas: rzg2l: Lock around writes to mux register
clk: renesas: rzg2l: Wait for status bit of SD mux before continuing
clk: renesas: rcar-gen3: Extend SDnH divider table
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: renesas: r8a7795: Constify r8a7795_*_clks
clk: renesas: r9a06g032: Name anonymous structs
clk: renesas: r9a06g032: Fix kerneldoc warning
clk: renesas: rzg2l: Use u32 for flag and mux_flags
clk: renesas: rzg2l: Use FIELD_GET() for PLL register fields
...
* clk-kunit:
clk: Fix clk gate kunit test on big-endian CPUs
clk: Parameterize clk_leaf_mux_set_rate_parent
clk: Drive clk_leaf_mux_set_rate_parent test from clk_ops
* clk-regmap:
clk: versaclock7: Convert to use maple tree register cache
clk: versaclock5: Convert to use maple tree register cache
clk: versaclock3: Convert to use maple tree register cache
clk: versaclock3: Remove redundant _is_writeable()
clk: si570: Convert to use maple tree register cache
clk: si544: Convert to use maple tree register cache
clk: si5351: Convert to use maple tree register cache
clk: si5341: Convert to use maple tree register cache
clk: si514: Convert to use maple tree register cache
clk: cdce925: Convert to use maple tree register cache
* clk-frac-divider:
clk: fractional-divider: tests: Add test suite for edge cases
clk: fractional-divider: Improve approximation when zero based and export
- Add consumer info to clk debugfs
- Fix various clk drivers that have clk_hw_onecell_data not at the end
of an allocation
* clk-debugfs:
clk: Allow phase adjustment from debugfs
clk: Show active consumers of clocks in debugfs
* clk-spreadtrum:
clk: sprd: Composite driver support offset config
* clk-sifive:
clk: sifive: Allow building the driver as a module
clk: analogbits: Allow building the library as a module
* clk-counted:
clk: socfpga: agilex: Add bounds-checking coverage for struct stratix10_clock_data
clk: socfpga: Fix undefined behavior bug in struct stratix10_clock_data
clk: visconti: Add bounds-checking coverage for struct visconti_pll_provider
clk: visconti: Fix undefined behavior bug in struct visconti_pll_provider
* clk-qcom: (36 commits)
clk: qcom: apss-ipq6018: add the GPLL0 clock also as clock provider
clk: qcom: ipq5332: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq9574: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq5018: drop the CLK_SET_RATE_PARENT flag from GPLL clocks
clk: qcom: ipq6018: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: ipq8074: drop the CLK_SET_RATE_PARENT flag from PLL clocks
clk: qcom: gcc-ipq6018: add QUP6 I2C clock
clk: qcom: apss-ipq6018: ipq5332: add safe source switch for a53pll
clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config
clk: qcom: apss-ipq-pll: Use stromer plus ops for stromer plus pll
clk: qcom: clk-alpha-pll: introduce stromer plus ops
clk: qcom: config IPQ_APSS_6018 should depend on QCOM_SMEM
clk: qcom: videocc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: gpucc-sm8550: switch to clk_lucid_ole_pll_configure
clk: qcom: Replace of_device.h with explicit includes
clk: qcom: smd-rpm: Move CPUSS_GNoC clock to interconnect
clk: qcom: cbf-msm8996: Convert to platform remove callback returning void
clk: qcom: gcc-sm8150: Fix gcc_sdcc2_apps_clk_src
clk: qcom: Add GCC driver support for SM4450
dt-bindings: clock: qcom: Add GCC clocks for SM4450
...
Add documentation for the RZ/G3S CPG. The RZ/G3S CPG module is almost
identical to the one available in RZ/G2{L,UL}, the exception being some
core clocks as follows:
- The SD clock is composed of a mux and a divider, and the divider
has some limitations (div = 1 cannot be set if mux rate is 800MHz),
- There are 3 SD clocks,
- The OCTA and TSU clocks are specific to RZ/G3S,
- PLL1/4/6 are specific to RZ/G3S with its own computation formula.
Even with this RZ/G3S could use the same bindings as RZ/G2L.
Along with documentation bindings for the RZ/G3S (R9A08G045) Clock Pulse
Generator (CPG) core clocks, module clocks and resets were added.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-13-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
