[ Upstream commit 9960be72a5 ]
In the idle CPU selection logic, attempting cross-node searches adds
unnecessary complexity when CONFIG_NUMA is disabled.
Since there's no meaningful concept of nodes in this case, simplify the
logic by restricting the idle CPU search to the current node only.
Fixes: 48849271e6 ("sched_ext: idle: Per-node idle cpumasks")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86bc9c7424 ]
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1).
Reported-by: syzbot+0903f6d7f285e41cdf10@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/6816e34e.a70a0220.254cdc.002c.GAE@google.com
Fixes: fa9dd599b4 ("bpf: get rid of pure_initcall dependency to enable jits")
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Link: https://lore.kernel.org/r/20250526133358.2594176-1-mannkafai@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e2e6841ff ]
This reverts commit 4a8f635a60.
Althought get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), the find_vpid() was not.
The documentation for find_vpid() clearly states:
"Must be called with the tasklist_lock or rcu_read_lock() held."
Add proper rcu_read_lock/unlock() to protect the find_vpid().
Fixes: 4a8f635a60 ("bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic")
Reported-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Di Shen <di.shen@unisoc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250520054943.5002-1-xuewen.yan@unisoc.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2947c4b7d ]
The function event_trigger_alloc() creates an event_trigger_data
descriptor and states that it needs to be freed via event_trigger_free().
This is incorrect, it needs to be freed by trigger_data_free() as
event_trigger_free() adds ref counting.
Rename event_trigger_alloc() to trigger_data_alloc() and state that it
needs to be freed via trigger_data_free(). This naming convention
was introducing bugs.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.776436410@goodmis.org
Fixes: 86599dbe2c ("tracing: Add helper functions to simplify event_command.parse() callback handling")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ab0fc61ce ]
The histogram trigger has three somewhat large arrays on the kernel stack:
unsigned long entries[HIST_STACKTRACE_DEPTH];
u64 var_ref_vals[TRACING_MAP_VARS_MAX];
char compound_key[HIST_KEY_SIZE_MAX];
Checking the function event_hist_trigger() stack frame size, it currently
uses 816 bytes for its stack frame due to these variables!
Instead, allocate a per CPU structure that holds these arrays for each
context level (normal, softirq, irq and NMI). That is, each CPU will have
4 of these structures. This will be allocated when the first histogram
trigger is enabled and freed when the last is disabled. When the
histogram callback triggers, it will request this structure. The request
will disable preemption, get the per CPU structure at the index of the
per CPU variable, and increment that variable.
The callback will use the arrays in this structure to perform its work and
then release the structure. That in turn will simply decrement the per CPU
index and enable preemption.
Moving the variables from the kernel stack to the per CPU structure brings
the stack frame of event_hist_trigger() down to just 112 bytes.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250407123851.74ea8d58@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 714070c4cb ]
In the current implementation if the program is dev-bound to a specific
device, it will not be possible to perform XDP_REDIRECT into a DEVMAP
or CPUMAP even if the program is running in the driver NAPI context and
it is not attached to any map entry. This seems in contrast with the
explanation available in bpf_prog_map_compatible routine.
Fix the issue introducing __bpf_prog_map_compatible utility routine in
order to avoid bpf_prog_is_dev_bound() check running bpf_check_tail_call()
at program load time (bpf_prog_select_runtime()).
Continue forbidding to attach a dev-bound program to XDP maps
(BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_CPUMAP).
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b17d4525b ]
Commit cdb8c100d8 ("include/linux/suspend.h: Only show pm_pr_dbg
messages at suspend/resume") caused PM debug messages to only be
printed during system-wide suspend and resume in progress, but it
forgot about hibernation.
Address this by adding a check for hibernation in progress to
pm_debug_messages_should_print().
Fixes: cdb8c100d8 ("include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4998903.GXAFRqVoOG@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 179c0c7044 ]
When the device is of a non-CPU type, table[i].performance won't be
initialized in the previous em_init_performance(), resulting in division
by zero when calculating costs in em_compute_costs().
Since the 'cost' algorithm is only used for EAS energy efficiency
calculations and is currently not utilized by other device drivers, we
should add the _is_cpu_device(dev) check to prevent this division-by-zero
issue.
Fixes: 1b600da510 ("PM: EM: Optimize em_cpu_energy() and remove division")
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/tencent_7F99ED4767C1AF7889D0D8AD50F34859CE06@qq.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa3ee4f0b7 ]
Delayed dequeued feature keeps a sleeping task enqueued until its
lag has elapsed. As a result, it stays also visible in rq->nr_running.
So when in wake_affine_idle(), we should use the real running-tasks
in rq to check whether we should place the wake-up task to
current cpu.
On the other hand, add a helper function to return the nr-delayed.
Fixes: 152e11f6df ("sched/fair: Implement delayed dequeue")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250303105241.17251-2-xuewen.yan@unisoc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ca5743a2 ]
It was reported that in 6.12, smpboot_create_threads() was
taking much longer then in 6.6.
I narrowed down the call path to:
smpboot_create_threads()
-> kthread_create_on_cpu()
-> kthread_bind()
-> __kthread_bind_mask()
->wait_task_inactive()
Where in wait_task_inactive() we were regularly hitting the
queued case, which sets a 1 tick timeout, which when called
multiple times in a row, accumulates quickly into a long
delay.
I noticed disabling the DELAY_DEQUEUE sched feature recovered
the performance, and it seems the newly create tasks are usually
sched_delayed and left on the runqueue.
So in wait_task_inactive() when we see the task
p->se.sched_delayed, manually dequeue the sched_delayed task
with DEQUEUE_DELAYED, so we don't have to constantly wait a
tick.
Fixes: 152e11f6df ("sched/fair: Implement delayed dequeue")
Reported-by: peter-yc.chang@mediatek.com
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lkml.kernel.org/r/20250429150736.3778580-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f51972e6f8 ]
According to the throttling mechanism, the pmu interrupts number can not
exceed the max_samples_per_tick in one tick. But this mechanism is
ineffective when max_samples_per_tick=1, because the throttling check is
skipped during the first interrupt and only performed when the second
interrupt arrives.
Perhaps this bug may cause little influence in one tick, but if in a
larger time scale, the problem can not be underestimated.
When max_samples_per_tick = 1:
Allowed-interrupts-per-second max-samples-per-second default-HZ ARCH
200 100 100 X86
500 250 250 ARM64
...
Obviously, the pmu interrupt number far exceed the user's expect.
Fixes: e050e3f0a7 ("perf: Fix broken interrupt rate throttling")
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250405141635.243786-3-wangqing7171@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8feb053d53 ]
Gabriele noted that in case of signal_pending_state(), the tracepoint
sees a stale task-state.
Fixes: fa2c3254d7 ("sched/tracing: Don't re-read p->state when emitting sched_switch event")
Reported-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2fbdb6d8e0 upstream.
On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.
Compilation warning details:
kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
...
kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
min((size_t)trace_seq_used(&iter->seq),
^~~
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com
Fixes: f5178c41bb ("tracing: Fix oob write in trace_seq_to_buffer()")
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Pan Taixi <pantaixi@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull hotfixes from Andrew Morton:
"22 hotfixes.
13 are cc:stable and the remainder address post-6.14 issues or aren't
considered necessary for -stable kernels. 19 are for MM"
* tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mailmap: add Jarkko's employer email address
mm: fix copy_vma() error handling for hugetlb mappings
memcg: always call cond_resched() after fn()
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
mm: vmalloc: only zero-init on vrealloc shrink
mm: vmalloc: actually use the in-place vrealloc region
alloc_tag: allocate percpu counters for module tags dynamically
module: release codetag section when module load fails
mm/cma: make detection of highmem_start more robust
MAINTAINERS: add mm memory policy section
MAINTAINERS: add mm ksm section
kasan: avoid sleepable page allocation from atomic context
highmem: add folio_test_partial_kmap()
MAINTAINERS: add hung-task detector section
taskstats: fix struct taskstats breaks backward compatibility since version 15
mm/truncate: fix out-of-bounds when doing a right-aligned split
MAINTAINERS: add mm reclaim section
MAINTAINERS: update page allocator section
mm: fix VM_UFFD_MINOR == VM_SHADOW_STACK on USERFAULTFD=y && ARM64_GCS=y
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled
...
Pull crypto fixes from Herbert Xu:
"This fixes a regression in padata as well as an ancient double-free
bug in af_alg"
* tag 'v6.15-p7' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - fix double free in hash_accept
padata: do not leak refcount in reorder_work
A recent patch that addressed a UAF introduced a reference count leak:
the parallel_data refcount is incremented unconditionally, regardless
of the return value of queue_work(). If the work item is already queued,
the incremented refcount is never decremented.
Fix this by checking the return value of queue_work() and decrementing
the refcount when necessary.
Resolves:
Unreferenced object 0xffff9d9f421e3d80 (size 192):
comm "cryptomgr_probe", pid 157, jiffies 4294694003
hex dump (first 32 bytes):
80 8b cf 41 9f 9d ff ff b8 97 e0 89 ff ff ff ff ...A............
d0 97 e0 89 ff ff ff ff 19 00 00 00 1f 88 23 00 ..............#.
backtrace (crc 838fb36):
__kmalloc_cache_noprof+0x284/0x320
padata_alloc_pd+0x20/0x1e0
padata_alloc_shell+0x3b/0xa0
0xffffffffc040a54d
cryptomgr_probe+0x43/0xc0
kthread+0xf6/0x1f0
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
Fixes: dd7d37ccf6 ("padata: avoid UAF for reorder_work")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominik Grzegorzek <dominik.grzegorzek@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
Pull Kbuild fixes from Masahiro Yamada:
- Add proper pahole version dependency to CONFIG_GENDWARFKSYMS to avoid
module loading errors
- Fix UAPI header tests for the OpenRISC architecture
- Add dependency on the libdw package in Debian and RPM packages
- Disable -Wdefault-const-init-unsafe warnings on Clang
- Make "make clean ARCH=um" also clean the arch/x86/ directory
- Revert the use of -fmacro-prefix-map=, which causes issues with
debugger usability
* tag 'kbuild-fixes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "module.builtin" to "modules.builtin"
Revert "kbuild, rust: use -fremap-path-prefix to make paths relative"
Revert "kbuild: make all file references relative to source root"
kbuild: fix dependency on sorttable
init: remove unused CONFIG_CC_CAN_LINK_STATIC
um: let 'make clean' properly clean underlying SUBARCH as well
kbuild: Disable -Wdefault-const-init-unsafe
kbuild: rpm-pkg: Add (elfutils-devel or libdw-devel) to BuildRequires
kbuild: deb-pkg: Add libdw-dev:native to Build-Depends-Arch
usr/include: openrisc: don't HDRTEST bpf_perf_event.h
kbuild: Require pahole <v1.28 or >v1.29 with GENDWARFKSYMS on X86
Pull tracing fixes from Steven Rostedt:
- Fix sample code that uses trace_array_printk()
The sample code for in kernel use of trace_array (that creates an
instance for use within the kernel) and shows how to use
trace_array_printk() that writes into the created instance, used
trace_printk_init_buffers(). But that function is used to initialize
normal trace_printk() and produces the NOTICE banner which is not
needed for use of trace_array_printk(). The function to initialize
that is trace_array_init_printk() that takes the created trace array
instance as a parameter.
Update the sample code to reflect the proper usage.
- Fix preemption count output for stacktrace event
The tracing buffer shows the preempt count level when an event
executes. Because writing the event itself disables preemption, this
needs to be accounted for when recording. The stacktrace event did
not account for this so the output of the stacktrace event showed
preemption was disabled while the event that triggered the stacktrace
shows preemption is enabled and this leads to confusion. Account for
preemption being disabled for the stacktrace event.
The same happened for stack traces triggered by function tracer.
- Fix persistent ring buffer when trace_pipe is used
The ring buffer swaps the reader page with the next page to read from
the write buffer when trace_pipe is used. If there's only a page of
data in the ring buffer, this swap will cause the "commit" pointer
(last data written) to be on the reader page. If more data is written
to the buffer, it is added to the reader page until it falls off back
into the write buffer.
If the system reboots and the commit pointer is still on the reader
page, even if new data was written, the persistent buffer validator
will miss finding the commit pointer because it only checks the write
buffer and does not check the reader page. This causes the validator
to fail the validation and clear the buffer, where the new data is
lost.
There was a check for this, but it checked the "head pointer", which
was incorrect, because the "head pointer" always stays on the write
buffer and is the next page to swap out for the reader page. Fix the
logic to catch this case and allow the user to still read the data
after reboot.
* tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix persistent buffer when commit page is the reader page
ftrace: Fix preemption accounting for stacktrace filter command
ftrace: Fix preemption accounting for stacktrace trigger command
tracing: samples: Initialize trace_array_printk() with the correct function
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b0 ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull probes fixes from Masami Hiramatsu:
- fprobe: Fix RCU warning message in list traversal
fprobe_module_callback() using hlist_for_each_entry_rcu() traverse
the fprobe list but it locks fprobe_mutex() instead of rcu lock
because it is enough. So add lockdep_is_held() to avoid warning.
- tracing: eprobe: Add missing trace_probe_log_clear for eprobe
__trace_eprobe_create() uses trace_probe_log but forgot to clear it
at exit. Add trace_probe_log_clear() calls.
- tracing: probes: Fix possible race in trace_probe_log APIs
trace_probe_log APIs are used in probe event (dynamic_events,
kprobe_events and uprobe_events) creation. Only dynamic_events uses
the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and
uprobe events to lock the same mutex to serialize its creation to
avoid race in trace_probe_log APIs.
* tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix a possible race in trace_probe_log APIs
tracing: add missing trace_probe_log_clear for eprobes
tracing: fprobe: Fix RCU warning message in list traversal
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb8 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull sched_ext fixes from Tejun Heo:
"A little bit invasive for rc6 but they're important fixes, pass tests
fine and won't break anything outside sched_ext:
- scx_bpf_cpuperf_set() calls internal functions that require the rq
to be locked. It assumed that the BPF caller has rq locked but
that's not always true. Fix it by tracking whether rq is currently
held by the CPU and grabbing it if necessary
- bpf_iter_scx_dsq_new() was leaving the DSQ iterator in an
uninitialized state after an error. However, next() and destroy()
can be called on an iterator which failed initialization and thus
they always need to be initialized even after an init error. Fix by
always initializing the iterator
- Remove duplicate BTF_ID_FLAGS() entries"
* tag 'sched_ext-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
sched_ext: Fix rq lock state in hotplug ops
sched_ext: Remove duplicate BTF_ID_FLAGS definitions
sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()
sched_ext: Track currently locked rq
Pull cgroup fix from Tejun Heo:
"One low-risk patch to fix a cpuset bug where it over-eagerly tries to
modify CPU affinity of kernel threads"
* tag 'cgroup-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Extend kthread_is_per_cpu() check to all PF_NO_SETAFFINITY tasks
With CONFIG_GENDWARFKSYMS, __gendwarfksyms_ptr variables are
added to the kernel in EXPORT_SYMBOL() to ensure DWARF type
information is available for exported symbols in the TUs where
they're actually exported. These symbols are dropped when linking
vmlinux, but dangling references to them remain in DWARF.
With CONFIG_DEBUG_INFO_BTF enabled on X86, pahole versions after
commit 47dcb534e253 ("btf_encoder: Stop indexing symbols for
VARs") and before commit 9810758003ce ("btf_encoder: Verify 0
address DWARF variables are in ELF section") place these symbols
in the .data..percpu section, which results in an "Invalid
offset" error in btf_datasec_check_meta() during boot, as all
the variables are at zero offset and have non-zero size. If
CONFIG_DEBUG_INFO_BTF_MODULES is enabled, this also results in a
failure to load modules with:
failed to validate module [$module] BTF: -22
As the issue occurs in pahole v1.28 and the fix was merged
after v1.29 was released, require pahole <v1.28 or >v1.29 when
GENDWARFKSYMS is enabled with DEBUG_INFO_BTF on X86.
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Not intuitive, but vm_area_dup() located in kernel/fork.c is not only used
for duplicating VMAs during fork(), but also for duplicating VMAs when
splitting VMAs or when mremap()'ing them.
VM_PFNMAP mappings can at least get ordinarily mremap()'ed (no change in
size) and apparently also shrunk during mremap(), which implies
duplicating the VMA in __split_vma() first.
In case of ordinary mremap() (no change in size), we first duplicate the
VMA in copy_vma_and_data()->copy_vma() to then call untrack_pfn_clear() on
the old VMA: we effectively move the VM_PAT reservation. So the
untrack_pfn_clear() call on the new VMA duplicating is wrong in that
context.
Splitting of VMAs seems problematic, because we don't duplicate/adjust the
reservation when splitting the VMA. Instead, in memtype_erase() -- called
during zapping/munmap -- we shrink a reservation in case only the end
address matches: Assume we split a VMA into A and B, both would share a
reservation until B is unmapped.
So when unmapping B, the reservation would be updated to cover only A.
When unmapping A, we would properly remove the now-shrunk reservation.
That scenario describes the mremap() shrinking (old_size > new_size),
where we split + unmap B, and the untrack_pfn_clear() on the new VMA when
is wrong.
What if we manage to split a VM_PFNMAP VMA into A and B and unmap A first?
It would be broken because we would never free the reservation. Likely,
there are ways to trigger such a VMA split outside of mremap().
Affecting other VMA duplication was not intended, vm_area_dup() being used
outside of kernel/fork.c was an oversight. So let's fix that for; how to
handle VMA splits better should be investigated separately.
With a simple reproducer that uses mprotect() to split such a VMA I can
trigger
x86/PAT: pat_mremap:26448 freeing invalid memtype [mem 0x00000000-0x00000fff]
Link: https://lkml.kernel.org/r/20250422144942.2871395-1-david@redhat.com
Fixes: dc84bc2aba ("x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull misc timers fixes from Ingo Molnar:
- Fix time keeping bugs in CLOCK_MONOTONIC_COARSE clocks
- Work around absolute relocations into vDSO code that GCC erroneously
emits in certain arm64 build environments
- Fix a false positive lockdep warning in the i8253 clocksource driver
* tag 'timers-urgent-2025-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/i8253: Use raw_spinlock_irqsave() in clockevent_i8253_disable()
arm64: vdso: Work around invalid absolute relocations from GCC
timekeeping: Prevent coarse clocks going backwards
When CONFIG_PROVE_RCU_LIST is enabled, fprobe triggers the following
warning:
WARNING: suspicious RCU usage
kernel/trace/fprobe.c:457 RCU-list traversed in non-reader section!!
other info that might help us debug this:
#1: ffffffff863c4e08 (fprobe_mutex){+.+.}-{4:4}, at: fprobe_module_callback+0x7b/0x8c0
Call Trace:
fprobe_module_callback
notifier_call_chain
blocking_notifier_call_chain
This warning occurs because fprobe_remove_node_in_module() traverses an
RCU list using RCU primitives without holding an RCU read lock. However,
the function is only called from fprobe_module_callback(), which holds
the fprobe_mutex lock that provides sufficient protection for safely
traversing the list.
Fix the warning by specifying the locking design to the
CONFIG_PROVE_RCU_LIST mechanism. Add the lockdep_is_held() argument to
hlist_for_each_entry_rcu() to inform the RCU checker that fprobe_mutex
provides the required protection.
Link: https://lore.kernel.org/all/20250410-fprobe-v1-1-068ef5f41436@debian.org/
Fixes: a3dc2983ca ("tracing: fprobe: Cleanup fprobe hash when module unloading")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Antonio Quartulli <antonio@mandelbit.com>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Commit ec5fbdfb99 ("cgroup/cpuset: Enable update_tasks_cpumask()
on top_cpuset") enabled us to pull CPUs dedicated to child partitions
from tasks in top_cpuset by ignoring per cpu kthreads. However, there
can be other kthreads that are not per cpu but have PF_NO_SETAFFINITY
flag set to indicate that we shouldn't mess with their CPU affinity.
For other kthreads, their affinity will be changed to skip CPUs dedicated
to child partitions whether it is an isolating or a scheduling one.
As all the per cpu kthreads have PF_NO_SETAFFINITY set, the
PF_NO_SETAFFINITY tasks are essentially a superset of per cpu kthreads.
Fix this issue by dropping the kthread_is_per_cpu() check and checking
the PF_NO_SETAFFINITY flag instead.
Fixes: ec5fbdfb99 ("cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
BPF programs may call next() and destroy() on BPF iterators even after new()
returns an error value (e.g. bpf_for_each() macro ignores error returns from
new()). bpf_iter_scx_dsq_new() could leave the iterator in an uninitialized
state after an error return causing bpf_iter_scx_dsq_next() to dereference
garbage data. Make bpf_iter_scx_dsq_new() always clear $kit->dsq so that
next() and destroy() become noops.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 650ba21b13 ("sched_ext: Implement DSQ iterator")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
Pull irq fixes from Ingo Molnar:
- Prevent NULL pointer dereference in msi_domain_debug_show()
- Fix crash in the qcom-mpm irqchip driver when configuring
interrupts for non-wake GPIOs
* tag 'irq-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
genirq/msi: Prevent NULL pointer dereference in msi_domain_debug_show()
The function trace_adjust_address() is used to map addresses of modules
stored in the persistent memory and are also loaded in the current boot to
return the current address for the module.
If there's only one module entry, it will simply use that, otherwise it
performs a bsearch of the entry array to find the modules to offset with.
The issue is if there are no modules in the array. The code does not
account for that and ends up referencing the first element in the array
which does not exist and causes a crash.
If nr_entries is zero, exit out early as if this was a core kernel
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250501151909.65910359@gandalf.local.home
Fixes: 35a380ddbc ("tracing: Show last module text symbols in the stacktrace")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.
Link: https://lore.kernel.org/20250422113026.13308-1-aha310510@gmail.com
Reported-by: syzbot+c8cd2d2c412b868263fb@syzkaller.appspotmail.com
Fixes: 3c56819b14 ("tracing: splice support for tracing_pipe")
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
irq_domain_debug_show_one() calls msi_domain_debug_show() with a non-NULL
domain pointer and a NULL irq_data pointer. irq_debug_show_data() calls it
with a NULL domain pointer.
The domain pointer is not used, but the irq_data pointer is required to be
non-NULL and lacks a NULL pointer check.
Add the missing NULL pointer check to ensure there is a non-NULL irq_data
pointer in msi_domain_debug_show() before dereferencing it.
[ tglx: Massaged change log ]
Fixes: 01499ae673 ("genirq/msi: Expose MSI message data in debugfs")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250430124836.49964-2-ajones@ventanamicro.com
Pull modules fixes from Petr Pavlu:
"A single series to properly handle the module_kobject creation.
This fixes a problem with missing /sys/module/<module>/drivers for
built-in modules"
* tag 'modules-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
drivers: base: handle module_kobject creation
kernel: globalize lookup_or_create_module_kobject()
kernel: refactor lookup_or_create_module_kobject()
kernel: param: rename locate_module_kobject
