Add a soft IH ring implementation similar to the hardware IH1/2.
This can be used if the hardware delegation of interrupts to IH1/2
doesn't work for some reason.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a break statement instead of letting
the code fall through to the next case, and a fallthrough pseudo-keyword
as a replacement for a /* fall through */ comment,
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple fallthrough pseudo-keyword macros,
as replacement for /* fall through */ comments.
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix check_patch.pl warning:
WARNING: Prefer kmalloc_array over kmalloc with multiply
+bps = kmalloc(align_space * sizeof((*data)->bps), GFP_KERNEL);
WARNING: Prefer kmalloc_array over kmalloc with multiply
+bps_bo = kmalloc(align_space * sizeof((*data)->bps_bo),
GFP_KERNEL);
kmalloc_array has multiply overflow check, which will be safer.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix check_patch.pl warning:
kmalloc_array uses number as first arg, sizeof is generally wrong.
+fences = kmalloc_array(sizeof(void *), id_mgr->num_ids,
GFP_KERNEL);
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Default runtime logic not changed.
Provide an alternative runtime method. (set 1 to use BACO; 2 to use BAMACO)
When set reset_method to 4, it will use BACO or BAMACO for gpu reset,
according to runpm value.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some features are still disabled after runtime pm resume. This can take
the hardware back.
Unlike other projects, this doesn't need pptable retransfer.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This has been confirmed that unload message is not needed from SIENNA_CICHLID in reset.
Otherwise it will cause the fw wrong state after reset and no response for any messages.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get rid of the __call_single_node union and clean up the API a little
to avoid external code relying on the structure layout as much.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Flushing the fbdev's shadow buffer requires vmap'ing the BO memory, which
in turn requires pinning the BO. While being pinned, the BO cannot be moved
into VRAM for scanout. Consequently, a concurrent modeset operation that
involves the fbdev framebuffer would likely fail.
Resolve this problem be acquiring the modeset lock of the planes that use
the fbdev framebuffer. On non-atomic drivers, also acquire the mode-config
lock. This serializes the flushing of the framebuffer with concurrent
modeset operations.
v2:
* only acquire struct drm_fb_helper.lock in damage blitter (Daniel,
Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-11-tzimmermann@suse.de
DRM client's vmap/vunmap functions don't allow for multiple vmap
operations. Calling drm_client_buffer_vmap() twice returns the same
mapping, then calling drm_client_buffer_vunmap() twice already unmaps
on the first call. This leads to unbalanced vmap refcounts. Fix this
by calling drm_gem_vmap() unconditionally in drm_client_buffer_vmap().
All drivers that support DRM clients have to implement correct ref-
counting for their vmap operations, or not vunmap at all. This is the
case for drivers that use CMA, SHMEM and VRAM helpers, and QXL. Other
drivers are not affected.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201120102545.4047-4-tzimmermann@suse.de
SHMEM-buffer backing storage is allocated from system memory; which is
typically cachable. The default mode for SHMEM objects is writecombine
though.
Unify SHMEM semantics by defaulting to cached mappings. The exception
is pages imported via dma-buf. DMA memory is usually not cached.
DRM drivers that require write-combined mappings set the map_wc flag
in struct drm_gem_shmem_object to true. This currently affects lima,
panfrost and v3d.
The drivers mgag200, udl, virtio and vkms continue to use default
shmem mappings.
The drivers cirrus and gm12u320 change caching flags. Both used
writecombine and now switch over to shmem defaults. Both drivers use
SHMEM objects as shadow buffers for internal video memory, so cached
mappings will not affect them negatively.
v3:
* set value of shmem pointer before dereferencing it in
__drm_gem_shmem_create() (Dan, kernel test robot)
v2:
* recreate patch on top of latest SHMEM helpers
* update lima, panfrost, v3d to select writecombine (Daniel, Rob)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117133156.26822-2-tzimmermann@suse.de
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_mode_set’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:981:31: warning: variable ‘num_dspp’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:976:30: warning: variable ‘topology’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘_dpu_encoder_virt_enable_helper’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1099:26: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c: In function ‘dpu_encoder_virt_disable’:
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:1210:18: warning: variable ‘dpu_kms’ set but not used [-Wunused-but-set-variable]
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
