Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
mpi3mr).
The main driver change that might cause issues on down the road is the
conversion of some of our oldest surviving drivers to the DMA API
(should only affect m68k).
The only major core change is the rework of async resume; the rest are
either completely trivial or for updating deprecated APIs"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
scsi: target: Remove XDWRITEREAD emulated support
scsi: megaraid: Remove the static variable initialisation
scsi: ch: Do not initialise statics to 0
scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
scsi: target: iscsi: Do not require target authentication
scsi: target: iscsi: Allow AuthMethod=None
scsi: target: iscsi: Support base64 in CHAP
scsi: target: iscsi: Add support for extended CDB AHS
scsi: ufs: dt-bindings: Add SC8280XP binding
scsi: target: iscsi: Fix clang -Wformat warnings
scsi: ufs: core: Read device property for ref clock
scsi: libsas: Resume SAS host for phy reset or enable via sysfs
scsi: hisi_sas: Modify v3 HW SATA completion error processing
scsi: hisi_sas: Relocate DMA unmap of SMP task
scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
scsi: mpi3mr: Delete a stray tab
scsi: mpi3mr: Unlock on error path
scsi: mpi3mr: Reduce VD queue depth on detecting throttling
scsi: mpi3mr: Resource Based Metering
...
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
After ufshcd_wl_shutdown() set device power off and link off,
ufshcd_shutdown() could turn off clock/power. Also remove
pm_runtime_get_sync.
The reason why it is safe to remove pm_runtime_get_sync() is because:
- ufshcd_wl_shutdown() -> pm_runtime_get_sync() will resume hba->dev too.
- device resume(turn on clk/power) is not required, even if device is in
RPM_SUSPENDED.
Link: https://lore.kernel.org/r/20220727030526.31022-1-peter.wang@mediatek.com
Fixes: b294ff3e34 ("scsi: ufs: core: Enable power management for wlun")
Cc: <stable@vger.kernel.org> # 5.15.x
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Measurements for one particular UFS controller + UFS device show a 25%
higher read bandwidth if the maximum data buffer size is increased from 512
KiB to 1 MiB. Hence increase the maximum size of the data buffer associated
with a single request from SCSI_DEFAULT_MAX_SECTORS (1024) * 512 bytes =
512 KiB to 1 MiB.
Notes:
- The maximum data buffer size supported by the UFSHCI specification
is 65535 * 256 KiB or about 16 GiB.
- The maximum data buffer size for READ(10) commands is 65535 logical
blocks. To transfer more than 65535 * 4096 bytes = 255 MiB with a single
SCSI command, the READ(16) command is required. Support for READ(16) is
optional in the UFS 3.1 and UFS 4.0 standards.
Link: https://lore.kernel.org/r/20220726225232.1362251-1-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a device management command completion happens after
wait_for_completion_timeout() times out and before ufshcd_clear_cmds() is
called, then the completion code may crash on the complete() call in
__ufshcd_transfer_req_compl().
Fix the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Call trace:
complete+0x64/0x178
__ufshcd_transfer_req_compl+0x30c/0x9c0
ufshcd_poll+0xf0/0x208
ufshcd_sl_intr+0xb8/0xf0
ufshcd_intr+0x168/0x2f4
__handle_irq_event_percpu+0xa0/0x30c
handle_irq_event+0x84/0x178
handle_fasteoi_irq+0x150/0x2e8
__handle_domain_irq+0x114/0x1e4
gic_handle_irq.31846+0x58/0x300
el1_irq+0xe4/0x1c0
efi_header_end+0x110/0x680
__irq_exit_rcu+0x108/0x124
__handle_domain_irq+0x118/0x1e4
gic_handle_irq.31846+0x58/0x300
el1_irq+0xe4/0x1c0
cpuidle_enter_state+0x3ac/0x8c4
do_idle+0x2fc/0x55c
cpu_startup_entry+0x84/0x90
kernel_init+0x0/0x310
start_kernel+0x0/0x608
start_kernel+0x4ec/0x608
Link: https://lore.kernel.org/r/20220720170228.1598842-1-bvanassche@acm.org
Fixes: 5a0b0cb9be ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS storage devices require bRefClkFreq attribute to be set to operate
correctly at high speed mode. The necessary value is determined by what the
SoC / board supports. The standard doesn't specify a method to query the
value, so the information needs to be fed in separately.
DT information feeds into setting up the clock framework, so platforms
using DT can get the UFS reference clock frequency from the clock
framework. A special node "ref_clk" from the clock array for the UFS
controller node is used as the source for the information.
On the platforms that do not use DT (e.g. Intel), the alternative mechanism
to feed the intended reference clock frequency is necessary. Specifying the
necessary information in DSD of the UFS controller ACPI node is an
alternative mechanism proposed in this patch. Those can be accessed via
firmware property facility in the kernel and in many ways simillar to
querying properties defined in DT.
This patch introduces a small helper function to query a predetermined ACPI
supplied property of the UFS controller, and uses it to attempt retrieving
reference clock value, unless that was already done by the clock
infrastructure.
Link: https://lore.kernel.org/r/20220715210230.1.I365d113d275117dee8fd055ce4fc7e6aebd0bce9@changeid
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Daniil Lunev <dlunev@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The type name enum req_opf is misleading since it suggests that values of
this type include both an operation type and flags. Since values of this
type represent an operation only, change the type name into enum req_op.
Convert the enum req_op documentation into kernel-doc format. Move a few
definitions such that the enum req_op documentation occurs just above
the enum req_op definition.
The name "req_opf" was introduced by commit ef295ecf09 ("block: better op
and flags encoding").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-2-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix build warnings:
1.
../drivers/ufs/host/ufs-mediatek.c:1375:5: error: no previous prototype for function 'ufs_mtk_system_suspend' [-Werror,-Wmissing-prototypes]
int ufs_mtk_system_suspend(struct device *dev)
^
../drivers/ufs/host/ufs-mediatek.c:1375:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int ufs_mtk_system_suspend(struct device *dev)
^
static
2.
../drivers/ufs/host/ufs-mediatek.c:702:50: error: format specifies type 'unsigned long' but the argument has type 'int' [-Werror,-Wformat]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-ufs%lu", ver);
~~~ ^~~
%d
Link: https://lore.kernel.org/r/20220623035052.18802-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If CONFIG_PM_SLEEP is not set.
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu-, will fail:
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_vreg_fix_vcc’:
drivers/ufs/host/ufs-mediatek.c:688:46: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ [-Wformat=]
snprintf(vcc_name, MAX_VCC_NAME, "vcc-opt%u", res.a1);
~^ ~~~~~~
%lu
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_suspend’:
drivers/ufs/host/ufs-mediatek.c:1371:8: error: implicit declaration of function ‘ufshcd_system_suspend’; did you mean ‘ufs_mtk_system_suspend’? [-Werror=implicit-function-declaration]
ret = ufshcd_system_suspend(dev);
^~~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_suspend
drivers/ufs/host/ufs-mediatek.c: In function ‘ufs_mtk_system_resume’:
drivers/ufs/host/ufs-mediatek.c:1386:9: error: implicit declaration of function ‘ufshcd_system_resume’; did you mean ‘ufs_mtk_system_resume’? [-Werror=implicit-function-declaration]
return ufshcd_system_resume(dev);
^~~~~~~~~~~~~~~~~~~~
ufs_mtk_system_resume
cc1: some warnings being treated as errors
The declaration of func "ufshcd_system_suspend()" depends on
CONFIG_PM_SLEEP, so the function wrapper ufs_mtk_system_suspend() should
wrapped by CONFIG_PM_SLEEP too.
Link: https://lore.kernel.org/r/20220619115432.205504-1-renzhijie2@huawei.com
Fixes: 3fd23b8dfb ("scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulators")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prevent that both the interrupt handler and the reset handler try to
complete a request at the same time. This patch is the result of an
analysis of the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE 5.10.107-android13-4-00051-g1e48e8970cca-ab8664745 #1
pc : ufshcd_release_scsi_cmd+0x30/0x46c
lr : __ufshcd_transfer_req_compl+0x4fc/0x9c0
Call trace:
ufshcd_release_scsi_cmd+0x30/0x46c
__ufshcd_transfer_req_compl+0x4fc/0x9c0
ufshcd_poll+0xf0/0x208
ufshcd_sl_intr+0xb8/0xf0
ufshcd_intr+0x168/0x2f4
__handle_irq_event_percpu+0xa0/0x30c
handle_irq_event+0x84/0x178
handle_fasteoi_irq+0x150/0x2e8
__handle_domain_irq+0x114/0x1e4
gic_handle_irq.31846+0x58/0x300
el1_irq+0xe4/0x1c0
cpuidle_enter_state+0x3ac/0x8c4
do_idle+0x2fc/0x55c
cpu_startup_entry+0x84/0x90
kernel_init+0x0/0x310
start_kernel+0x0/0x608
start_kernel+0x4ec/0x608
Link: https://lore.kernel.org/r/20220613214442.212466-4-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
