Commit 3752e453f6 ("selftests/powerpc: Add tests of PMU EBBs") added
selftest testcases to verify EBB interface. instruction_count_test.c
testcase needs a fixed loop function to count overhead. Instead of using
the thirty_two_instruction_loop() in fixed_instruction_loop.S in ebb
folder, file is linked with thirty_two_instruction_loop() in loop.S from
top folder. Since fixed_instruction_loop.S not used, patch removes the
file.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220322045638.10443-1-maddy@linux.ibm.com
In commit f3054ffd71 ("selftests/powerpc: Return skip code for
spectre_v2"), the spectre_v2 selftest is updated to be aware of cases
where the vulnerability status reported in sysfs is incorrect, skipping
the test instead.
This happens because qemu can misrepresent the mitigation status of the
host to the guest. If the count cache is disabled in the host, and this
is correctly reported to the guest, then the guest won't apply
mitigations. If the guest is then migrated to a new host where
mitigations are necessary, it is now vulnerable because it has not
applied mitigations.
Update the selftest to report when we see excessive misses, indicative of
the count cache being disabled. If software flushing is enabled, also
warn that these flushes are just wasting performance.
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rebase and update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608064809.199116-1-ruscur@russell.cc
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly expose GICv3 support even if no irqchip is created so
that userspace doesn't observe it changing pointlessly (fixing a
regression with QEMU)
- Don't issue a hypercall to set the id-mapped vectors when protected
mode is enabled (fix for pKVM in combination with CPUs affected by
Spectre-v3a)
x86 (five oneliners, of which the most interesting two are):
- a NULL pointer dereference on INVPCID executed with paging
disabled, but only if KVM is using shadow paging
- an incorrect bsearch comparison function which could truncate the
result and apply PMU event filtering incorrectly. This one comes
with a selftests update too"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
KVM: x86: hyper-v: fix type of valid_bank_mask
KVM: Free new dirty bitmap if creating a new memslot fails
KVM: eventfd: Fix false positive RCU usage warning
selftests: kvm/x86: Verify the pmu event filter matches the correct event
selftests: kvm/x86: Add the helper function create_pmu_event_filter
kvm: x86/pmu: Fix the compare function used by the pmu event filter
KVM: arm64: Don't hypercall before EL2 init
KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GIC
KVM: x86/mmu: Update number of zapped pages even if page list is stable
tests load/attach bpf prog with maps, perfbuf and ringbuf, pinning
them. Then effective caps are dropped and we verify we can
- pick up the pin
- create ringbuf/perfbuf
- get ringbuf/perfbuf events, carry out map update, lookup and delete
- create a link
Negative testing also ensures
- BPF prog load fails
- BPF map create fails
- get fd by id fails
- get next id fails
- query fails
- BTF load fails
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/1652970334-30510-3-git-send-email-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test populates the bhash table for a given port with
MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long
a bind request on the port takes.
When populating the bhash table, we create the sockets and then bind
the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT
are set). When timing how long a bind on the port takes, we bind on a
different address without SO_REUSEPORT set. We do not set SO_REUSEPORT
because we are interested in the case where the bind request does not
go through the tb->fastreuseport path, which is fragile (eg
tb->fastreuseport path does not work if binding with a different uid).
To run the test locally, I did:
* ulimit -n 65535000
* ip addr add 2001:0db8:0:f101::1 dev eth0
* ./bind_bhash_test 443
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 49bb39bdda ("selftests: fib_nexthops: Make the test more robust")
increased the timeout of ping commands to 5 seconds, to make the test
more robust. Make the timeout configurable using '-w' argument to allow
user to change it depending on the system that runs the test. Some systems
suffer from slow forwarding performance, so they may need to change the
timeout.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220519070921.3559701-1-amcohen@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the trampoline_count test doesn't include any fmod_ret bpf
programs, fix it to make the test cover all possible trampoline program
types.
Since fmod_ret bpf programs can't be attached to __set_task_comm function,
as it's neither whitelisted for error injection nor a security hook, change
it to bpf_modify_return_test.
This patch also does some other cleanups such as removing duplicate code,
dropping inconsistent comments, etc.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220519150610.601313-1-ytcoode@gmail.com
This patch verifies the struct member token of struct mptcp_sock. Add a
new member token in struct mptcp_storage to store the token value of the
msk socket got by bpf_skc_to_mptcp_sock(). Trace the kernel function
mptcp_pm_new_connection() by using bpf fentry prog to obtain the msk token
and save it in a global bpf variable. Pass the variable to verify_msk() to
verify it with the token saved in socket_storage_map.
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- skip the test if 'ip mptcp monitor' is not supported (Mat)
v5:
- Drop 'ip mptcp monitor', trace mptcp_pm_new_connection instead (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-6-mathew.j.martineau@linux.intel.com
This patch extends the MPTCP test base, to test the new helper
bpf_skc_to_mptcp_sock().
Define struct mptcp_sock in bpf_tcp_helpers.h, use bpf_skc_to_mptcp_sock
to get the msk socket in progs/mptcp_sock.c and store the infos in
socket_storage_map.
Get the infos from socket_storage_map in prog_tests/mptcp.c. Add a new
function verify_msk() to verify the infos of MPTCP socket, and rename
verify_sk() to verify_tsk() to verify TCP socket only.
v2: Add CONFIG_MPTCP check for clearer error messages
v4:
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop bpf_mptcp_helpers.h (Andrii)
v5:
- some 'ASSERT_*' were replaced in the next commit by mistake.
- Drop CONFIG_MPTCP (Martin)
- Use ASSERT_EQ (Andrii)
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-5-mathew.j.martineau@linux.intel.com
This patch adds a base for MPTCP specific tests.
It is currently limited to the is_mptcp field in case of plain TCP
connection because there is no easy way to get the subflow sk from a msk
in userspace. This implies that we cannot lookup the sk_storage attached
to the subflow sk in the sockops program.
v4:
- add copyright 2022 (Andrii)
- use ASSERT_* instead of CHECK_FAIL (Andrii)
- drop SEC("version") (Andrii)
- use is_mptcp in tcp_sock, instead of bpf_tcp_sock (Martin & Andrii)
v5:
- Drop connect_to_mptcp_fd (Martin)
- Use BPF test skeleton (Andrii)
- Use ASSERT_EQ (Andrii)
- Drop the 'msg' parameter of verify_sk
Co-developed-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/bpf/20220519233016.105670-4-mathew.j.martineau@linux.intel.com
CONFIG_IKCONFIG_PROC is required by BPF selftests, otherwise we get
errors like this:
libbpf: failed to open system Kconfig
libbpf: failed to load object 'kprobe_multi'
libbpf: failed to load BPF skeleton 'kprobe_multi': -22
It's because /proc/config.gz is opened in bpf_object__read_kconfig_file()
in tools/lib/bpf/libbpf.c:
file = gzopen("/proc/config.gz", "r");
So this patch enables CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC in
tools/testing/selftests/bpf/config.
Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220519233016.105670-3-mathew.j.martineau@linux.intel.com
Adds some selftests to test ioctl error paths of the uv-uapi.
The Kconfig S390_UV_UAPI must be selected and the Ultravisor facility
must be available. The test can be executed by non-root, however, the
uvdevice special file /dev/uv must be accessible for reading and
writing which may imply root privileges.
./test-uv-device
TAP version 13
1..6
# Starting 6 tests from 3 test cases.
# RUN uvio_fixture.att.fault_ioctl_arg ...
# OK uvio_fixture.att.fault_ioctl_arg
ok 1 uvio_fixture.att.fault_ioctl_arg
# RUN uvio_fixture.att.fault_uvio_arg ...
# OK uvio_fixture.att.fault_uvio_arg
ok 2 uvio_fixture.att.fault_uvio_arg
# RUN uvio_fixture.att.inval_ioctl_cb ...
# OK uvio_fixture.att.inval_ioctl_cb
ok 3 uvio_fixture.att.inval_ioctl_cb
# RUN uvio_fixture.att.inval_ioctl_cmd ...
# OK uvio_fixture.att.inval_ioctl_cmd
ok 4 uvio_fixture.att.inval_ioctl_cmd
# RUN attest_fixture.att_inval_request ...
# OK attest_fixture.att_inval_request
ok 5 attest_fixture.att_inval_request
# RUN attest_fixture.att_inval_addr ...
# OK attest_fixture.att_inval_addr
ok 6 attest_fixture.att_inval_addr
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220510144724.3321985-3-seiden@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220510144724.3321985-3-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add a test to demonstrate that when the guest programs an event select
it is matched correctly in the pmu event filter and not inadvertently
filtered. This could happen on AMD if the high nybble[1] in the event
select gets truncated away only leaving the bottom byte[2] left for
matching.
This is a contrived example used for the convenience of demonstrating
this issue, however, this can be applied to event selects 0x28A (OC
Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up
being denied when the event select was only set up to deny 0x28A.
[1] bits 35:32 in the event select register and bits 11:8 in the event
select.
[2] bits 7:0 in the event select register and bits 7:0 in the event
select.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-3-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a helper function that creates a pmu event filter given an event
list. Currently, a pmu event filter can only be created with the same
hard coded event list. Add a way to create one given a different event
list.
Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify
it's purpose given the introduction of create_pmu_event_filter.
No functional changes intended.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220517051238.2566934-2-aaronlewis@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, we simply hang using "while (1) ;" upon any unexpected
guest traps because the default guest trap handler is guest_hang().
The above approach is not useful to anyone because KVM selftests
users will only see a hung application upon any unexpected guest
trap.
This patch improves unexpected guest trap handling for KVM RISC-V
selftests by doing the following:
1) Return to host user-space
2) Dump VCPU registers
3) Die using TEST_ASSERT(0, ...)
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the multiple subflows test case for MP_FAIL, to test the MP_FAIL
reset case. Use the test_linkfail value to make 1024KB test files.
Invoke reset_with_fail() to use 'iptables' and 'tc action pedit' rules
to produce the bit flips to trigger the checksum failures on ns2eth2.
Add delays on ns2eth1 to make sure more data can translate on ns2eth2.
The check_invert flag is enabled in reset_with_fail(), so this test
prints out the inverted bytes, instead of the file mismatch errors.
Invoke pedit_action_pkts() to get the numbers of the packets edited
by the tc pedit actions, and print this numbers to the output.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm and netfilter subtrees.
Notably this reverts a recent TCP/DCCP netns-related change to address
a possible UaF.
Current release - regressions:
- tcp: revert "tcp/dccp: get rid of inet_twsk_purge()"
- xfrm: set dst dev to blackhole_netdev instead of loopback_dev in
ifdown
Previous releases - regressions:
- netfilter: flowtable: fix TCP flow teardown
- can: revert "can: m_can: pci: use custom bit timings for Elkhart
Lake"
- xfrm: check encryption module availability consistency
- eth: vmxnet3: fix possible use-after-free bugs in
vmxnet3_rq_alloc_rx_buf()
- eth: mlx5: initialize flow steering during driver probe
- eth: ice: fix crash when writing timestamp on RX rings
Previous releases - always broken:
- mptcp: fix checksum byte order
- eth: lan966x: fix assignment of the MAC address
- eth: mlx5: remove HW-GRO from reported features
- eth: ftgmac100: disable hardware checksum on AST2600"
* tag 'net-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
ptp: ocp: change sysfs attr group handling
selftests: forwarding: fix missing backslash
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
net: ftgmac100: Disable hardware checksum on AST2600
igb: skip phy status check where unavailable
nfc: pn533: Fix buggy cleanup order
mptcp: Do TCP fallback on early DSS checksum failure
mptcp: fix checksum byte order
net: af_key: check encryption module availability consistency
net: af_key: add check for pfkey_broadcast in function pfkey_process
net/mlx5: Drain fw_reset when removing device
net/mlx5e: CT: Fix setting flow_source for smfs ct tuples
net/mlx5e: CT: Fix support for GRE tuples
net/mlx5e: Remove HW-GRO from reported features
net/mlx5e: Properly block HW GRO when XDP is enabled
net/mlx5e: Properly block LRO when XDP is enabled
net/mlx5e: Block rx-gro-hw feature in switchdev mode
...
Kees writes:
lkdtm updates for -next
- Test for new usercopy memory regions
- avoid GCC 12 warnings
- update expected CONFIGs for selftests
* tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/heap: Hide allocation size from -Warray-bounds
selftests/lkdtm: Add configs for stackleak and "after free" tests
lkdtm/usercopy: Check vmalloc and >0-order folios
lkdtm/usercopy: Rename "heap" to "slab"
lkdtm: cfi: Fix type width for masking PAC bits
When build bpf test and install it to another folder, e.g.
make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \
SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests
The ima_setup.sh is missed in target folder, which makes test_ima failed.
Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220516040020.653291-1-liuhangbin@gmail.com
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
hw_stats_l3.sh test is failing often for l3 stats shows less than 20
packets after 2 seconds sleep.
This is happening since there is a race between the 2 seconds sleep and
the netdevsim actually delivering the packets.
Increase the sleep time so the packets will be delivered successfully on
time.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf selftests can no longer be built with CFLAGS=-static with
liburandom_read.so and its dependent target.
Filter out -static for liburandom_read.so and its dependent target.
When building statically, this leaves urandom_read relying on
system-wide shared libraries.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220514002115.1376033-1-yosryahmed@google.com
Old tc versions (iproute2 5.3) show actions in multiple lines, not a
single line. Then the following unexpected MP_FAIL selftest output
occurs:
file received by server has inverted byte at 169
./mptcp_join.sh: line 1277: [: [{"total acts":1},{"actions":[{"order":0 pedit ,"control_action":{"type":"pipe"}keys 1
index 1 ref 1 bind 1,"installed":0,"last_used":0
key #0 at 148: val ff000000 mask ffffffff
5: integer expression expected
001 Infinite map syn[ ok ] - synack[ ok ] - ack[ ok ]
sum[ ok ] - csum [ ok ]
ftx[ ok ] - failrx[ ok ]
rtx[ ok ] - rstrx [ ok ]
itx[ ok ] - infirx[ ok ]
ftx[ ok ] - failrx[ ok ] invert
This patch adds a 'grep' before 'sed' to fix this.
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the readability of error message which says module not found.
The new behaviour is consistent with the modprobe command.
Signed-off-by: Gautam Menghani <gautammenghani201@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The config for the serial console for riscv,
CONFIG_SERIAL_EARLYCON_RISCV_SBI, added a dependency,
CONFIG_RISCV_SBI_V01, at some point, so add that in to the base arch
config.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's often desirable (particularly in test automation) to run as many
tests as possible. This config enables all the tests which work as
builtins under UML at present, increasing the total tests run from 156
to 342 (not counting 36 'skipped' tests).
They can be run with:
./tools/testing/kunit/kunit.py run
--kunitconfig=./tools/testing/kunit/configs/all_tests_uml.config
This acts as an in-between point between the KUNIT_ALL_TESTS config
(which enables only tests whose dependencies are already enabled), and
the kunit_tool --alltests option, which tries to use allyesconfig,
taking a very long time to build and breaking very often.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This primarily comes from running pylint over kunit tool code and
ignoring some warnings we don't care about.
If we ever got a fully clean setup, we could add this to run_checks.py,
but we're not there yet.
Fix things like
* Drop unused imports
* check `is None`, not `== None` (see PEP 8)
* remove redundant parens around returns
* remove redundant `else` / convert `elif` to `if` where appropriate
* rename make_arch_qemuconfig() param to base_kunitconfig (this is the
name used in the subclass, and it's a better one)
* kunit_tool_test: check the exit code for SystemExit (could be 0)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There should be no behavioral changes from this patch.
This patch removes redundant comment text, inlines a function used in
only one place, and other such minor tweaks.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Consider this invocation
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
# Subtest: no_tests_suite
# catastrophic error!
not ok 1 - no_tests_suite
EOF
It will have a 0 exit code even though there's a "not ok".
Consider this one:
$ ./tools/testing/kunit/kunit.py parse <<EOF
TAP version 14
1..2
ok 1 - suite
not ok 1 - no_tests_suite
EOF
It will a non-zero exit code.
Why?
We have this line in the kunit_parser.py
> parent_test = parse_test_header(lines, test)
where we have special handling when we see "# Subtest" and we ignore the
explicit reported "not ok 1" status!
Also, NO_TESTS at a suite-level only results in a non-zero status code
where then there's only one suite atm.
This change is the minimal one to make sure we don't overwrite it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This logic depends on the kernel logging a message containing
'kunit test case crashed', but there is no corresponding logic to do so.
This is likely a relic of the revision process KUnit initially went
through when being upstreamed.
Delete it given
1) it's been missing for years and likely won't get implemented
2) the parser has been moving to be a more general KTAP parser,
kunit-only magic like this isn't how we'd want to implement it.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The "bti" selftests are built with -nostdlib, which apparently
automatically creates a statically linked binary, which is what we want
and need for BTI (to avoid interactions with the dynamic linker).
However this is not true when building a PIE binary, which some
toolchains (Ubuntu) configure as the default.
When compiling btitest with such a toolchain, it will create a
dynamically linked binary, which will probably fail some tests, as the
dynamic linker might not support BTI:
===================
TAP version 13
1..18
not ok 1 nohint_func/call_using_br_x0
not ok 2 nohint_func/call_using_br_x16
not ok 3 nohint_func/call_using_blr
....
===================
To make sure we create static binaries, add an explicit -static on the
linker command line. This forces static linking even if the toolchain
defaults to PIE builds, and fixes btitest runs on BTI enabled machines.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Fixes: 314bcbf09f ("kselftest: arm64: Add BTI tests")
Link: https://lore.kernel.org/r/20220511172129.2078337-1-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* kvm-arm64/psci-suspend:
: .
: Add support for PSCI SYSTEM_SUSPEND and allow userspace to
: filter the wake-up events.
:
: Patches courtesy of Oliver.
: .
Documentation: KVM: Fix title level for PSCI_SUSPEND
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Don't depend on fallthrough to hide SYSTEM_RESET2
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/hcall-selection:
: .
: Introduce a new set of virtual sysregs for userspace to
: select the hypercalls it wants to see exposed to the guest.
:
: Patches courtesy of Raghavendra and Oliver.
: .
KVM: arm64: Fix hypercall bitmap writeback when vcpus have already run
KVM: arm64: Hide KVM_REG_ARM_*_BMAP_BIT_COUNT from userspace
Documentation: Fix index.rst after psci.rst renaming
selftests: KVM: aarch64: Add the bitmap firmware registers to get-reg-list
selftests: KVM: aarch64: Introduce hypercall ABI test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Rename psci_cpu_on_test to psci_test
tools: Import ARM SMCCC definitions
Docs: KVM: Add doc for the bitmap firmware registers
Docs: KVM: Rename psci.rst to hypercalls.rst
KVM: arm64: Add vendor hypervisor firmware register
KVM: arm64: Add standard hypervisor firmware register
KVM: arm64: Setup a framework for hypercall bitmap firmware registers
KVM: arm64: Factor out firmware register handling from psci.c
Signed-off-by: Marc Zyngier <maz@kernel.org>
