Previously changing mac address gives false negative because
ip link set <interface> address <MAC> return with
RTNLINK: Permission denied.
In iavf_set_mac was check if PF handled our mac set request,
even before filter was added to list.
Because this check returns always true and it never waits for
PF's response.
Move iavf_is_mac_handled to wait_event_interruptible_timeout
instead of false. Now it will wait for PF's response and then
check if address was added or rejected.
Fixes: 35a2443d09 ("iavf: Add waiting for response from PF in set mac")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some calls to synthesis functions set err < 0 but only warn about the
failure and continue. However they do not set err back to zero, relying
on subsequent code to do that.
That changed with the introduction of option --synth. When --synth=no
subsequent functions that set err back to zero are not called.
Fix by setting err = 0 in those cases.
Example:
Before:
$ perf record --no-bpf-event --synth=all -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
After:
$ perf record --no-bpf-event --synth=no -o /tmp/huh uname
Couldn't synthesize bpf events.
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ]
Fixes: 41b740b6e8 ("perf record: Add --synth option")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix voltage allocation and reading to support all channels in all VMs.
Prior to this change allocation and reading were done only for the first
channel in each VM.
This change counts the total number of channels for allocation, and takes
into account the channel offset when reading the sample data register.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to Moortec Embedded Voltage Monitor (MEVM) series 3 data
sheet, the minimum input signal is -100mv and maximum input signal
is +1000mv.
The equation used to convert the digital word to voltage uses mixed
types (*val signed and n unsigned), and on 64 bit machines also has
different size, since sizeof(u32) = 4 and sizeof(long) = 8.
So when measuring a negative input, n will be small enough, such that
PVT_N_CONST * n < PVT_R_CONST, and the result of
(PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive
32 bit number. Then when storing the result in *val it will be the same
value just in 64 bit (instead of it representing a negative number which
will what happen when sizeof(long) = 4).
When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1
dividing the number by 1024 should result of in 0, but because ">> 10"
is used, and the sign bit is used to fill the vacated bit positions, it
results in -1 (0xf...fffff) which is wrong.
This change fixes the sign problem and supports negative values by
casting n to long and replacing the shift right with div operation.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set
to 0, and no voltage channel infos are allocated.
The reason num is set to 0 when "intel,vm-map" is missing is to set the
entire pvt->vm_idx[] with incremental channel numbers, but it didn't
take into consideration that same num is used later in devm_kcalloc().
If "intel,vm-map" does exist there is no need to set the unspecified
channels with incremental numbers, because the unspecified channels
can't be accessed in pvt_read_in() which is the only other place besides
the probe functions that uses pvt->vm_idx[].
This change fixes the bug by moving the incremental channel numbers
setting to be done only if "intel,vm-map" property is defined (starting
loop from 0), and removing 'num = 0'.
Fixes: 9d823351a3 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change "intel,vm-map" property to be optional instead of required.
The driver implementation indicates it is not mandatory to have
"intel,vm-map" in the device tree:
- probe doesn't fail in case it is absent.
- explicit comment in code - "Incase intel,vm-map property is not
defined, we assume incremental channel numbers".
Fixes: 748022ef09 ("hwmon: Add DT bindings schema for PVT controller")
Signed-off-by: Eliav Farber <farbere@amazon.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220908152449.35457-2-farbere@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit b91e5492f9 ("perf record: Add a dummy event on hybrid
systems to collect metadata records") adds a dummy event on hybrid
systems to fix the symbol "unknown" issue when the workload is created
in a P-core but runs on an E-core. The added dummy event will cause
"perf script -F iregs" to fail. Dummy events do not have "iregs"
attribute set, so when we do evsel__check_attr, the "iregs" attribute
check will fail, so the issue happened.
The following commit [1] has fixed a similar issue by skipping the attr
check for the dummy event because it does not have any samples anyway. It
works okay for the normal mode, but the issue still happened when running
the test in the pipe mode. In the pipe mode, it calls process_attr() which
still checks the attr for the dummy event. This commit fixed the issue by
skipping the attr check for the dummy event in the API evsel__check_attr,
Otherwise, we have to patch everywhere when evsel__check_attr() is called.
Before:
#./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field.
0x120 [0x90]: failed to process type: 64
#
After:
# ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5
ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100
ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71
ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0
ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1
ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58
#
[1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/
Fixes: b91e5492f9 ("perf record: Add a dummy event on hybrid systems to collect metadata records")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull spi fixes from Mark Brown:
"Several fixes that came in since the merge window, the major one being
a fix for the spi-mux driver which was broken by the performance
optimisations due to it peering inside the core's data structures more
than it should"
* tag 'spi-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi: Fix queue hang if previous transfer failed
spi: mux: Fix mux interaction with fast path optimisations
spi: cadence-quadspi: Disable irqs during indirect reads
spi: bitbang: Fix lsb-first Rx
Pull regulator fixes from Mark Brown:
"One core fix here improving the error handling on enable failure, plus
smaller fixes for the pfuze100 drive and the SPMI DT bindings"
* tag 'regulator-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix qcom,spmi-regulator schema
regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()
regulator: core: Clean up on enable failure
Pull regmap fix from Mark Brown:
"A fix for how we handle controller constraints on SPI message sizes,
only impacting systems with SPI controllers with very low limits like
the AMD controller used in the Steam Deck"
* tag 'regmap-fix-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi: Reserve space for register address/padding
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- fix a use after free in nvmet (Bart Van Assche)
- fix a use after free when detecting digest errors (Sagi Grimberg)
- fix regression that causes sporadic TCP requests to time out
(Sagi Grimberg)
- fix two off by ones errors in the nvmet ZNS support
(Dennis Maisenbacher)
- requeue aen after firmware activation (Keith Busch)"
* tag 'nvme-6.0-2022-09-08' of git://git.infradead.org/nvme:
nvme: requeue aen after firmware activation
nvmet: fix mar and mor off-by-one errors
nvme-tcp: fix regression that causes sporadic requests to time out
nvme-tcp: fix UAF when detecting digest errors
nvmet: fix a use-after-free
Commit 52824ca450 ("drm/panel-edp: Better describe eDP panel delays")
clarified the various delays used for eDP panels, tying them to the eDP
panel timing diagram.
For Innolux N116BCA-EA1, .prepare_to_enable would be:
t4_min + t5_min + t6_min + max(t7_max, t8_min)
Since t4_min and t5_min are both 0, the panel can use either .enable or
.prepare_to_enable.
As .enable is better defined, switch to using .enable for this panel.
Also add .disable = 50, based on the datasheet's t9_min value. This
effectively makes the delays the same as delay_200_500_e80_d50.
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 51d35631c9 ("drm/panel-simple: Add N116BCA-EA1")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908085454.1024167-1-wenst@chromium.org
The offending commit removed mmap_per_thread(), which did not consider
the different set-output rules for per-thread mmaps i.e. in the per-thread
case set-output is used for file descriptors of the same thread not the
same cpu.
This was not immediately noticed because it only happens with
multi-threaded targets and we do not have a test for that yet.
Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu
events i.e. to continue to allow the mixing of per-thread and per-cpu
mmaps.
Debug messages (with -vv) show the file descriptors that are opened with
sys_perf_event_open. New debug messages are added (needs -vvv) that show
also which file descriptors are mmapped and which are redirected with
set-output.
In the per-cpu case (cpu != -1) file descriptors for the same CPU are
set-output to the first file descriptor for that CPU.
In the per-thread case (cpu == -1) file descriptors for the same thread are
set-output to the first file descriptor for that thread.
Example (process 17489 has 2 threads):
Before (but with new debug prints):
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
failed to mmap with 22 (Invalid argument)
After:
$ perf record --no-bpf-event -vvv --per-thread -p 17489
<SNIP>
sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6
<SNIP>
libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 1: mmapping fd 6
<SNIP>
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ]
Per-cpu example (process 20341 has 2 threads, same as above):
$ perf record --no-bpf-event -vvv -p 20341
<SNIP>
sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13
sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20
<SNIP>
libperf: mmap_per_cpu: nr cpu values 8 nr threads 2
libperf: idx 0: mmapping fd 5
libperf: idx 0: set output fd 6 -> 5
libperf: idx 1: mmapping fd 7
libperf: idx 1: set output fd 8 -> 7
libperf: idx 2: mmapping fd 9
libperf: idx 2: set output fd 10 -> 9
libperf: idx 3: mmapping fd 11
libperf: idx 3: set output fd 12 -> 11
libperf: idx 4: mmapping fd 13
libperf: idx 4: set output fd 14 -> 13
libperf: idx 5: mmapping fd 15
libperf: idx 5: set output fd 16 -> 15
libperf: idx 6: mmapping fd 17
libperf: idx 6: set output fd 18 -> 17
libperf: idx 7: mmapping fd 19
libperf: idx 7: set output fd 20 -> 19
<SNIP>
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ]
Fixes: ae4f8ae16a ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Reported-by: Tomáš Trnka <trnka@scm.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit efe57fd58e.
The assumption that it is impossible to return an ERR pointer from
rpc_run_task() no longer holds due to commit 25cf32ad5d ("SUNRPC:
Handle allocation failure in rpc_new_task()").
Fixes: 25cf32ad5d ('SUNRPC: Handle allocation failure in rpc_new_task()')
Fixes: efe57fd58e ('SUNRPC: Remove unreachable error condition')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The fallocate call invalidates suid and sgid bits as part of normal
operation. We need to mark the mode bits as invalid when using fallocate
with an suid so these will be updated the next time the user looks at them.
This fixes xfstests generic/683 and generic/684.
Reported-by: Yue Cui <cuiyue-fnst@fujitsu.com>
Fixes: 913eca1aea ("NFS: Fallocate should use the nfs4_fattr_bitmap")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".
But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".
Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.
Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI fixes for v6.0
Few fixes addressing possible out of bound access violations by
hardening them, incorrect asynchronous resets by restricting them,
incorrect SCMI tracing message format by harmonizing them, missing
kernel-doc in optee transport, missing SCMI PM driver remove
routine by adding it to avoid warning when scmi driver is unloaded
and finally improve checks in the info_get operations.
* tag 'scmi-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Harmonize SCMI tracing message format
firmware: arm_scmi: Add SCMI PM driver remove routine
firmware: arm_scmi: Fix the asynchronous reset requests
firmware: arm_scmi: Harden accesses to the reset domains
firmware: arm_scmi: Harden accesses to the sensor domains
firmware: arm_scmi: Improve checks in the info_get operations
firmware: arm_scmi: Fix missing kernel-doc in optee
Link: https://lore.kernel.org/r/20220829174435.207911-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If allocating memory for the target SVE state in za_set() fails we clear
TIF_SME for the ptracing task which is obviously not correct. If we are
here we know that the target task already had neither TIF_SVE nor
TIF_SME set since we only need to allocate if either the target had not
used either SVE or SME and had no need to allocate state before or we
just changed the vector length with vec_set_vector_length() which clears
TIF_ for us on allocation failure so just remove the clear entirely.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220902132802.39682-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc, netfilter, wireless and bluetooth
subtrees.
Current release - regressions:
- skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
- bluetooth: fix regression preventing ACL packet transmission
Current release - new code bugs:
- dsa: microchip: fix kernel oops on ksz8 switches
- dsa: qca8k: fix NULL pointer dereference for
of_device_get_match_data
Previous releases - regressions:
- netfilter: clean up hook list when offload flags check fails
- wifi: mt76: fix crash in chip reset fail
- rxrpc: fix ICMP/ICMP6 error handling
- ice: fix DMA mappings leak
- i40e: fix kernel crash during module removal
Previous releases - always broken:
- ipv6: sr: fix out-of-bounds read when setting HMAC data.
- tcp: TX zerocopy should not sense pfmemalloc status
- sch_sfb: don't assume the skb is still around after
enqueueing to child
- netfilter: drop dst references before setting
- wifi: wilc1000: fix DMA on stack objects
- rxrpc: fix an insufficiently large sglist in
rxkad_verify_packet_2()
- fec: use a spinlock to guard `fep->ptp_clk_on`
Misc:
- usb: qmi_wwan: add Quectel RM520N"
* tag 'net-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
sch_sfb: Also store skb len before calling child enqueue
net: phy: lan87xx: change interrupt src of link_up to comm_ready
net/smc: Fix possible access to freed memory in link clear
net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skb
net: skb: export skb drop reaons to user by TRACE_DEFINE_ENUM
net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clear
net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in vsc9959_sched_speed_set
net: dsa: felix: disable cut-through forwarding for frames oversized for tc-taprio
net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet
net: usb: qmi_wwan: add Quectel RM520N
net: dsa: qca8k: fix NULL pointer dereference for of_device_get_match_data
tcp: fix early ETIMEDOUT after spurious non-SACK RTO
stmmac: intel: Simplify intel_eth_pci_remove()
net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()
ipv6: sr: fix out-of-bounds read when setting HMAC data.
bonding: accept unsolicited NA message
bonding: add all node mcast address when slave up
bonding: use unspecified address if no available link local address
wifi: use struct_group to copy addresses
wifi: mac80211_hwsim: check length for virtio packets
...
Commit d4252071b9 ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.
However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.
That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.
Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock). A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.
Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads. In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:
fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression
although you presumably need a fast disk and a lot of cores to actually
notice.
Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull EFI fixes from Ard Biesheuvel:
"A couple of low-priority EFI fixes:
- prevent the randstruct plugin from re-ordering EFI protocol
definitions
- fix a use-after-free in the capsule loader
- drop unused variable"
* tag 'efi-urgent-for-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: capsule-loader: Fix use-after-free in efi_capsule_write
efi/x86: libstub: remove unused variable
efi: libstub: Disable struct randomization
Enabling panfrost GPU OPP with dynamic regulator will make OPP
responsible to enable and configure it.
Unfortunately OPP configure and enable the regulator when an OPP
is asked to be set, which is not the case during
panfrost_devfreq_init().
This leave the regulator unconfigured and if no GPU load is
triggered, no OPP is asked to be set which make the regulator framework
switching it off during regulator_late_cleanup() without
noticing and therefore make the board hang as any access to GPU
memory space make bus locks up.
Call dev_pm_opp_set_opp() with the recommend OPP in
panfrost_devfreq_init() to enable the regulator, this will properly
configure and enable the regulator and will avoid any switch off
by regulator_late_cleanup().
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906153034.153321-5-peron.clem@gmail.com
Cong Wang noticed that the previous fix for sch_sfb accessing the queued
skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue
function was also calling qdisc_qstats_backlog_inc() after enqueue, which
reads the pkt len from the skb cb field. Fix this by also storing the skb
len, and using the stored value to increment the backlog after enqueueing.
Fixes: 9efd23297c ("sch_sfb: Don't assume the skb is still around after enqueueing to child")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently phy link up/down interrupt is enabled using the
LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function,
phy link is determined using the T1_MODE_STAT_REG register comm_ready bit.
comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status.
Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set
first but comm_ready bit takes some time to set based on local and
remote receiver status.
As per the current implementation, interrupt is triggered using link_up
but the comm_ready bit is still cleared in the read_status function. So,
link is always down. Initially tested with the shared interrupt
mechanism with switch and internal phy which is working, but after
implementing interrupt controller it is not working.
It can fixed either by updating the read_status function to read from
LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for
comm_ready bit. But the validation team recommends the use of comm_ready
for link detection.
This patch fixes by enabling the comm_ready bit for link_up in the
LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in
LAN87xx_INTERRUPT_MASK register.
Fixes: 8a1b415d70 ("net: phy: added ethtool master-slave configuration support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE
range/size manipulation, while these 2 registers have difference size
field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As reported[1] by Nathan, the recently added plpks driver will crash if
it's built into the kernel and booted on a non-pseries machine, eg
powernv:
kernel BUG at arch/powerpc/kernel/syscall.c:39!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
...
NIP system_call_exception+0x90/0x3d0
LR system_call_common+0xec/0x250
Call Trace:
0xc0000000035c3e10 (unreliable)
system_call_common+0xec/0x250
--- interrupt: c00 at plpar_hcall+0x38/0x60
NIP: c0000000000e4300 LR: c00000000202945c CTR: 0000000000000000
REGS: c0000000035c3e80 TRAP: 0c00 Not tainted (6.0.0-rc4)
MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28000284 XER: 00000000
...
NIP plpar_hcall+0x38/0x60
LR pseries_plpks_init+0x64/0x23c
--- interrupt: c00
On powernv Linux is the hypervisor, so a hypercall just ends up going to
the syscall path, which BUGs if the syscall (hypercall) didn't come from
userspace.
The fix is simply to not probe the plpks driver on non-pseries machines.
[1] https://lore.kernel.org/linuxppc-dev/Yxe06fbq18Wv9y3W@dev-arch.thelio-3990X/
Fixes: 2454a7af0f ("powerpc/pseries: define driver for Platform KeyStore")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Dan Horák <dan@danny.cz>
Reviewed-by: Dan Horák <dan@danny.cz>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220907065038.1604504-1-mpe@ellerman.id.au
Commit c272612cb4 ("kunit: Taint the kernel when KUnit tests are run")
added a new taint flag for when in-kernel tests run. This commit adds
recognition of this new flag in kernel-chktaint.
With this change the correct reason will be reported if the kernel is
tainted because of a test run.
Amended Commit log: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Joe Fradley <joefradley@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.
This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.
So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Currently cpu_clustergroup_mask() will return CPU mask if cluster span more
or the same CPUs as cpu_coregroup_mask(). This will result topology borken
on non-Cluster SMT machines when building with CONFIG_SCHED_CLUSTER=y.
Test with:
qemu-system-aarch64 -enable-kvm -machine virt \
-net none \
-cpu host \
-bios ./QEMU_EFI.fd \
-m 2G \
-smp 48,sockets=2,cores=12,threads=2 \
-kernel $Image \
-initrd $Rootfs \
-nographic
-append "rdinit=init console=ttyAMA0 sched_verbose loglevel=8"
We'll get below error:
[ 3.084568] BUG: arch topology borken
[ 3.084570] the SMT domain not a subset of the CLS domain
Since cluster is a level higher than SMT, fix this by making cluster
spans at least SMT CPUs.
Fixes: bfcc439743 ("arch_topology: Limit span of cpu_clustergroup_mask()")
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20220905122615.12946-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
