The default resolution code was different for each role
as compressed formats need to pass bytesperline as 0 and
set up customised buffer sizes.
This is common setup, therefore amend get_sizeimage and
get_bytesperline to do the correct thing whether compressed
or uncompressed.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The log line was missing a closing \n, so wasn't added to the
log immediately.
Adds the function of the V4L2 device that is being unregistered
too.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
map_lock and kernelid_map are created in probe, but not released
in release should the vcsm service not connect (eg running the
cutdown firmware).
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
queue_setup tries creating the relevant MMAL component and configures
the input and output ports as we're expecting to start streaming.
If the port configuration failed then it destroyed the component,
but failed to clear the component handle, therefore release tried
destroying the component again.
Adds some logging should the port config fail as well.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Code from the misc /dev node was still present in
bcm2835_vc_sm_cma_remove, which caused a NULL deref.
Remove it.
See #2885.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Inserting timing information into the VUI block of the SPS is
optional with the VPU encoder.
GStreamer appears to require them when using V4L2 M2M, therefore
set the option to enable them from the encoder.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
mmal_parameters.h hasn't been updated to reflect additions made
over the last few years. Update it to reflect the currently
supported parameters.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
If the queue is configured as VB2_MEMORY_DMABUF then vb2_core_expbuf
fails as it ensures the queue is defined as VB2_MEMORY_MMAP.
Correct the handling so that we unmap the buffer from vcsm and the
VPU on cleanup, and then correctly get the dma buf of the new buffer.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
This is a workaround for GStreamer currently not identifying Bayer
as a raw format, therefore any device that supports it does not
match the criteria for v4l2convert.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The MMAL ISP component can also use this same V4L2 wrapper to
provide a M2M format conversion and resizer.
Instantiate 3 V4L2 devices now, one for each of decode, encode,
and isp.
The ISP currently doesn't expose any controls via V4L2, but this
can be extended in the future.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The driver was previously working with hard coded tables of
which video formats were supported by each component.
The components advertise this information via a MMAL parameter,
so retrieve the information from there during probe, and store
in the state structure for that device.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
There is an enum for the errors that the VPU can return.
port_parameter_get was negating that value, but also using -EINVAL
from the Linux error codes.
Pass the VPU error code as positive values. Should the function
need to pass a Linux failure, then return that as negative.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
mmal-vchiq is a reimplementation of the userland library for MMAL.
When getting a parameter, the client provides the storage and
the size of the storage. The VPU then returns the size of the
parameter that it wished to return, and as much as possible of
that parameter is returned to the client.
The implementation previously only returned the size provided
by the VPU should it exceed the buffer size. So for parameters
such as the supported encodings list the client had no idea
how much of the provided storage had been populated.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The list of formats was copied before Bayer support was added.
The ISP supports Bayer and is being supported by the bcm2835_codec
driver, so add in the encodings for them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
There were a number of logging lines that were using
inappropriate formatting under 64bit kernels.
The kernel_id field passed to/from the VPU was being
abused for storing the struct vc_sm_buffer *.
This breaks with 64bit kernels, so change to using an IDR.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The driver was using an unsigned int as the handle to the outside world,
and doing a nasty cast to the struct dmabuf when handed it back.
This breaks badly with a 64 bit kernel where the pointer doesn't fit
in an unsigned int.
Switch to using a void* within the kernel. Reality is that it is
a struct dma_buf*, but advertising it as such to other drivers seems
to encourage the use of it as such, and I'm not sure on the implications
of that.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Now that VCHIQ is setting up the DMA configuration as our
parent device, don't try to configure it during probe.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The VCHIQ driver now loads the audio, camera, codec, and vc-sm
drivers as platform drivers. However they were not being given
the correct DMA configuration.
Call of_dma_configure with the parent (VCHIQ) parameters to be
inherited by the child.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
src_m2m_buf and dst_m2m_buf were printed in log messages
when there are code paths that don't initialise them.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
In op_buffer_cb, the failure path checked whether there was
an associated vb2 buffer before the variable vb2 had been
assigned.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The V4L2 control API was expanded to take 64 bit values in commit
0ba2aeb6da (Apr 16 2014), but as this driver wasn't in the mainline
kernel at that point this was overlooked.
Update to use 64 bit values. This also fixes a couple of warnings
in 64 bit builds.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Fixes a v4l2-compliance failure
v4l2-test-buffers.cpp(415): g_field() == V4L2_FIELD_ANY
The driver only ever produces progresive frames, so field should
always be set to V4L2_FIELD_NONE.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Fixes a v4l2-compliance failure when passed a buffer that is
too small.
queue_setup wasn't handling the case where !(*nplanes), as
used from CREATE_BUFS and requiring the driver to sanity
check the provided buffer parameters. It was assuming that
it was always being used in the REQBUFS case where it provides
the buffer properties.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The MMAL client_component field is used with the event
mechanism to allow the client to identify the component for
which the event is generated.
The field is only 32bits in size, therefore we can't use a
pointer to the component in a 64 bit kernel.
Component handles are already held in an array per VCHI
instance, so use the array index as the client_component handle
to avoid having to create a new IDR for this purpose.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
When handling for V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER was added
the firmware would reject the setting if H264 hadn't already been
selected. This was fixed in the firmware at that point, but to
enable backwards compatibility the returned error was ignored.
That was Dec 2013, so the chances of having a firmware that still
has that issue is so close to zero that the workaround can be
removed.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
This reverts commit ab59590ed5.
Issues have been observed in LibreElec as this was unconditionally
loading the audio driver instead of having the DT parameter to
enable it.
Includes a partial revert of 2147700eb7
which fixed up the error handling.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
RGB3/BGR3 end up being 3 bytes per pixel, which meant that
the alignment code ended up trying to align using bitmasking
with a mask of 96.
That doesn't work, so switch to an arithmetic alignment for
those formats.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Following the same pattern as bcm2835-camera and bcm2835-audio,
register the vcsm-cma driver as a platform driver
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Following the same pattern as bcm2835-camera and bcm2835-audio,
register the V4L2 codec driver as a platform driver
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
This adds a V4L2 memory to memory device that wraps the MMAL
video decode and video_encode components for H264 and MJPEG encode
and decode, MPEG4, H263, and VP8 decode (and MPEG2 decode
if the appropriate licence has been purchased).
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
With the vc-sm-cma driver we can support zero copy of buffers between
the kernel and VPU. Add this support to vchiq-mmal.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Original patch was based off staging which included some cleanups
of the VCHI APIs. Those aren't present here, so switch back to
the older API.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
This new driver allows contiguous memory blocks to be imported
into the VideoCore VPU memory map, and manages the lifetime of
those objects, only releasing the source dmabuf once the VPU has
confirmed it has finished with it.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
There were dependencies on including the headers in the correct
order. Fix up the headers so that they include the other
headers that they depend on themselves.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Add the ability to send data to ports. This only supports
zero copy mode as the required bulk transfer setup calls
are not done.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
(Preparation for the codec driver).
The codec uses the event mechanism to report things such as
resolution changes. It is signalled by the cmd field of the buffer
being non-zero.
Add support for passing this information out to the client.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The callback from vchi_mmal to the client was growing lots of extra
parameters. Consolidate them into a single struct instead of
growing the list further.
The struct is associated with the client buffer, therefore there
are various changes to setup various containers for the struct,
and pass the appropriate members.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The timeout period for VPU communications is a useful thing
to extend when debugging.
Set it via a define, rather than a magic number buried in the code.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Fixes up a checkpatch error "Avoid using bool structure members
because of possible alignment issues".
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
The existing code assumed that there would only ever be 4 components,
and never freed the entries once used.
Allow arbitrary creation and destruction of components.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
In preparation for adding a video codec V4L2 module which also
wants to use vchiq-mmal functions, split it out into an
independent module.
The minimum number of changes have been made to achieve this
(eg straight moves where possible) so existing checkpatch
errors will still be present.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Remove a todo which has been done.
Remove a template line that was redundant.
Make a comment clearer as to the non-obvious meaning of a field.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
With V4L2_CID_COLORFX_CBCR calling ctrl_set_colfx it was incorrectly
assigning the colour values to the enable field of dev->colourfx
instead of the u and v fields.
Correct the assignments.
Reported as a Coverity issue
Detected by CoverityScan CID#1419711 ("Unused value")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Controls of type MMAL_CONTROL_TYPE_STD_MENU call v4l2_ctrl_new_std_menu
with a max value and a mask. The max value is one of the defined
values for the control, however in the config array there are several
entries where raw numbers have been used instead. Replace these
with the appropriate enum.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
