Pull pin control updates from Linus Walleij:
"No pin control core changes this time.
New drivers:
- Realtek RTD family pin control driver and RTD1619B, RTD1319D and
RTD1315E subdrivers
- Nuvoton NPCM8xx combined pin control and GPIO driver
- Amlogic T7 pin control driver
- Renesas RZ/G3S pin control driver
Improvements:
- A number of additional UART groups added to the Mediatek MT7981
driver
- MPM pin maps added for Qualcomm MSM8996, SM6115, SM6125 and SDM660
- Extra GPIO banks for the Sunxi H616
- MLSP I2C6 function support in Qualcomm MSM8226
- Some __counted_by() annotations for dynamic arrays
- Ongoing work to make remove() return void
- LSBC groups and functions in the Renesas R8A7778"
* tag 'pinctrl-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (110 commits)
pinctrl: Use device_get_match_data()
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add missing wakeup-parent
dt-bindings: pinctrl: nuvoton,npcm845: Add missing additionalProperties on gpio child nodes
dt-bindings: pinctrl: brcm: Ensure all child node properties are documented
pinctrl: renesas: rzn1: Convert to platform remove callback returning void
pinctrl: renesas: rzg2l: Add RZ/G3S support
dt-bindings: pinctrl: renesas: Document RZ/G3S SoC
pinctrl: renesas: rzg2l: Add support for different DS values on different groups
pinctrl: renesas: rzg2l: Move DS and OI to SoC-specific configuration
pinctrl: renesas: rzg2l: Adapt function number for RZ/G3S
pinctrl: renesas: rzg2l: Adapt for different SD/PWPR register offsets
pinctrl: renesas: rzg2l: Index all registers based on port offset
pinctrl: renesas: rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()
pinctrl: renesas: r8a7778: Add LBSC pins, groups, and functions
pinctrl: intel: fetch community only when we need it
pinctrl: cherryview: reduce scope of PIN_CONFIG_BIAS_HIGH_IMPEDANCE case
pinctrl: cherryview: Convert to platform remove callback returning void
pinctrl: sprd-sc9860: Convert to platform remove callback returning void
pinctrl: qcom/msm: Convert to platform remove callback returning void
pinctrl: qcom/lpi: Convert to platform remove callback returning void
...
Pull SoC DT updates from Arnd Bergmann:
"There are a couple new SoCs that are supported for the first time:
- AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
cores
- Sophgo makes RISC-V based chips, and we now support the CV1800B
chip used in the milkv-duo board and the massive sg2042 chip in the
milkv-pioneer, a 64-core developer workstation.
- Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
7c and gets added with some Xiaomi phones
- Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
and the RZ/G3S (R9A08G045) embedded SoC.
There are also a bunch of newly supported machines that use already
supported chips. On the 32-bit side, we have:
- USRobotics USR8200 is a NAS/Firewall/router based on the ancient
Intel IXP4xx platform
- A couple of machines based on the NXP i.MX5 and i.MX6 platforms
- One machine each for Allwinner V3s, Aspeed AST2600, Microchip
sama5d29 and ST STM32mp157
The other ones all use arm64 cores on chips from allwinner, amlogic,
freescale, mediatek, qualcomm and rockchip"
* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
arm64: dts: socionext: add missing cache properties
riscv: dts: thead: convert isa detection to new properties
arm64: dts: Update cache properties for socionext
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
arm64: dts: ti: k3-am62p: Add nodes for more IPs
arm64: dts: rockchip: Add Turing RK1 SoM support
dt-bindings: arm: rockchip: Add Turing RK1
dt-bindings: vendor-prefixes: add turing
arm64: dts: rockchip: Add DFI to rk3588s
arm64: dts: rockchip: Add DFI to rk356x
arm64: dts: rockchip: Always enable DFI on rk3399
...
This pull request contains Broadcom ARM-based SoCs changes for 6.7,
please pull the following:
- Rafal makes a number of updates to the BCM5301X (Northstar) SoCs DTS
to set MAC addresses for D-LInk DIR-885L, Asus, RT-AC87U, he
relicenses parts of the DTSI to GPL 2.0+ / MIT, and finally fixes a
number of Ethernet switch ports properties to enable/disable ports
adequately.
* tag 'arm-soc/for-6.7/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
Link: https://lore.kernel.org/r/20231024155927.977263-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v6.7, part two
Two minor improvements for Midas boards (Exynos4412, e.g. Samsung Galaxy S3):
1. Correct the middle hardware key to emit KEY_OK instead of KEY_MENU,
because there is already separate touchkey providing KEY_MENU and
both label and node name suggests this should be KEY_OK.
2. Use defines for other key input constants.
* tag 'samsung-dt-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: use Linux event codes for input keys
ARM: dts: samsung: exynos4412-midas: fix key-ok event code
Link: https://lore.kernel.org/r/20231024132615.65609-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ports 5 and 7 are disabled by default because the standard use case is
for port 8 to manage all CPU directed traffic. For experimentation
purposes however it is desirable to provide adequate properties such
that people can experiment with using different ports without having to
figure out their configuration. Some of the use cases include but are
not limited to doubling or tripling the bandwidth by leveraging the
additional ports/Ethernet MAC combinations.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
When redescribing ports I assumed that missing "label" (like "cpu")
means switch port isn't used. That was incorrect and I realized my
change made Linux always use the first (5) CPU port (there are 3 of
them).
While above should technically be possible it often isn't correct:
1. Non-default switch ports are often connected to Ethernet interfaces
not fully covered by vendor setup (they may miss MACs)
2. On some devices non-default ports require specifying fixed link
This fixes network connectivity for some devices. It was reported &
tested for Netgear R8000. It also affects Linksys EA9200 with its
downstream DTS.
Fixes: ba4aebce23 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20231013103314.10306-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Someone resurrected a rk3128 board and provided actual SMP support
for it. Of course firmware for that SoC does not come with TF-A so
it's the old-style SMP the older arm32 Rockchip SoCs use.
And additionally the rv1126 got pwm support.
* tag 'v6.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Switch to operating-points-v2 for RK3128's CPU
ARM: dts: rockchip: Enable SMP bring-up for RK3128
ARM: dts: rockchip: Add CPU resets for RK3128
ARM: dts: rockchip: Add SRAM node for RK3128
ARM: dts: rockchip: Enable pwm fan for edgeble-neu2
ARM: dts: rockchip: Add pwm11 node to rv1126
ARM: dts: rockchip: Add pwm11m0 pins to rv1126
ARM: dts: rockchip: Add pwm2 node to rv1126
ARM: dts: rockchip: Add pwm2m0 pins to rv1126
dt-bindings: pwm: rockchip: Document rv1126-pwm
Link: https://lore.kernel.org/r/2167992.Mh6RI2rZIc@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few minor fixes for omaps
Regression fixes for mcbsp audio clock, and for ams-delta modem. And two
warning fixes. These all can be merged whenever and are not urgent by any
means. Feel free to defer to the merge window unless other fixes are still
pending.
* tag 'omap-fixes-audio-clock-and-modem-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
Link: https://lore.kernel.org/r/pull-1697606314-911862@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I2S pinctrl fixes, someone resurrected the rk3128 arm32 and found some
needed fixes and finally some sound fixes for the px30 ringneck som.
* tag 'v6.6-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
Link: https://lore.kernel.org/r/1965242.usQuhbGJ8B@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM DeviceTree updates for v6.7
RPM master stats is introduced for MSM8226 and MSM8974. The PCIe PHY of
SDX55 is transitioned to the new binding. The hall sensor on the Samsung
Galaxy Tab 4 is inverted.
A number of fixes reported from DeviceTree validation are fixed.
* tag 'qcom-dts-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq8064: move keys and leds out of soc node
ARM: dts: qcom: mdm9615: populate vsdcc fixed regulator
ARM: dts: qcom: apq8060: drop incorrect regulator-type
ARM: dts: qcom: apq8064: drop incorrect regulator-type
ARM: dts: qcom: sdx65: fix SDHCI clocks order
ARM: dts: qcom: apq8064: drop label property from DSI
ARM: qcom: msm8974: Add rpm-master-stats node
ARM: qcom: msm8226: Add rpm-master-stats node
ARM: dts: qcom: apq8026-samsung-matisse-wifi: Fix inverted hall sensor
ARM: dts: qcom: drop incorrect cell-index from SPMI
ARM: dts: qcom-sdx55: switch PCIe QMP PHY to new style of bindings
Link: https://lore.kernel.org/r/20231015204558.855987-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DeviceTree updates for v6.7
The SM7125 platform is introduced, with support for Xiaomi Redmi Note 9
Pro. Support for Fairphone 5, on QCM6490, and BQ Aquaris M5, on MSM8939,
are introduced.
With the various QMP PHY bindings having been refactored, SC7180,
SC7280, SDM845, SM8150, and SM8250 are transitioned to the new USB/DP
combo PHY binding. IPQ6018, IPQ8074 MSM8998, SC7280, SC8180X, SDM845,
SM8150, SM8250, and SM8450 are transitioned to the new PCIe PHY binding,
and SC8180X is transitioned to the new UFS phy binding.
The UFS power supply situation is clarified, and a range of boards
across MSM8996, MSM8998, SM4250, SM6115, SM6125, SM8350, SM8450, and
SM8550 receives corrections for this.
On IPQ5018 watchdog support is introduced, and the SCM driver has SDI
(debug image) enabled - so that it can be disabled. On IPQ5332 USB is
enabled. The hwspinlock identifier is corrected across IPQ5332, IPQ6018,
IPQ8074 and IPQ9574.
The reserved-memory ranges for the remoteprocs on MSM8916 boards are
refactored, to reduce the amount of duplicated boilerplate definitions.
A number of nodes are transitioned to be disabled by default, to
facilitate new boards.
Samsung Galaxy Tab A 8.0 and Samsung Galaxy Tab A 9.7 gains display
support, and the latter capacitive keys. Samsung Galaxy J5 gains
accelerometer support. The Dragonboard 410c gains missing ADC7533
regulator definition, and an overlay forcing the board to operate in
host mode, for automation purposes.
On MSM8976, the outgoing IPC bits for modem and wcss are corrected, and
reserved-memory regions are updated.
Incorrect reserved-memory regions are also corrected for MSM8992 and
MSM8994 devices.
The QRB2210 RB1 board gets debug UART moved per hardware update.
regulator voltage ranges are corrected, remoteprocs are enabled, USB
SuperSpeed PHY is enabled, and GPIO LEDs are introduced for Bluetooth,
WiFi and a user LED.
Interrupts are described for the SGMII PHYs on SA8775P Ride platform,
and the inline crypto engine is introduced for UFS.
On SC7180 the audio DSP remoteproc is introduced. Additional SKUs of the
Lazor boards are added.The RT5682 audio codec part is reorganized to be
easier to maintain. On Trogdor devices, the touchscreen and display
panels are linked to improve the power cycling behavior across the two.
On SC7280 the cpuidle states are rewritten to support OS-initiated PCSI
mode. LMH interrupts are added, to receive feedback when throttling
occurs. The embedded usb debugger (EUD) description and the dummy
usb-c-connector node is removed, as this is not correctly described. The
USB3 pipe clock input of the global clock controller is properly
described.
Modem remoteproc is introduced on SDM630, and the SDM670 PDC mapping is
corrected.
On the SDM845 MTP PCIe support is introduced. The volumn down and reset
buttons are defined. Remoteproc firmware names and the WiFI
configuration is corrected.
On Sony Xperia XZ2, XZ2 Compact, and XZ3 GPIO lines names are provided
for TLMM and PMICs. The camera regulators are also added.
Display hardware blocks are added to SM6125, and enabled on Sony Xperia
10 II.
The ref clock is wired up to PCIe PHY on SM8150.
On SM8250/QRB5165, and the RB5 board, the DisplayPort controller and the
TCPM is introduced, with all the plumbing to get USB role and
orientation switching, as well as DisplayPort altmode to work.
Interconnects and power-domains are also described for the QUPs on this
platform.
Previously ignored PMICs are described for the SM8350 Hardware
Development Kit (HDK), and PMR735a regulators are introduced. The
pinctrl state for uart18 is corrected.
On SM8450 HDK audio routes are corrected, to enable the analog
microphones on the board. The addition of the PRNG is reverted, in favor
of an upcoming additon of a true RNG.
Constants are replaced with QCOM_SCM_VMID_* defines on a variety of
boards.
The SM8550 QRD board gets Bluetooth support, and the camera clock
controller is described.
Additionally, a number of fixes are introduced in a variety of platforms
and boards, to align with Devicetree bindings.
* tag 'qcom-arm64-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (148 commits)
arm64: dts: qcom: apq8016-sbc: Add missing ADV7533 regulators
ARM: dts: qcom: sdx65-mtp: Specify PM7250B SID to use
arm64: dts: qcom: apq8016-sbc: Add overlay for usb host mode
arm64: dts: qcom: qcm6490: Add device-tree for Fairphone 5
dt-bindings: arm: qcom: Add QCM6490 Fairphone 5
arm64: dts: qcom: pm8350c: Add flash led node
arm64: dts: qcom: pm7250b: make SID configurable
arm64: dts: qcom: sc7280: Mark some nodes as 'reserved'
arm64: dts: qcom: msm8939: Fix iommu local address range
arm64: dts: qcom: ipq5018: indicate that SDI should be disabled
arm64: dts: qcom: msm8976: Fix ipc bit shifts
arm64: dts: qcom: msm8976: Split lpass region
arm64: dts: qcom: pm8150l: Add wled node
arm64: dts: qcom: sa8775p: enable the inline crypto engine
arm64: dts: qcom: msm8916/39: Fix venus memory size
arm64: dts: qcom: msm8916/39: Move mpss_mem size to boards
arm64: dts: qcom: msm8916/39: Disable unneeded firmware reservations
arm64: dts: qcom: msm8939: Reserve firmware memory dynamically
arm64: dts: qcom: msm8916: Reserve MBA memory dynamically
arm64: dts: qcom: msm8916: Reserve firmware memory dynamically
...
Link: https://lore.kernel.org/r/20231015191107.854658-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX ARM device tree changes for 6.7:
- New board support: Variscite VAR-SOM-MX6 SoM and Custom board.
- A bunch of dt-schema check fixes from Fabio Estevam.
- A couple of MBA6ULX changes from Alexander Stein that marks gpio-buttons
as wakeup-source and improves gpio-keys button node names.
- Add ATM0700D4 panel support for sk-imx53 board.
- Correct regulator node name for imx6qdl-nitrogen6 board.
- A couple of Gateworks i.MX6QDL board update: adding MDIO nodes and
populating Ethernet MAC address.
* tag 'imx-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (31 commits)
ARM: dts: imx7d-pico-pi: Disable USDHC1
ARM: dts: imx28: Fix dcp compatible
ARM: dts: imx7s: Remove #power-domain-cells from gpcv2
ARM: dts: imx25: Remove clock-names from the watchdog
ARM: dts: imx25: Fix sram node
ARM: dts: imx25: Fix dryice node
ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrs
ARM: dts: vfxxx: Write dmas in a single line
ARM: dts: imx27-phytec: Use eeprom as the node name
ARM: dts: imx51: Remove invalid sahara compatible
ARM: dts: imx53: Adjust the ecspi compatible
ARM: dts: imx7ulp: Fix usbphy1 compatible
ARM: dts: imx6q-pistachio: Use a valid value for fsl,tx-d-cal
ARM: dts: imx6q-b650v3: Fix fsl,tx-cal-45-dn-ohms
ARM: dts: imx28-tx28: Move phy_type to USB node
ARM: dts: mxs: Switch to #pwm-cells = <3>
ARM: dts: imx6q: Add Variscite MX6 Custom board support
ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM support
ARM: dts: mxs: Fix duart clock-names
ARM: dts: imx6ull/7d-colibri: Fix compatible
...
Link: https://lore.kernel.org/r/20231015132300.2268016-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v6.7-rc1
Contains a small fix that drops an unnecessary unit-address.
* tag 'tegra-for-6.7-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Drop unit-address from parallel RGB output port
Link: https://lore.kernel.org/r/20231013153723.1729109-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.7 (take two)
- Improve audio clock accuracy on the RZ/{G2L,G2LC,V2L} SMARC EVK
development boards,
- Add FLASH support for the Renesas Bock-W development board,
- Add L2 cache and non-coherent DMA support on the RZ/Five SoC and the
RZ/Five SMARC development board,
- Add initial support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and
SMARC Carrier-II EVK development boards,
- Add initial support for the R8A779F4 variant of the R-Car S4-8 SoC
and the R-Car S4 Starter Kit development board,
- Apply DT overlays to base DTBs to improve validation and usability.
* tag 'renesas-dts-for-v6.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (25 commits)
arm64: dts: renesas: Apply overlays to base dtbs
arm64: dts: renesas: rzg3s-smarc-som: Spelling s/device-type/device_type/
arm64: dts: renesas: r9a08g045: Add missing cache-level for L3 cache
arm64: dts: renesas: r9a08g045: Add nodes for SDHI1 and SDHI2
arm64: dts: renesas: ebisu: Document Ebisu-4D support
arm64: dts: renesas: Add R-Car S4 Starter Kit support
arm64: dts: renesas: Add Renesas R8A779F4 SoC support
arm64: dts: renesas: Add initial device tree for RZ/G3S SMARC EVK board
arm64: dts: renesas: Add initial device tree for RZ SMARC Carrier-II Board
arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM
arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC
riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled
riscv: dts: renesas: r9a07g043f: Add dma-noncoherent property
riscv: dts: renesas: r9a07g043f: Add L2 cache node
ARM: dts: renesas: bockw: Add FLASH node
arm64: dts: renesas: rz-smarc: Use versa3 clk for audio mclk
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3S SoC
clk: tegra: fix error return case for recalc_rate
clk: si521xx: Fix regmap write accessor
clk: si521xx: Use REGCACHE_FLAT instead of NONE
...
Link: https://lore.kernel.org/r/cover.1697200123.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STi DT for v6.7, round 1 :
stih418-b2264: leds and serial fixes
stih407: drop max-duty-cycle property
stih415/416: remove boards from yaml
stih407/410/418: add boards to yaml
* tag 'sti-dt-for-v6.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
dt-bindings: arm: sti: add STi boards and remove stih415/stih416
dt-bindings: soc: sti: add STi platform syscon
ARM: dts: st: correct led level in stih418-b2264.dts
ARM: dts: st: move leds out of soc in stih418-b2264.dts
ARM: dts: st: correct serial alias in stih418-b2264.dts
ARM: dts: st: stih407: drop max-duty-cycle
Link: https://lore.kernel.org/r/e6b975f2-9936-465a-8253-6fcead974006@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v6.7 merge window
Two non-urgent devicetree fixes for am371-evm led pinmux and a node name
warning fix for omap4-epson-embt2ws, and updates for connected devices for
various devices:
- Device updates and enabling of pru support for am335x-pocketbeagle
- Few more devices such as leds and iio for omap4-epson-embt2ws
- Ethernet and led updates for am3517-evm
- Modem sleep pins configuration for motorola-mapphone
* tag 'omap-for-v6.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-embt2ws: Fix pinctrl single node name warning
ARM: dts: motorola-mapphone: Add mdm6600 sleep pins
ARM: dts: am3517: Configure ethernet alias
ARM: dts: am3517-evm: Enable Ethernet PHY Interrupt
ARM: dts: am3517-evm: Fix LED3/4 pinmux
ARM: dts: omap3-gta04: Drop superfluous omap36xx compatible
ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
ARM: dts: omap: omap4-embt2ws: Let IMU driver handle Magnetometer internally
ARM: dts: am335x-pocketbeagle: add missing GPIO mux
ARM: dts: am335x-pocketbeagle: enable pru
ARM: dts: am335x-pocketbeagle: remove dependency cycle
ARM: dts: am335x-pocketbeagle: update LED information
ARM: dts: omap4: embt2ws: add LED
Link: https://lore.kernel.org/r/pull-1697010475-119828@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip AT91 device tree updates for 6.7
It contains:
- the new Microchip SAMA5D29 Curiosity board
- a typo fix in TDES node name for SAMA5D4 dtsi
- enablement of RTT as RTC for SAM9X60 Curiosity board
* tag 'at91-dt-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTT
ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity board
dt-bindings: ARM: at91: Document Microchip SAMA5D29 Curiosity
ARM: dts: at91/trivial: fix typo in crypto DT naming
Link: https://lore.kernel.org/r/20231010045955.1259843-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some IXP4xx updates for the v6.7 kernel cycle:
- Provide proper bindings including missing vendor prefixes
for the device trees in use and one more new vendor.
- Add a device tree for USRobotics USR8200 which has two
active users.
- Augment the "reset" GPIO buttons to send KEY_RESTART as
appropriate.
- Enable write on the NSLU2 flash so we get a writeable
rootfs on this device.
* tag 'ixp4xx-for-soc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ixp4xx: Use right restart keycode
ARM: dts: ixp4xx-nslu2: Enable write on flash
ARM: dts: ixp4xx: Add USRobotics USR8200 device tree
ARM: dts: Use only the Linksys compatible for now
dt-bindings: arm: List more IXP4xx devices
dt-bindings: Add vendor prefixes
Link: https://lore.kernel.org/r/CACRpkdZZ6W8uic97S9=Aa+S+s0-0k50TDw1e00u6gFcQfAVDdw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue
similar to omap4. On omap5, there is no mcbsp4 instance on the l4_per
interconnect.
Fixes: b1da0fa21b ("ARM: OMAP2+: Drop legacy platform data for omap5 mcbsp")
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We are using a wrong mcbsp functional clock. The interconnect target module
driver provided clock for mcbsp is not same as the mcbsp functional clock
known as the gfclk main_clk. The mcbsp functional clocks for mcbsp should
have been added before we dropped the legacy platform data.
Additionally we are also missing the clock aliases for the clocks used by
the audio driver if reparenting is needed. This causes audio driver errors
like "CLKS: could not clk_get() prcm_fck" for mcbsp as reported by Andreas.
The mcbsp clock aliases too should have been added before we dropped the
legacy platform data.
Let's add the clocks and aliases with a single patch to fix the issue.
Fixes: 349355ce3a ("ARM: OMAP2+: Drop legacy platform data for omap4 mcbsp")
Reported-by: Andreas Kemnade <andreas@kemnade.info>
Reported-by: Péter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The state of the green led on the stih418-b2264 is currently
inverted. Correct this by fixing the GPIO active state.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move the leds node out of the soc section
and correct the following warning:
Warning (simple_bus_reg): /soc/leds: missing or empty reg/ranges property
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Aliases should only contain lowercase, digits or - hence
correct the alias for the serial from ttyAS0 into serial0
as already done for the other boards.
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
"max-duty-cycle" property was removed in the commit f747a1fe78
("regulator: pwm-regulator: Remove obsoleted property"):
stih418-b2199.dtb: pwm-regulator: Unevaluated properties are not allowed ('max-duty-cycle' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Minor improvements in ARM DTS for v6.7
Few cleanups and improvements: split joined reg entries for Ethernet in
omap3-devkit8000, add missing spaces before '{' (MediaTek, Nuvoton) and
cleanup whitespace around '=' (MediaTek).
* tag 'dt-cleanup-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: nuvoton: add missing space before {
ARM: dts: mediatek: minor whitespace cleanup around '='
ARM: dts: mediatek: add missing space before {
ARM: dts: omap3-devkit8000: correct ethernet reg addresses (split)
Link: https://lore.kernel.org/r/20231006092823.94839-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the following W=1 build warning:
"Warning (unit_address_vs_reg): /host1x@50000000/dc@54200000/rgb/port@0:
node has a unit name, but no reg or ranges property"
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The imx7d-pico-pi board does not have an SD card slot
connected to the USDHC1 port. Only eMMC and Wifi SDIO ports
are used.
Disable the USDHC1 node.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl-dcp.yaml, passing "fsl,imx28-dcp", "fsl,imx23-dcp" is not
valid.
Change it to pass only "fsl,imx28-dcp" to fix the following
schema warning:
crypto@80028000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx28-dcp', 'fsl,imx23-dcp'] is too long
'fsl,imx28-dcp' is not one of ['fsl,imx6sl-dcp', 'fsl,imx6ull-dcp']
'fsl,imx28-dcp' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl,imx-gpcv2.yaml, '#power-domain-cells' is not a valid
property for the top-level gpcv2 node. It is only valid
for its children nodes.
Remove it to fix the following schema warning:
gpc@303a0000: '#power-domain-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/power/fsl,imx-gpcv2.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
