Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
To increase code coverage, extend the ovpn selftests with the following
cases:
* connect UDP peers using a mix of IPv6 and IPv4 at the transport layer
* run full test with tunnel MTU equal to transport MTU (exercising
IP layer fragmentation)
* ping "LAN IP" served by VPN peer ("LAN behind a client" test case)
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
getaddrinfo() may fail with error code different from EAI_FAIL
or EAI_NONAME, however in this case we still try to free the
results object, thus leading to a crash.
Fix this by bailing out on any possible error.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch bareudp testing to use setup_ns, which sets up rp_filter by default.
This allows us to remove the manual rp_filter configuration from the script.
Additionally, since setup_ns handles namespace naming and cleanup, we no
longer need a separate cleanup function. We also move the trap setup earlier
in the script, before the test setup begins.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508081910.84216-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some distributions enable rp_filter globally by default. To ensure consistent
behavior across environments, we explicitly disable it in several test cases.
This patch moves the rp_filter disabling logic to immediately after the
network namespace is initialized. With this change, individual test cases
with creating namespace via setup_ns no longer need to disable rp_filter
again.
This helps avoid redundancy and ensures test consistency.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508081910.84216-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Below are the tests added for Indirect Target Selection (ITS):
- its_sysfs.py - Check if sysfs reflects the correct mitigation status for
the mitigation selected via the kernel cmdline.
- its_permutations.py - tests mitigation selection with cmdline
permutations with other bugs like spectre_v2 and retbleed.
- its_indirect_alignment.py - verifies that for addresses in
.retpoline_sites section that belong to lower half of cacheline are
patched to ITS-safe thunk. Typical output looks like below:
Site 49: function symbol: __x64_sys_restart_syscall+0x1f <0xffffffffbb1509af>
# vmlinux: 0xffffffff813509af: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb1509af: jmpq *%rax
# ITS thunk NOT expected for site 49
# PASSED: Found *%rax
#
Site 50: function symbol: __resched_curr+0xb0 <0xffffffffbb181910>
# vmlinux: 0xffffffff81381910: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb181910: jmp 0xffffffffc02000fc
# ITS thunk expected for site 50
# PASSED: Found 0xffffffffc02000fc -> jmpq *%rax <scattered-thunk?>
- its_ret_alignment.py - verifies that for addresses in .return_sites
section that belong to lower half of cacheline are patched to
its_return_thunk. Typical output looks like below:
Site 97: function symbol: collect_event+0x48 <0xffffffffbb007f18>
# vmlinux: 0xffffffff81207f18: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f18: jmp 0xffffffffbbd5b560
# PASSED: Found jmp 0xffffffffbbd5b560 <its_return_thunk>
#
Site 98: function symbol: collect_event+0xa4 <0xffffffffbb007f74>
# vmlinux: 0xffffffff81207f74: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f74: retq
# PASSED: Found retq
Some of these tests have dependency on tools like virtme-ng[1] and drgn[2].
When the dependencies are not met, the test will be skipped.
[1] https://github.com/arighi/virtme-ng
[2] https://github.com/osandov/drgn
Co-developed-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Added new test cases for FQ, FQ_CODEL, FQ_PIE, and HHF qdiscs to verify queue
trimming behavior when the qdisc limit is dynamically reduced.
Each test injects packets, reduces the qdisc limit, and checks that the new
limit is enforced. This is still best effort since timing qdisc backlog
is not easy.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert fbbf93556f ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc5439 ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reports test failures on debug kernel:
FAIL: proc inconsistency after uniq filter for ...
This is because entries are expiring while validation is happening.
Increase the timeout of ctnetlink injected entries and the
icmp (ping) timeout to 1h to avoid this.
To reduce run-time, add less entries via ctnetlink when KSFT_MACHINE_SLOW
is set.
also log of a failed run had:
PASS: dump in netns had same entry count (-C 0, -L 0, -p 0, /proc 0)
... i.e. all entries already expired: add a check and set failure if
this happens.
While at it, include a diff when there were duplicate entries and add
netns name to error messages (it tells if icmp or ctnetlink failed).
Fixes: d33f889fd8 ("selftests: netfilter: add conntrack stress test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250506061125.1a244d12@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250507075000.5819-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com
Fixes: 46036188ea ("selftests/mm: build with -O2")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 50910acd6f ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com
Fixes: 50910acd6f ("selftests/mm: use sys_pkey helpers consistently")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Apparently, nf_conntrack_bridge changes the way in which fragments
are handled, dealing to packet drop. From Huajian Yang.
2) Add a selftest to stress the conntrack subsystem, from Florian Westphal.
3) nft_quota depletion is off-by-one byte, Zhongqiu Duan.
4) Rewrites the procfs to read the conntrack table to speed it up,
from Florian Westphal.
5) Two patches to prevent overflow in nft_pipapo lookup table and to
clamp the maximum bucket size.
6) Update nft_fib selftest to check for loopback packet bypass.
From Florian Westphal.
netfilter pull request 25-05-06
* tag 'nf-next-25-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: nft_fib.sh: check lo packets bypass fib lookup
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
netfilter: nft_set_pipapo: prevent overflow in lookup table allocation
netfilter: nf_conntrack: speed up reads from nf_conntrack proc file
netfilter: nft_quota: match correctly when the quota just depleted
selftests: netfilter: add conntrack stress test
netfilter: bridge: Move specific fragmented packet to slow_path instead of dropping it
====================
Link: https://patch.msgid.link/20250505234151.228057-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ksft runner sends 2 SIGTERMs in a row if a test runs out of time.
Handle this in a similar way we handle SIGINT - cleanup and stop
running further tests.
Because we get 2 signals we need a bit of logic to ignore
the subsequent one, they come immediately one after the other
(due to commit 9616cb34b0 ("kselftest/runner.sh: Propagate SIGTERM
to runner child")).
This change makes sure we run cleanup (scheduled defer()s)
and also print a stack trace on SIGTERM, which doesn't happen
by default. Tests occasionally hang in NIPA and it's impossible
to tell what they are waiting from or doing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250503011856.46308-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the test result does not differentiate between the cases when
either one of the address families are configured or if both the address
families are configured. Ideally, the result should report if a
particular case was skipped.
./drivers/net/ping.py
TAP version 13
1..7
ok 1 ping.test_default_v4 # SKIP Test requires IPv4 connectivity
ok 2 ping.test_default_v6
ok 3 ping.test_xdp_generic_sb
ok 4 ping.test_xdp_generic_mb
ok 5 ping.test_xdp_native_sb
ok 6 ping.test_xdp_native_mb
ok 7 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:2 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a system with either of the ipv4 or ipv6 information missing, tests
are currently skipped. Ideally, the test should run as long as at least
one address family is present. This patch make test run whenever
possible.
Before:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default
ok 2 ping.test_xdp_generic_sb
ok 3 ping.test_xdp_generic_mb
ok 4 ping.test_xdp_native_sb
ok 5 ping.test_xdp_native_mb
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:1 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250503013518.1722913-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The `get_interface_info` call has ip version hard-coded which leads to
failures on an IPV6 system. The NetDrvEnv class already gathers
information about remote interface, so instead of fixing the local
implementation switch to using cfg.remote_ifname.
Before:
./drivers/net/ping.py
Traceback (most recent call last):
File "/new_tests/./drivers/net/ping.py", line 217, in <module>
main()
File "/new_tests/./drivers/net/ping.py", line 204, in main
get_interface_info(cfg)
File "/new_tests/./drivers/net/ping.py", line 128, in get_interface_info
raise KsftFailEx('Can not get remote interface')
net.lib.py.ksft.KsftFailEx: Can not get remote interface
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Note: This patch was originally applied as commit 6f50175cca ("selftests:
Add IPv6 link-local address generation tests for GRE devices.").
However, it was then reverted by commit 355d940f4d ("Revert "selftests:
Add IPv6 link-local address generation tests for GRE devices."")
because the commit it depended on was going to be reverted. Now that
the situation is resolved, we can add this selftest again (no changes
since original patch, appart from context update in
tools/testing/selftests/net/Makefile).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/2c3a5733cb3a6e3119504361a9b9f89fda570a2d.1746225214.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up two build warnings:
[1]
iou-zcrx.c: In function ‘process_recvzc’:
iou-zcrx.c:263:37: warning: too many arguments for format [-Wformat-extra-args]
263 | error(1, 0, "payload mismatch at ", i);
| ^~~~~~~~~~~~~~~~~~~~~~
[2] Use "%zd" for ssize_t type as better
iou-zcrx.c: In function ‘run_client’:
iou-zcrx.c:357:47: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
357 | error(1, 0, "send(): %d", sent);
| ~^ ~~~~
| | |
| int ssize_t {aka long int}
| %ld
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250502175136.1122-1-haiyuewa@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds 'get_subflow_info' in 'mptcp_diag', which can check whether
a TCP connection is an MPTCP subflow based on the "INET_ULP_INFO_MPTCP"
with tcp_diag method.
The helper 'print_subflow_info' in 'mptcp_diag' can print the subflow_filed
of an MPTCP subflow for further checking the 'subflow_info' through
inet_diag method.
The example of the whole output should be:
$ ./mptcp_diag -s "127.0.0.1:10000 127.0.0.1:38984"
127.0.0.1:10000 -> 127.0.0.1:38984
It's a mptcp subflow, the subflow info:
flags:Mec token:0000(id:0)/4278e77e(id:0) seq:9288466187236176036 \
sfseq:1 ssnoff:2317083055 maplen:215
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-6-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the '__u32 proto' variable to the 'send_query' and
'recv_nlmsg' functions for further extending function.
In the 'send_query' function, the inclusion of this variable makes the
structure clearer and more readable.
In the 'recv_nlmsg' function, the '__u32 proto' variable ensures that
the 'diag_info' field remains unmodified when processing IPPROTO_TCP data,
thereby preventing unintended transformation into 'mptcp_info' format.
While at it, increment iovlen directly when an item is added to simplify
this portion of the code and improve its readaility.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-5-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
