Pull rdma updates from Jason Gunthorpe:
"Seveal fixes scattered across the drivers and a few new features:
- Minor updates and bug fixes to hfi1, efa, iopob, bnxt, hns
- Force disassociate the userspace FD when hns does an async reset
- bnxt new features for optimized modify QP to skip certain stayes,
CQ coalescing, better debug dumping
- mlx5 new data placement ordering feature
- Faster destruction of mlx5 devx HW objects
- Improvements to RDMA CM mad handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (51 commits)
RDMA/bnxt_re: Correct the sequence of device suspend
RDMA/bnxt_re: Use the default mode of congestion control
RDMA/bnxt_re: Support different traffic class
IB/cm: Rework sending DREQ when destroying a cm_id
IB/cm: Do not hold reference on cm_id unless needed
IB/cm: Explicitly mark if a response MAD is a retransmission
RDMA/mlx5: Move events notifier registration to be after device registration
RDMA/bnxt_re: Cache MSIx info to a local structure
RDMA/bnxt_re: Refurbish CQ to NQ hash calculation
RDMA/bnxt_re: Refactor NQ allocation
RDMA/bnxt_re: Fail probe early when not enough MSI-x vectors are reserved
RDMA/hns: Fix different dgids mapping to the same dip_idx
RDMA/bnxt_re: Add set_func_resources support for P5/P7 adapters
RDMA/bnxt_re: Enhance RoCE SRIOV resource configuration design
bnxt_en: Add support for RoCE sriov configuration
RDMA/hns: Fix NULL pointer derefernce in hns_roce_map_mr_sg()
RDMA/hns: Fix out-of-order issue of requester when setting FENCE
RDMA/nldev: Add IB device and net device rename events
RDMA/mlx5: Add implementation for ufile_hw_cleanup device operation
RDMA/core: Move ib_uverbs_file struct to uverbs_types.h
...
When in fatal error condition, mark device as detached first
and then complete all pending HWRM commands as firmware is not
going to process them and eventually time out. Move the device
to error only if suspend is called when device is in Fatal state.
Also, remove some outdated comments. Remove the stop_irq call
which is no longer required.
Fixes: cc5b9b48d4 ("RDMA/bnxt_re: Recover the device when FW error is detected")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1731660464-27838-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There are few use cases where CQ create and destroy
is seen before re-creating the CQ, this kind of use
case is disturbing the RR distribution and all the
active CQ getting mapped to only 2 NQ alternatively.
Fixing the CQ to NQ hash calculation by implementing
a quick load sorting mechanism under a mutex.
Using this, if the CQ was allocated and destroyed
before using it, the nq selecting algorithm still
obtains the least loaded CQ. Thus balancing the load
on NQs.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/1731577748-1804-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If bnxt_re_add_device() fails, 'en_info' still needs to be freed, as
already done in the .remove() function.
The commit in Fixes incorrectly removed this call, certainly because it
was expecting the .remove() function was called anyway. But if the probe
fails, the remove function is not called.
There is no need to call bnxt_re_remove() as it was done before, kfree()
is enough.
Fixes: a5e099e0c4 ("RDMA/bnxt_re: Fix an error path in bnxt_re_add_device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/9e48ff955ae55fc39a9eb1eb590d374539eab5ba.1730477345.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently the CQ toggle value in the shared page (read by the userlib) is
updated as part of the cqn_handler. There is a potential race of
application calling the CQ ARM doorbell immediately and using the old
toggle value.
Change the sequence of updating CQ toggle value to update in the
bnxt_qplib_service_nq function immediately after reading the toggle value
to be in sync with the HW updated value.
Fixes: e275919d96 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://patch.msgid.link/r/1728373302-19530-9-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.
Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy.
Fixes: 2ad4e6303a ("RDMA/bnxt_re: Implement doorbell pacing algorithm")
Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info to arm the SRQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the SRQ structure from the SRQ ID.
SRQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per SRQ. This
can be optimized to enable multiple SRQs from the same
application share the same page and different offsets
in the page
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Variable size WQE means that each send Work Queue Entry to HW can use
different WQE sizes as opposed to the static WQE size on the current
devices. Set variable WQE mode for Gen P7 devices. Depth of the Queue will
be a multiple of slot which is 16 bytes. The number of slots should be a
multiple of 256 as per the HW requirement.
Initialize the Software shadow queue to hold requests equal to the number
of slots. Also, do not expose the variable size WQE capability until the
last patch in the series.
Link: https://patch.msgid.link/r/1724042847-1481-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info during the request notify call back to arm the CQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the CQ structure from the CQ ID.
CQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per CQ. This
can be optimized to enable multiple CQs from the same
application share the same page and different offsets
in the page.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1702535484-26844-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/infiniband/hw/bnxt_re/main.c:1114:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
1114 | default:
| ^
drivers/infiniband/hw/bnxt_re/main.c:1114:2: note: insert 'break;' to avoid fall-through
1114 | default:
| ^
| break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1950
Fixes: b02fd3f79e ("RDMA/bnxt_re: Report async events and errors")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231020-bnxt_re-implicit-fallthrough-v1-1-b5c19534a6c9@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:
- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma,
mthca, hns, and bnxt_re
- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager
- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to
allow userspace to slow down the doorbell rings if the HW gets full
- irdma egress VLAN priority, better QP/WQ sizing
- rxe bug fixes in queue draining and srq resizing
- Support more ethernet speed options in the core layer
- DMABUF support for bnxt_re
- Multi-stage MTT support for erdma to allow much bigger MR
registrations
- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits)
IB/hfi1: Reduce printing of errors during driver shut down
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
RDMA/hfi1: Use list_for_each_entry() helper
RDMA/mlx5: Fix trailing */ formatting in block comment
RDMA/rxe: Fix redundant break statement in switch-case.
RDMA/efa: Fix wrong resources deallocation order
RDMA/siw: Call llist_reverse_order in siw_run_sq
RDMA/siw: Correct wrong debug message
RDMA/siw: Balance the reference of cep->kref in the error path
Revert "IB/isert: Fix incorrect release of isert connection"
RDMA/bnxt_re: Fix kernel doc errors
RDMA/irdma: Prevent zero-length STAG registration
RDMA/erdma: Implement hierarchical MTT
RDMA/erdma: Refactor the storage structure of MTT entries
RDMA/erdma: Renaming variable names and field names of struct erdma_mem
RDMA/hns: Support hns HW stats
RDMA/hns: Dump whole QP/CQ/MR resource in raw
RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()
RDMA/mlx4: Copy union directly
RDMA/irdma: Drop unused kernel push code
...
