Pull power sequencing fixes from Bartosz Golaszewski:
"There's one fix for an invalid pointer dereference in error path
reported by smatch and two patches that address the noisy config
choices you reported earlier this week.
Summary:
- fix an invalid pointer dereference in error path in pwrseq core
- reduce the Kconfig noise from PCI pwrctl choices"
* tag 'pwrseq-fixes-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
arm64: qcom: don't select HAVE_PWRCTL when PCI=n
Kconfig: reduce the amount of power sequencing noise
power: sequencing: fix an invalid pointer dereference in error path
Pull iommu updates from Will Deacon:
"Core:
- Support for the "ats-supported" device-tree property
- Removal of the 'ops' field from 'struct iommu_fwspec'
- Introduction of iommu_paging_domain_alloc() and partial conversion
of existing users
- Introduce 'struct iommu_attach_handle' and provide corresponding
IOMMU interfaces which will be used by the IOMMUFD subsystem
- Remove stale documentation
- Add missing MODULE_DESCRIPTION() macro
- Misc cleanups
Allwinner Sun50i:
- Ensure bypass mode is disabled on H616 SoCs
- Ensure page-tables are allocated below 4GiB for the 32-bit
page-table walker
- Add new device-tree compatible strings
AMD Vi:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
Arm SMMUv2:
- Print much more useful information on context faults
- Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n
- Add new Qualcomm device-tree bindings
Arm SMMUv3:
- Support for hardware update of access/dirty bits and reporting via
IOMMUFD
- More driver rework from Jason, this time updating the PASID/SVA
support to prepare for full IOMMUFD support
- Add missing MODULE_DESCRIPTION() macro
- Minor fixes and cleanups
NVIDIA Tegra:
- Fix for benign fwspec initialisation issue exposed by rework on the
core branch
Intel VT-d:
- Use try_cmpxchg64() instead of cmpxchg64() when updating pte
- Use READ_ONCE() to read volatile descriptor status
- Remove support for handling Execute-Requested requests
- Avoid calling iommu_domain_alloc()
- Minor fixes and refactoring
Qualcomm MSM:
- Updates to the device-tree bindings"
* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
iommu/vt-d: Fix identity map bounds in si_domain_init()
iommu: Move IOMMU_DIRTY_NO_CLEAR define
dt-bindings: iommu: Convert msm,iommu-v0 to yaml
iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
iommu/of: Support ats-supported device-tree property
dt-bindings: PCI: generic: Add ats-supported property
iommu: Remove iommu_fwspec ops
OF: Simplify of_iommu_configure()
ACPI: Retire acpi_iommu_fwspec_ops()
iommu: Resolve fwspec ops automatically
iommu/mediatek-v1: Clean up redundant fwspec checks
RDMA/usnic: Use iommu_paging_domain_alloc()
wifi: ath11k: Use iommu_paging_domain_alloc()
wifi: ath10k: Use iommu_paging_domain_alloc()
drm/msm: Use iommu_paging_domain_alloc()
vhost-vdpa: Use iommu_paging_domain_alloc()
...
Kconfig will ask the user twice about power sequencing: once for the QCom
WCN power sequencing driver and then again for the PCI power control
driver using it.
Let's automate the selection of PCI_PWRCTL by introducing a new hidden
symbol: HAVE_PWRCTL which should be selected by all platforms that have
the need to include PCI power control code (right now: only ARCH_QCOM).
The pwrseq-based PCI pwrctl driver itself will then be selected by the
drivers binding to devices that may require external handling of the
power-up sequence (currently: ath11k and ath12k) based on the value
of HAVE_PWRCTL.
Make all PCI pwrctl Kconfig symbols hidden so that no questions are
asked during configuration.
Fixes: 4565d2652a ("PCI/pwrctl: Add PCI power control core code")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wjWc5dzcj2O1tEgNHY1rnQW63JwtuZi_vAZPqy6wqpoUQ@mail.gmail.com/
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> # drivers/net/wireless/ath
Link: https://lore.kernel.org/r/20240717142803.53248-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
ath.git patches for v6.11
We have moved to a new group-managed repo, and this is the first pull
request from that repo, and from me. Fingers crossed...
We have some new features in ath12k along with some cleanups in ath11k
and ath12k. Also notable are some device-tree changes to allow certain
ath11k and ath12k devices to work with a new power sequencing
subsystem.
Major changes:
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
Currently, the calculation of the average signal strength in station mode
is incorrect.
This is because before calculating the average signal strength, ath11k need
to determine whether the hardware and firmware support db2dbm, if the
hardware and firmware support db2dbm, do not need to add noise floor,
otherwise, need to add noise floor.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240309121129.5379-1-quic_lingbok@quicinc.com
Currently, the calculation of ack signal strength is incorrect.
This is because before calculating the ack signal strength, ath11k need
to determine whether the hardware and firmware support db2dbm. If the
hardware and firmware support db2dbm, do not need to add noise floor,
otherwise, need to add noise floor.
Besides, the value of ack_rssi passed by firmware to ath11k should be a
signed number, so change its type to s8.
After that, "iw wlan0 station dump" show the correct ack signal strength.
Such as:
root@CDCCSTEX0799733-LIN:~# iw wlp88s0 station dump
Station 00:03:7f:12:df:df (on wlp88s0)
inactive time: 75 ms
rx bytes: 11599
rx packets: 99
tx bytes: 9029
tx packets: 81
tx retries: 4
tx failed: 0
rx drop misc: 2
signal: -16 dBm
signal avg: -24 dBm
tx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4
tx duration: 9230 us
rx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4
rx duration: 7201 us
last ack signal:-23 dBm
avg ack signal: -22 dBm
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240611022550.59078-1-quic_lingbok@quicinc.com
Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key()
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi()
a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers.
This results in unexpected management frame drop in case either of above 3 ciphers
is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211
will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved
is wrong. Such frame is dropped later by hardware:
ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0
ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1
From user point of view, we have observed very low throughput due to this issue:
action frames are all dropped so ADDBA response from DUT never reaches AP. AP
can not use aggregation thus throughput is low.
Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper
MIC length for those ciphers.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Closes: https://lore.kernel.org/all/CADS+iDX5=JtJr0apAtAQ02WWBxgOFEv8G063vuGYwDTC8AVZaw@mail.gmail.com
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605014826.22498-1-quic_bqiang@quicinc.com
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_timeout() causing patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240603091541.8367-2-wsa+renesas@sang-engineering.com
Current documentation on RCU in ath11k_mac_op_ipv6_changed() says:
/* Note: read_lock_bh() calls rcu_read_lock() */
read_lock_bh(&idev->lock);
This is wrong because without enabling CONFIG_PREEMPT_RT
rcu_read_lock() is not called by read_lock_bh(). The reason
why current code works even in a CONFIG_PREEMPT_RT=n kernel
is because atomic_notifier_call_chain() already does that for
us, see:
int atomic_notifier_call_chain()
{
...
rcu_read_lock();
ret = notifier_call_chain(&nh->head, val, v, -1, NULL);
rcu_read_unlock();
...
}
and backtrace:
ath11k_mac_op_ipv6_changed
ieee80211_ifa6_changed
notifier_call_chain
atomic_notifier_call_chain
So update the comment to make it correct.
This is found during code review, compile tested only.
Fixes: feafe59c89 ("wifi: ath11k: use RCU when accessing struct inet6_dev::ac_list")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240531022411.6543-1-quic_bqiang@quicinc.com
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ath.git patches for v6.11
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git fixes for 6.10. Two fixes for user reported regressions in
ath11k. One dependency fix and one error path fix.
Base address of CE ring is defined as u32, currently this works
because coherent DMA mask configured as 32 bit:
#define ATH11K_PCI_COHERENT_DMA_MASK 32
However this mask could be changed once firmware bugs are fixed
to fully support 36 bit DMA addressing. So to protect against any
future changes to the DMA mask, change the type of the fields that
are dependent upon it.
This is found during code review. Compile tested only.
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240524021558.34452-1-quic_bqiang@quicinc.com
With commit bc8a0fac86 ("wifi: mac80211: don't set bss_conf in parsing")
ath11k fails to connect to 6 GHz AP.
This is because currently ath11k checks AP's power type in
ath11k_mac_op_assign_vif_chanctx() which would be called in AUTH stage.
However with above commit power type is not available until ASSOC stage.
As a result power type check fails and therefore connection fails.
Fix this by moving power type check to ASSOC stage, also move regulatory
rules update there because it depends on power type.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: bc8a0fac86 ("wifi: mac80211: don't set bss_conf in parsing")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240424064019.4847-1-quic_bqiang@quicinc.com
WCN6750 firmware crashes because of num_vdevs changed from 4 to 17
in ath11k_init_wmi_config_qca6390() as the ab->hw_params.num_vdevs
is 17. This is caused by commit f019f4dff2 ("wifi: ath11k: support
2 station interfaces") which assigns ab->hw_params.num_vdevs directly
to config->num_vdevs in ath11k_init_wmi_config_qca6390(), therefore
WCN6750 firmware crashes as it can't support such a big num_vdevs.
Fix it by assign 3 to num_vdevs in hw_params for WCN6750 as 3 is
sufficient too.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01371-QCAMSLSWPLZ-1
Fixes: f019f4dff2 ("wifi: ath11k: support 2 station interfaces")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Closes: https://lore.kernel.org/r/D15TIIDIIESY.D1EKKJLZINMA@fairphone.com/
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240520030757.2209395-1-quic_cjhuang@quicinc.com
Instead of passing the full TPE elements, in all their glory
and mixed up data formats for HE backward compatibility, parse
them fully into the right values, and pass that to the drivers.
Also introduce proper validation already in mac80211, so that
drivers don't need to do it, and parse the EHT portions.
The code now passes the values in the right order according to
the channel used by an interface, which could also be a subset
of the data advertised by the AP, if we couldn't connect with
the full bandwidth (for whatever reason.)
Also add kunit tests for the more complicated bits of it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much
sense. Yes, that table has a maximum value of 8, and the
table will actually remain that way, but EHT introduced
a way to encode more levels for 320 MHz channels.
Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being
the only user, add ATH11K_NUM_PWR_LEVELS, where it makes
sense since it cannot support 320 MHz channels.
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org> # xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>
If one of the dummy allocation fails in ath11k_pcic_ext_irq_config(),
the previous allocated devices might leak due to returning without
deallocating the devices.
Instead of returning on the error path, deallocate all the previously
allocated net_devices and then return.
Fixes: bca592ead8 ("wifi: ath11k: allocate dummy net_device dynamically")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240508185902.70975-1-leitao@debian.org
smatch flagged the following issue:
drivers/net/wireless/ath/ath11k/qmi.c:2401 ath11k_qmi_load_file_target_mem() error: uninitialized symbol 'ret'.
The reality is that 'ret' is initialized in every path through
ath11k_qmi_load_file_target_mem() except one, the case where the input
'len' is 0, and hence the "while (remaining)" loop is never entered.
But to make sure this case is also handled, add an initializer to the
declaration of 'ret'.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240504-qmi_load_file_target_mem-v1-2-069fc44c45eb@quicinc.com
If STATUS_BUFFER_DONE is not set for a monitor status ring entry,
we don't process the status ring until STATUS_BUFFER_DONE set
for that status ring entry.
During LMAC reset it may happen that hardware will not write
STATUS_BUFFER_DONE tlv in status buffer, in that case we end up
waiting for STATUS_BUFFER_DONE leading to backpressure on monitor
status ring.
To fix the issue, when HP (Head Pointer) + 1 entry is peeked and if DMA is not
done and if HP + 2 entry's DMA done is set, replenish HP + 1 entry and start
processing in next interrupt. If HP + 2 entry's DMA done is not set, poll onto
HP + 1 entry DMA done to be set.
Also, during monitor attach HP points to the end of the ring and TP (Tail
Pointer) points to the start of the ring. Using ath11k_hal_srng_src_peek() may
result in processing invalid buffer for the very first interrupt. Since, HW
starts writing buffer from TP.
To avoid this issue call ath11k_hal_srng_src_next_peek() instead of
calling ath11k_hal_srng_src_peek().
Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240429073624.736147-1-quic_tamizhr@quicinc.com
Currently, in ath11k_ahb_probe(), if a failure occurs after
ath11k_ahb_ce_remap() is called, and if hw_params->ce_remap is
enabled, the CE register memory is not unmapped. So add a call to
ath11k_ahb_ce_unmap() in the error path.
This issue was identified by smatch/smatch_scripts/kchecker:
drivers/net/wireless/ath/ath11k/ahb.c:1218 ath11k_ahb_probe() warn: 'ab->mem_ce' from ioremap() not released on lines: 1218.
Since this is a rare error path with no simple way to test, and since
the change is trivial to review, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430-ce-unmap-v1-2-e468328f95d9@quicinc.com
Currently the logic that handles hw_params->ce_remap is inline code,
both for doing the remap and the unmap. An upcoming change needs to do
the unmap in a second place, so refactor the unmap logic into a
separate function. And although it is only called from one place,
refactor the remap logic as well to have functional symmetry.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430-ce-unmap-v1-1-e468328f95d9@quicinc.com
ath.git patches for v6.10
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_device from struct ath11k_ext_irq_grp by converting it
into a pointer. Then use the leverage alloc_netdev() to allocate the
net_device object at ath11k_ahb_config_ext_irq() for ahb, and
ath11k_pcic_ext_irq_config() for pcic.
The free of the device occurs at ath11k_ahb_free_ext_irq() for the ahb
case, and ath11k_pcic_free_ext_irq() for the pcic case.
[1] https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c3718936ec ("ipv6: anycast: complete RCU handling of struct
ifacaddr6") converted struct inet6_dev::ac_list to use RCU but missed that
ath11k also accesses this list. Now sparse warns:
drivers/net/wireless/ath/ath11k/mac.c:9145:21: warning: incorrect type in assignment (different address spaces)
drivers/net/wireless/ath/ath11k/mac.c:9145:21: expected struct ifacaddr6 *ifaca6
drivers/net/wireless/ath/ath11k/mac.c:9145:21: got struct ifacaddr6 [noderef] __rcu *ac_list
drivers/net/wireless/ath/ath11k/mac.c:9145:53: warning: incorrect type in assignment (different address spaces)
drivers/net/wireless/ath/ath11k/mac.c:9145:53: expected struct ifacaddr6 *ifaca6
drivers/net/wireless/ath/ath11k/mac.c:9145:53: got struct ifacaddr6 [noderef] __rcu *aca_next
Fix it by using rtnl_dereference(). Also add a note that read_lock_bh() calls
rcu_read_lock() which I was not aware of.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Fixes: c3718936ec ("ipv6: anycast: complete RCU handling of struct ifacaddr6")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240411165516.4070649-2-kvalo@kernel.org
Now that all infrastructure is in place and ath11k is fixed to handle all the
corner cases, power down the ath11k firmware during suspend and power it back
up during resume. This fixes the problem when using hibernation with ath11k PCI
devices.
For suspend, two conditions needs to be satisfied:
1. since MHI channel unprepare would be done in late suspend stage,
ath11k needs to get all QMI-dependent things done before that stage.
2. and because unprepare MHI channels requires a working MHI stack,
ath11k is not allowed to call mhi_power_down() until that finishes.
So the original suspend callback is separated into two parts: the first part
handles all QMI-dependent things in suspend callback; while the second part
powers down MHI in suspend_late callback. This is valid because kernel calls
ath11k's suspend callback before all suspend_late callbacks, making the first
condition happy. And because MHI devices are children of ath11k device
(ab->dev), kernel guarantees that ath11k's suspend_late callback is called
after QRTR's suspend_late callback, this satisfies the second condition.
Above analysis also applies to resume process. so the original resume
callback is separated into two parts: the first part powers up MHI stack
in resume_early callback, this guarantees MHI stack is working when
QRTR tries to prepare MHI channels (kernel calls QRTR's resume_early callback
after ath11k's resume_early callback, due to the child-father relationship);
the second part waits for the completion of restart, which won't fail now
since MHI channels are ready for use by QMI.
Another notable change is in power down path, we tell mhi_power_down() to not
to destroy MHI devices, making it possible for QRTR to help unprepare/prepare
MHI channels, and finally get us rid of the probe-defer issue when resume.
Also change related code due to interface changes.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240305021320.3367-4-quic_bqiang@quicinc.com
Currently we do reset for each RDDM event from MHI, however there are
cases, see below log, that we get two or more consecutive events, and
it is pointless to do reset for the subsequent ones. What's more, it
makes reset process more likely to fail.
[ 1502.115876] ath11k_pci 0000:04:00.0: boot notify status reason MHI_CB_EE_RDDM
[ 1502.115884] ath11k_pci 0000:04:00.0: firmware crashed: MHI_CB_EE_RDDM
[ 1502.224041] ath11k_pci 0000:04:00.0: boot notify status reason MHI_CB_EE_RDDM
[ 1502.224050] ath11k_pci 0000:04:00.0: firmware crashed: MHI_CB_EE_RDDM
Add a check to avoid reset again and again. This is done by tracking previous
MHI status: if we receive a new RDDM event while the previous one is
also the same, we treat it as duplicate and ignore it, because normally
we should receive a MHI_CB_EE_MISSION_MODE event between them.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240111071406.14053-1-quic_bqiang@quicinc.com
Current ROC scan will filter probe request. So P2P device cannot receive
probe request. But it is necessary for P2P mode. A P2P device cannot be
discovered if it doesn't respond to others' probe request.
In addition, station won't filter probe request with common scan. But
for station, there is no needed to receive probe request.
Based on the above two points, change scan flag scan_f_filter_prb_req
for QCA6390/WCN6855/QCA2066.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240228093537.25052-6-quic_kangyang@quicinc.com
The NoA(Notice of Absence) attribute is used by the P2P Group Owner to
signal its absence due to power save timing, concurrent operation, or
off-channel scanning. It is also used in the P2P Presence Request-Response
mechanism.
The NoA attribute shall be present in the P2P IE in the beacon frames
transmitted by a P2P Group Owner when a NoA schedule is being advertised,
or when the CTWindow is non-zero.
So add support to update P2P information after P2P GO is up through
event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
Create p2p.c and p2p.h for P2P related functions and definitions.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240228093537.25052-4-quic_kangyang@quicinc.com
P2P Element is a necessary component of P2P protocol communication.
It contains the Vendor Specific Information Element which includes
the WFA OUI and an OUI Type indicating P2P.
Add P2P IE in beacon template, and implement WMI interface for it.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240228093537.25052-3-quic_kangyang@quicinc.com
Currently we force enable power save on non-running vdevs, this results
in unexpected ping latency in below scenarios:
1. disable power save from userspace.
2. trigger suspend/resume.
With step 1 power save is disabled successfully and we get a good latency:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms
While after step 2, the latency becomes much larger:
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms
The reason is, with step 2, power save is force enabled due to vdev not
running, although mac80211 was trying to disable it to honor userspace
configuration:
ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0
Call Trace:
ath11k_wmi_pdev_set_ps_mode
ath11k_mac_op_bss_info_changed
ieee80211_bss_info_change_notify
ieee80211_reconfig
ieee80211_resume
wiphy_resume
This logic is taken from ath10k where it was added due to below comment:
Firmware doesn't behave nicely and consumes more power than
necessary if PS is disabled on a non-started vdev.
However we don't know whether such an issue also occurs to ath11k firmware
or not. But even if it does, it's not appropriate because it goes against
userspace, even cfg/mac80211 don't know we have enabled it in fact.
Remove it to fix this issue. In this way we not only get a better latency,
but also, and the most important, keeps the consistency between userspace
and kernel/driver. The biggest price for that would be the power consumption,
which is not that important, compared with the consistency.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: b2beffa7d9 ("ath11k: enable 802.11 power save mode in station mode")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
