Add two functions that can be used to stop new jobs from being queued /
continue running queued job. This can be used while a driver using m2m
helper is going to suspend / wake up from resume, and can ensure that
there's no job running in suspend process.
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Jerry-ch Chen <jerry-ch.chen@mediatek.corp-partner.google.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the split of MIPI calibration into tegra_mipi_calibrate() and
tegra_mipi_wait(), MIPI clock is not kept enabled and mutex is not locked
till the calibration is done.
So, this patch keeps MIPI clock enabled and mutex locked after triggering
start of calibration till its done.
To let calibration process go through its finite sequence codes before
calibration logic waiting for pads idle state added wait time of 75usec
to make sure it sees idle state to apply the results.
This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration()
and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline
with their usage.
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a driver calls (_)vb2_fop_release(), then such a driver should also
call vb2_video_unregister_device() instead of video_unregister_device().
This helper will call vb2_queue_release() if a filehandle is marked as
owner of the queue. This ensures that at unregister time any streaming
is cancelled and all buffers are returned to userspace.
This is very useful for complex drivers since this stops all streaming
in all subdevs in the pipeline controlled by this video device. Otherwise
this would be delayed until the owner filehandle is closed, which can be
quite some time later.
Bonus points for ordering the includes :-)
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The default RGB quantization range for BT.2020 is full range (just as for
all the other RGB pixel encodings), not limited range.
Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation
accordingly.
Also mention that HSV is always full range and cannot be limited range.
When RGB BT2020 was introduced in V4L2 it was not clear whether it should
be limited or full range, but full range is the right (and consistent)
choice.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With the removal of the legacy g_mbus_config and s_mbus_config video
operations, the sole users of V4L2_MBUS_* flags are now the newly
introduced get_mbus_config and set_mbus_config pad operations.
As the semantic of the new operations differs from the semantic of
the legacy ones, add a usage note in the v4l2-mediabus.h header to
specify how to use the flags.
Also add a TODO note to record that we intend to replace the existing
flags with fields, to prevent users from mixing conflicting values
in a single operation call.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
With all sensor and platform drivers now converted to use the new
get_mbus_config and set_mbus_config pad operations, remove the
deprecated video operations g_mbus_config and s_mbus_config.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Introduce two new pad operations to allow retrieving and configuring the
media bus parameters on a subdevice pad.
The newly introduced operations aims to replace the s/g_mbus_config video
operations, which have been on their way for deprecation since a long
time.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
Pull perf fixes from Ingo Molnar:
"Misc fixes, an expansion of perf syscall access to CAP_PERFMON
privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"
* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Add support for Intel SPR platform
perf/x86/rapl: Support multiple RAPL unit quirks
perf/x86/rapl: Fix missing psys sysfs attributes
hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
kprobes: Remove show_registers() function prototype
perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
Pull NFS client updates from Trond Myklebust:
"Stable fixes:
- pNFS: Don't return layout segments that are being used for I/O
- pNFS: Don't move layout segments off the active list when being used for I/O
Features:
- NFS: Add support for user xattrs through the NFSv4.2 protocol
- NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
- NFSv4.0 allow nconnect for v4.0
Bugfixes and cleanups:
- nfs: ensure correct writeback errors are returned on close()
- nfs: nfs_file_write() should check for writeback errors
- nfs: Fix getxattr kernel panic and memory overflow
- NFS: Fix the pNFS/flexfiles mirrored read failover code
- SUNRPC: dont update timeout value on connection reset
- freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
- sunrpc: destroy rpc_inode_cachep after unregister_filesystem"
* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
NFS: Fix flexfiles read failover
fs: nfs: delete repeated words in comments
rpc_pipefs: convert comma to semicolon
nfs: Fix getxattr kernel panic and memory overflow
NFS: Don't return layout segments that are in use
NFS: Don't move layouts to plh_return_segs list while in use
NFS: Add layout segment info to pnfs read/write/commit tracepoints
NFS: Add tracepoints for layouterror and layoutstats.
NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
SUNRPC dont update timeout value on connection reset
nfs: nfs_file_write() should check for writeback errors
nfs: ensure correct writeback errors are returned on close()
NFSv4.2: xattr cache: get rid of cache discard work queue
NFS: remove redundant initialization of variable result
NFSv4.0 allow nconnect for v4.0
freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
sunrpc: destroy rpc_inode_cachep after unregister_filesystem
NFSv4.2: add client side xattr caching.
NFSv4.2: hook in the user extended attribute handlers
NFSv4.2: add the extended attribute proc functions.
...
Pull more ACPI updates from Rafael Wysocki:
"Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
driver and the Designware i2c driver (changes from Akshu Agrawal and
Pu Wen)"
* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
clk: x86: Support RV architecture
ACPI: APD: Add a fmw property is_raven
clk: x86: Change name from ST to FCH
ACPI: APD: Change name from ST to FCH
i2c: designware: Add device HID for Hygon I2C controller
Pull one more power management update from Rafael Wysocki:
"Modify the intel_pstate driver to allow it to work in the passive mode
with hardware-managed P-states (HWP) enabled"
* tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Implement passive mode with HWP enabled
Pull MFD updates from Lee Jones:
"Core Frameworks
- Make better attempt at matching device with the correct OF node
- Allow batch removal of hierarchical sub-devices
New Drivers
- Add STM32 Clocksource driver
- Add support for Khadas System Control Microcontroller
Driver Removal
- Remove unused driver for TI's SMSC ECE1099
New Device Support
- Add support for Intel Emmitsburg PCH to Intel LPSS PCI
- Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
- Add support for Dialog DA revision to Dialog DA9063
New Functionality
- Add support for AXP803 to be probed by I2C
Fix-ups
- Numerous W=1 warning fixes
- Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
- Enabled Regmap 'fast I/O' in stm32-lptimer
- Change BUG_ON to WARN_ON in arizona-core
- Remove superfluous code/initialisation (madera, max14577)
- Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
- Switch to of_platform_populate() in sprd-sc27xx-spi
- Expand out set/get brightness/pwm macros in lm3533-ctrlbank
- Disable IRQs on suspend in motorola-cpcap
- Clean-up error handling in intel_soc_pmic_mrfld
- Ensure correct removal order of sub-devices in madera
- Many s/HTTP/HTTPS/ link changes
- Ensure name used with Regmap is unique in syscon
Bug Fixes
- Properly 'put' clock on unbind and error in arizona-core
- Fix revision handling in da9063
- Fix 'assignment of read-only location' error in kempld-core
- Avoid using the Regmap API when atomic in rn5t618
- Redefine volatile register description in rn5t618
- Use locking to protect event handler in dln2"
* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: syscon: Use a unique name with regmap_config
mfd: Replace HTTP links with HTTPS ones
mfd: dln2: Run event handler loop under spinlock
mfd: madera: Improve handling of regulator unbinding
mfd: mfd-core: Add mechanism for removal of a subset of children
mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
mfd: max14577: Remove redundant initialization of variable current_bits
mfd: rn5t618: Fix caching of battery related registers
mfd: max77693-private: Drop a duplicated word
mfd: da9055: pdata.h: Drop a duplicated word
mfd: rn5t618: Make restart handler atomic safe
mfd: kempld-core: Fix 'assignment of read-only location' error
mfd: axp20x: Allow the AXP803 to be probed by I2C
mfd: da9063: Add support for latest DA silicon revision
mfd: da9063: Fix revision handling to correctly select reg tables
dt-bindings: mfd: st,stmfx: Remove I2C unit name
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
mfd: motorola-cpcap: Disable interrupt for suspend
mfd: smsc-ece1099: Remove driver
mfd: core: Add OF_MFD_CELL_REG() helper
...
Merge more updates from Andrew Morton:
"Subsystems affected by this patch series: mm/hotfixes, lz4, exec,
mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
virtio: pci: constify ioreadX() iomem argument (as in generic implementation)
ntb: intel: constify ioreadX() iomem argument (as in generic implementation)
rtl818x: constify ioreadX() iomem argument (as in generic implementation)
iomap: constify ioreadX() iomem argument (as in generic implementation)
sh: use generic strncpy()
sh: clkfwk: remove r8/r16/r32
include/asm-generic/vmlinux.lds.h: align ro_after_init
mm: annotate a data race in page_zonenum()
mm/swap.c: annotate data races for lru_rotate_pvecs
mm/rmap: annotate a data race at tlb_flush_batched
mm/mempool: fix a data race in mempool_free()
mm/list_lru: fix a data race in list_lru_count_one
mm/memcontrol: fix a data race in scan count
mm/page_counter: fix various data races at memsw
mm/swapfile: fix and annotate various data races
mm/filemap.c: fix a data race in filemap_fault()
mm/swap_state: mark various intentional data races
mm/page_io: mark various intentional data races
mm/frontswap: mark various intentional data races
mm/kmemleak: silence KCSAN splats in checksum
...
BUG: KCSAN: data-race in page_cpupid_xchg_last / put_page
write (marked) to 0xfffffc0d48ec1a00 of 8 bytes by task 91442 on cpu 3:
page_cpupid_xchg_last+0x51/0x80
page_cpupid_xchg_last at mm/mmzone.c:109 (discriminator 11)
wp_page_reuse+0x3e/0xc0
wp_page_reuse at mm/memory.c:2453
do_wp_page+0x472/0x7b0
do_wp_page at mm/memory.c:2798
__handle_mm_fault+0xcb0/0xd00
handle_pte_fault at mm/memory.c:4049
(inlined by) __handle_mm_fault at mm/memory.c:4163
handle_mm_fault+0xfc/0x2f0
handle_mm_fault at mm/memory.c:4200
do_page_fault+0x263/0x6f9
do_user_addr_fault at arch/x86/mm/fault.c:1465
(inlined by) do_page_fault at arch/x86/mm/fault.c:1539
page_fault+0x34/0x40
read to 0xfffffc0d48ec1a00 of 8 bytes by task 94817 on cpu 69:
put_page+0x15a/0x1f0
page_zonenum at include/linux/mm.h:923
(inlined by) is_zone_device_page at include/linux/mm.h:929
(inlined by) page_is_devmap_managed at include/linux/mm.h:948
(inlined by) put_page at include/linux/mm.h:1023
wp_page_copy+0x571/0x930
wp_page_copy at mm/memory.c:2615
do_wp_page+0x107/0x7b0
__handle_mm_fault+0xcb0/0xd00
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
Reported by Kernel Concurrency Sanitizer on:
CPU: 69 PID: 94817 Comm: systemd-udevd Tainted: G W O L 5.5.0-next-20200204+ #6
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
A page never changes its zone number. The zone number happens to be
stored in the same word as other bits which are modified, but the zone
number bits will never be modified by any other write, so it can accept
a reload of the zone bits after an intervening write and it don't need
to use READ_ONCE(). Thus, annotate this data race using
ASSERT_EXCLUSIVE_BITS() to also assert that there are no concurrent
writes to it.
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/1581619089-14472-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct mem_cgroup_per_node mz.lru_zone_size[zone_idx][lru] could be
accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in lruvec_lru_size / mem_cgroup_update_lru_size
write to 0xffff9c804ca285f8 of 8 bytes by task 50951 on cpu 12:
mem_cgroup_update_lru_size+0x11c/0x1d0
mem_cgroup_update_lru_size at mm/memcontrol.c:1266
isolate_lru_pages+0x6a9/0xf30
shrink_active_list+0x123/0xcc0
shrink_lruvec+0x8fd/0x1380
shrink_node+0x317/0xd80
do_try_to_free_pages+0x1f7/0xa10
try_to_free_pages+0x26c/0x5e0
__alloc_pages_slowpath+0x458/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_vma+0x8a/0x2c0
do_anonymous_page+0x170/0x700
__handle_mm_fault+0xc9f/0xd00
handle_mm_fault+0xfc/0x2f0
do_page_fault+0x263/0x6f9
page_fault+0x34/0x40
read to 0xffff9c804ca285f8 of 8 bytes by task 50964 on cpu 95:
lruvec_lru_size+0xbb/0x270
mem_cgroup_get_zone_lru_size at include/linux/memcontrol.h:536
(inlined by) lruvec_lru_size at mm/vmscan.c:326
shrink_lruvec+0x1d0/0x1380
shrink_node+0x317/0xd80
do_try_to_free_pages+0x1f7/0xa10
try_to_free_pages+0x26c/0x5e0
__alloc_pages_slowpath+0x458/0x1290
__alloc_pages_nodemask+0x3bb/0x450
alloc_pages_current+0xa6/0x120
alloc_slab_page+0x3b1/0x540
allocate_slab+0x70/0x660
new_slab+0x46/0x70
___slab_alloc+0x4ad/0x7d0
__slab_alloc+0x43/0x70
kmem_cache_alloc+0x2c3/0x420
getname_flags+0x4c/0x230
getname+0x22/0x30
do_sys_openat2+0x205/0x3b0
do_sys_open+0x9a/0xf0
__x64_sys_openat+0x62/0x80
do_syscall_64+0x91/0xb47
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported by Kernel Concurrency Sanitizer on:
CPU: 95 PID: 50964 Comm: cc1 Tainted: G W O L 5.5.0-next-20200204+ #6
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
The write is under lru_lock, but the read is done as lockless. The scan
count is used to determine how aggressively the anon and file LRU lists
should be scanned. Load tearing could generate an inefficient heuristic,
so fix it by adding READ_ONCE() for the read.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200206034945.2481-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The thp prefix is more frequently used than hpage and we should be
consistent between the various functions.
[akpm@linux-foundation.org: fix mm/migrate.c]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: http://lkml.kernel.org/r/20200629151959.15779-6-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more SCSI updates from James Bottomley:
"This is the set of patches which arrived too late to stabilise in
-next for the first pull.
It's really just an lpfc driver update and an assortment of minor
fixes, all in drivers. The only core update is to the zone block
device driver, which isn't the one most people use"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Update lpfc version to 12.8.0.3
scsi: lpfc: Fix LUN loss after cable pull
scsi: lpfc: Fix validation of bsg reply lengths
scsi: lpfc: Fix retry of PRLI when status indicates its unsupported
scsi: lpfc: Fix oops when unloading driver while running mds diags
scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter
scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value
scsi: lpfc: Fix FCoE speed reporting
scsi: lpfc: Add missing misc_deregister() for lpfc_init()
scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport
scsi: scsi_transport_sas: Add spaces around binary operator "|"
scsi: sd_zbc: Improve zone revalidation
scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases
scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()
scsi: target: Make iscsit_register_transport() return void
Pull pwm updates from Thierry Reding:
"The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some
types of hardware can generate the full range of signals that they're
capable of.
The remainder is mostly minor fixes and cleanups"
* tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: handle clk_get_rate() return
pwm: Replace HTTP links with HTTPS ones
pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header
pwm: mediatek: Provide missing kerneldoc description for 'soc' arg
pwm: bcm-kona: Remove impossible comparison when validating duty cycle
pwm: bcm-iproc: Remove impossible comparison when validating duty cycle
pwm: iqs620a: Use lowercase hexadecimal literals for consistency
pwm: Convert period and duty cycle to u64
clk: pwm: Use 64-bit division function
backlight: pwm_bl: Use 64-bit division function
pwm: sun4i: Use nsecs_to_jiffies to avoid a division
pwm: sifive: Use 64-bit division macro
pwm: iqs620a: Use 64-bit division
pwm: imx27: Use 64-bit division macro
pwm: imx-tpm: Use 64-bit division macro
pwm: clps711x: Use 64-bit division macro
hwmon: pwm-fan: Use 64-bit division macro
drm/i915: Use 64-bit division macro
This remoes the code from the COW path to call debug_dma_assert_idle(),
which was added many years ago.
Google shows that it hasn't caught anything in the 6+ years we've had it
apart from a false positive, and Hugh just noticed how it had a very
unfortunate spinlock serialization in the COW path.
He fixed that issue the previous commit (a85ffd59bd: "dma-debug: fix
debug_dma_assert_idle(), use rcu_read_lock()"), but let's see if anybody
even notices when we remove this function entirely.
NOTE! We keep the dma tracking infrastructure that was added by the
commit that introduced it. Partly to make it easier to resurrect this
debug code if we ever deside to, and partly because that tracking by pfn
and offset looks quite reasonable.
The problem with this debug code was simply that it was expensive and
didn't seem worth it, not that it was wrong per se.
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
Pull more timer updates from Thomas Gleixner:
"A set of posix CPU timer changes which allows to defer the heavy work
of posix CPU timers into task work context. The tick interrupt is
reduced to a quick check which queues the work which is doing the
heavy lifting before returning to user space or going back to guest
mode. Moving this out is deferring the signal delivery slightly but
posix CPU timers are inaccurate by nature as they depend on the tick
so there is no real damage. The relevant test cases all passed.
This lifts the last offender for RT out of the hard interrupt context
tick handler, but it also has the general benefit that the actual
heavy work is accounted to the task/process and not to the tick
interrupt itself.
Further optimizations are possible to break long sighand lock hold and
interrupt disabled (on !RT kernels) times when a massive amount of
posix CPU timers (which are unpriviledged) is armed for a
task/process.
This is currently only enabled for x86 because the architecture has to
ensure that task work is handled in KVM before entering a guest, which
was just established for x86 with the new common entry/exit code which
got merged post 5.8 and is not the case for other KVM architectures"
* tag 'timers-core-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Select POSIX_CPU_TIMERS_TASK_WORK
posix-cpu-timers: Provide mechanisms to defer timer handling to task_work
posix-cpu-timers: Split run_posix_cpu_timers()
Pull OpenRISC updates from Stafford Horne:
"A few patches all over the place during this cycle, mostly bug and
sparse warning fixes for OpenRISC, but a few enhancements too. Note,
there are 2 non OpenRISC specific fixups.
Non OpenRISC fixes:
- In init we need to align the init_task correctly to fix an issue
with MUTEX_FLAGS, reviewed by Peter Z. No one picked this up so I
kept it on my tree.
- In asm-generic/io.h I fixed up some sparse warnings, OK'd by Arnd.
Arnd asked to merge it via my tree.
OpenRISC fixes:
- Many fixes for OpenRISC sprase warnings.
- Add support OpenRISC SMP tlb flushing rather than always flushing
the entire TLB on every CPU.
- Fix bug when dumping stack via /proc/xxx/stack of user threads"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: uaccess: Add user address space check to access_ok
openrisc: signal: Fix sparse address space warnings
openrisc: uaccess: Remove unused macro __addr_ok
openrisc: uaccess: Use static inline function in access_ok
openrisc: uaccess: Fix sparse address space warnings
openrisc: io: Fixup defines and move include to the end
asm-generic/io.h: Fix sparse warnings on big-endian architectures
openrisc: Implement proper SMP tlb flushing
openrisc: Fix oops caused when dumping stack
openrisc: Add support for external initrd images
init: Align init_task to avoid conflict with MUTEX_FLAGS
openrisc: fix __user in raw_copy_to_user()'s prototype
Pull more xen updates from Juergen Gross:
- Remove support for running as 32-bit Xen PV-guest.
32-bit PV guests are rarely used, are lacking security fixes for
Meltdown, and can be easily replaced by PVH mode. Another series for
doing more cleanup will follow soon (removal of 32-bit-only pvops
functionality).
- Fixes and additional features for the Xen display frontend driver.
* tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drm/xen-front: Pass dumb buffer data offset to the backend
xen: Sync up with the canonical protocol definition in Xen
drm/xen-front: Add YUYV to supported formats
drm/xen-front: Fix misused IS_ERR_OR_NULL checks
xen/gntdev: Fix dmabuf import with non-zero sgt offset
x86/xen: drop tests for highmem in pv code
x86/xen: eliminate xen-asm_64.S
x86/xen: remove 32-bit Xen PV guest support
Pull hyper-v fixes from Wei Liu:
- fix oops reporting on Hyper-V
- make objtool happy
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Make hv_setup_sched_clock inline
Drivers: hv: vmbus: Only notify Hyper-V for die events that are oops
Pull module updates from Jessica Yu:
"The most important change would be Christoph Hellwig's patch
implementing proprietary taint inheritance, in an effort to discourage
the creation of GPL "shim" modules that interface between GPL symbols
and proprietary symbols.
Summary:
- Have modules that use symbols from proprietary modules inherit the
TAINT_PROPRIETARY_MODULE taint, in an effort to prevent GPL shim
modules that are used to circumvent _GPL exports. These are modules
that claim to be GPL licensed while also using symbols from
proprietary modules. Such modules will be rejected while non-GPL
modules will inherit the proprietary taint.
- Module export space cleanup. Unexport symbols that are unused
outside of module.c or otherwise used in only built-in code"
* tag 'modules-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
modules: inherit TAINT_PROPRIETARY_MODULE
modules: return licensing information from find_symbol
modules: rename the licence field in struct symsearch to license
modules: unexport __module_address
modules: unexport __module_text_address
modules: mark each_symbol_section static
modules: mark find_symbol static
modules: mark ref_module static
modules: linux/moduleparam.h: drop duplicated word in a comment
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
Pull i2c updates from Wolfram Sang:
- bus recovery can now be given a pinctrl handle and the I2C core will
do all the steps to switch to/from GPIO which can save quite some
boilerplate code from drivers
- "fallthrough" conversion
- driver updates, mostly ID additions
* 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (32 commits)
i2c: iproc: fix race between client unreg and isr
i2c: eg20t: use generic power management
i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume
i2c: mediatek: Fix i2c_spec_values description
i2c: mediatek: Add i2c compatible for MediaTek MT8192
dt-bindings: i2c: update bindings for MT8192 SoC
i2c: mediatek: Add access to more than 8GB dram in i2c driver
i2c: mediatek: Add apdma sync in i2c driver
i2c: i801: Add support for Intel Tiger Lake PCH-H
i2c: i801: Add support for Intel Emmitsburg PCH
i2c: bcm2835: Replace HTTP links with HTTPS ones
Documentation: i2c: dev: 'block process call' is supported
i2c: at91: Move to generic GPIO bus recovery
i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs
i2c: core: add generic I2C GPIO recovery
dt-bindings: i2c: add generic properties for GPIO bus recovery
i2c: rcar: avoid race when unregistering slave
i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c
i2c: tegra: Fix runtime resume to re-init VI I2C
i2c: tegra: Fix the error path in tegra_i2c_runtime_resume
...
There has been some heat around prandom_u32() lately, and some people
were wondering if there was a simple way to determine how often
it was used, before considering making it maybe 10 times more expensive.
This tracepoint exports the generated pseudo random value.
Tested:
perf list | grep prandom_u32
random:prandom_u32 [Tracepoint event]
perf record -a [-g] [-C1] -e random:prandom_u32 sleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 259.748 MB perf.data (924087 samples) ]
perf report --nochildren
...
97.67% ksoftirqd/1 [kernel.vmlinux] [k] prandom_u32
|
---prandom_u32
prandom_u32
|
|--48.86%--tcp_v4_syn_recv_sock
| tcp_check_req
| tcp_v4_rcv
| ...
--48.81%--tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
...
perf script
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the sync up with the canonical definition of the
display protocol in Xen.
1. Add protocol version as an integer
Version string, which is in fact an integer, is hard to handle in the
code that supports different protocol versions. To simplify that
also add the version as an integer.
2. Pass buffer offset with XENDISPL_OP_DBUF_CREATE
There are cases when display data buffer is created with non-zero
offset to the data start. Handle such cases and provide that offset
while creating a display buffer.
3. Add XENDISPL_OP_GET_EDID command
Add an optional request for reading Extended Display Identification
Data (EDID) structure which allows better configuration of the
display connectors over the configuration set in XenStore.
With this change connectors may have multiple resolutions defined
with respect to detailed timing definitions and additional properties
normally provided by displays.
If this request is not supported by the backend then visible area
is defined by the relevant XenStore's "resolution" property.
If backend provides extended display identification data (EDID) with
XENDISPL_OP_GET_EDID request then EDID values must take precedence
over the resolutions defined in XenStore.
4. Bump protocol version to 2.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200813062113.11030-5-andr2000@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Currently, the only way to remove MFD children is with a call to
mfd_remove_devices, which will remove all the children. Under
some circumstances it is useful to remove only a subset of the
child devices. For example if some additional clean up is required
between removal of certain child devices.
To accomplish this a level field is added to mfd_cell, the normal
mfd_remove_devices is modified to not remove devices that are set
to a higher level and a corresponding mfd_remove_devices_late
function is added to remove those children.
See further discussion at:
https://lore.kernel.org/lkml/20200616075834.GF2608702@dell/
Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This update adds new regmap tables to support the latest DA silicon
which will automatically be selected based on the chip and variant
information read from the device.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The current implementation performs checking in the i2c_probe()
function of the variant_code but does this immediately after the
containing struct has been initialised as all zero. This means the
check for variant code will always default to using the BB tables
and will never select AD. The variant code is subsequently set
by device_init() and later used by the RTC so really it's a little
fortunate this mismatch works.
This update adds raw I2C read access functionality to read the chip
and variant/revision information (common to all revisions) so that
it can subsequently correctly choose the proper regmap tables for
real initialisation.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This MFD driver has no user. The keypad driver of this device never made
it into the kernel. Therefore, this driver is useless. Remove it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Extend current list of helpers to provide support for parent drivers
wishing to match specific child devices to particular OF nodes.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
