gcc -Wextra warns about mixing drbd_state_rv with drbd_ret_code
in a couple of places:
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_set_role':
drivers/block/drbd/drbd_nl.c:777:14: warning: comparison between 'enum drbd_state_rv' and 'enum drbd_ret_code' [-Wenum-compare]
777 | if (retcode != NO_ERROR)
| ^~
drivers/block/drbd/drbd_nl.c:784:12: warning: implicit conversion from 'enum drbd_ret_code' to 'enum drbd_state_rv' [-Wenum-conversion]
784 | retcode = ERR_MANDATORY_TAG;
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_attach':
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
1965 | retcode = rv; /* FIXME: Type mismatch. */
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_connect':
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2690 | retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE);
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_disconnect':
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2803 | retcode = rv; /* FIXME: Type mismatch. */
| ^
In each case, both are passed into drbd_adm_finish(), which just takes
a 32-bit integer and is happy with either, presumably intentionally.
Restructure the code to pass either type directly in there in most
cases, avoiding the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two initializers for P_RETRY_WRITE:
drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]
Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.
Fixes: 036b17eaab ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bug is here:
idr_remove(&connection->peer_devices, vnr);
If the previous for_each_connection() don't exit early (no goto hit
inside the loop), the iterator 'connection' after the loop will be a
bogus pointer to an invalid structure object containing the HEAD
(&resource->connections). As a result, the use of 'connection' above
will lead to a invalid memory access (including a possible invalid free
as idr_remove could call free_layer).
The original intention should have been to remove all peer_devices,
but the following lines have already done the work. So just remove
this line and the unneeded label, to fix this bug.
Cc: stable@vger.kernel.org
Fixes: c06ece6ba6 ("drbd: Turn connection->volumes into connection->peer_devices")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Reviewed-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In get_initial_state, it calls notify_initial_state_done(skb,..) if
cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(),
the skb will be freed by nlmsg_free(skb).
Then get_initial_state will goto out and the freed skb will be used by
return value skb->len, which is a uaf bug.
What's worse, the same problem goes even further: skb can also be
freed in the notify_*_state_change -> notify_*_state calls below.
Thus 4 additional uaf bugs happened.
My patch lets the problem callee functions: notify_initial_state_done
and notify_*_state_change return an error code if errors happen.
So that the error codes could be propagated and the uaf bugs can be avoid.
v2 reports a compilation warning. This v3 fixed this warning and built
successfully in my local environment with no additional warnings.
v2: https://lore.kernel.org/patchwork/patch/1435218/
Fixes: a29728463b ("drbd: Backport the "events2" command")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
Scenario:
---------
bio chain generated by blk_queue_split().
Some split bio fails and propagates its error status to the "parent" bio.
But then the (last part of the) parent bio itself completes without error.
We would clobber the already recorded error status with BLK_STS_OK,
causing silent data corruption.
Reproducer:
-----------
How to trigger this in the real world within seconds:
DRBD on top of degraded parity raid,
small stripe_cache_size, large read_ahead setting.
Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED",
umount and mount again, "reboot").
Cause significant read ahead.
Large read ahead request is split by blk_queue_split().
Parts of the read ahead that are already in the stripe cache,
or find an available stripe cache to use, can be serviced.
Parts of the read ahead that would need "too much work",
would need to wait for a "stripe_head" to become available,
are rejected immediately.
For larger read ahead requests that are split in many pieces, it is very
likely that some "splits" will be serviced, but then the stripe cache is
exhausted/busy, and the remaining ones will be rejected.
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Cc: <stable@vger.kernel.org> # 4.13.x
Link: https://lore.kernel.org/r/20220330185551.3553196-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both
for the passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All modern drivers can support extra partitions using the extended
dev_t. In fact except for the ioctl method drivers never even see
partitions in normal operation.
So remove the GENHD_FL_EXT_DEVT and allow extra partitions for all
block devices that do support partitions, and require those that
do not support partitions to explicit disallow them using
GENHD_FL_NO_PART.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211122130625.1136848-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull more block driver updates from Jens Axboe:
- Last series adding error handling support for add_disk() in drivers.
After this one, and once the SCSI side has been merged, we can
finally annotate add_disk() as must_check. (Luis)
- bcache fixes (Coly)
- zram fixes (Ming)
- ataflop locking fix (Tetsuo)
- nbd fixes (Ye, Yu)
- MD merge via Song
- Cleanup (Yang)
- sysfs fix (Guoqing)
- Misc fixes (Geert, Wu, luo)
* tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits)
bcache: Revert "bcache: use bvec_virt"
ataflop: Add missing semicolon to return statement
floppy: address add_disk() error handling on probe
ataflop: address add_disk() error handling on probe
block: update __register_blkdev() probe documentation
ataflop: remove ataflop_probe_lock mutex
mtd/ubi/block: add error handling support for add_disk()
block/sunvdc: add error handling support for add_disk()
z2ram: add error handling support for add_disk()
nvdimm/pmem: use add_disk() error handling
nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned
nvdimm/blk: add error handling support for add_disk()
nvdimm/blk: avoid calling del_gendisk() on early failures
nvdimm/btt: add error handling support for add_disk()
nvdimm/btt: use goto error labels on btt_blk_init()
loop: Remove duplicate assignments
drbd: Fix double free problem in drbd_create_device
nvdimm/btt: do not call del_gendisk() if not needed
bcache: fix use-after-free problem in bcache_device_free()
zram: replace fsync_bdev with sync_blockdev
...
Pull bdev size cleanups from Jens Axboe:
"Clean up the bdev size handling with new bdev_nr_bytes() helper"
* tag 'for-5.16/bdev-size-2021-10-29' of git://git.kernel.dk/linux-block: (34 commits)
partitions/ibm: use bdev_nr_sectors instead of open coding it
partitions/efi: use bdev_nr_bytes instead of open coding it
block/ioctl: use bdev_nr_sectors and bdev_nr_bytes
block: cache inode size in bdev
udf: use sb_bdev_nr_blocks
reiserfs: use sb_bdev_nr_blocks
ntfs: use sb_bdev_nr_blocks
jfs: use sb_bdev_nr_blocks
ext4: use sb_bdev_nr_blocks
block: add a sb_bdev_nr_blocks helper
block: use bdev_nr_bytes instead of open coding it in blkdev_fallocate
squashfs: use bdev_nr_bytes instead of open coding it
reiserfs: use bdev_nr_bytes instead of open coding it
pstore/blk: use bdev_nr_bytes instead of open coding it
ntfs3: use bdev_nr_bytes instead of open coding it
nilfs2: use bdev_nr_bytes instead of open coding it
nfs/blocklayout: use bdev_nr_bytes instead of open coding it
jfs: use bdev_nr_bytes instead of open coding it
hfsplus: use bdev_nr_sectors instead of open coding it
hfs: use bdev_nr_sectors instead of open coding it
...
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a break statement instead of just
letting the code fall through to the next, and by adding a fallthrough
pseudo-keyword in places whre the code is intended to fall through.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fixes the following W=1 kernel build warning(s):
from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1968:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'flags' not described in 'drbd_determine_dev_size'
drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'rs' not described in 'drbd_determine_dev_size'
drivers/block/drbd/drbd_nl.c:1148: warning: Function parameter or member 'dc' not described in 'drbd_check_al_size'
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210312105530.2219008-12-lee.jones@linaro.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
