Currently, if we encounter unimplemented functions, it is difficult to
tell what caused them just by looking at dmesg and that is compounded by
the fact that it is often hard to reproduce said issues, for instance we
have had reports of this condition being triggered when removing a
secondary display that is setup in mirror mode and is connected using
usb-c. So, to have access to more detailed debugging information, add an
ASSERT() to dal_irq_service_ack() and dal_irq_service_set() that only
triggers when we encounter an unimplemented function.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
CONFIG_DRM_AMD_DC_DCN is used by pass the compilation failures, but DC
code should be OS-agnostic.
This patch fixes it by removing unnecessasry CONFIG_DRM_AMD_DC_DCN
in irq directory.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans under 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enablement, causing DMUB to access an irresponsive PHY
and thus a hard hang on the system.
[How]
Disable 48mhz refclk off when there is any HPD status in
connected state.
Reviewed-by: Hersen Wu <hersenwu@amd.com>
Acked-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During GPU reset, when receiving a DMCUB OUTBUX0 interrupt,
DAL code will set it to be OUTBOX interrupt and sets hw interrupt.
However, OUTBOX interrupt is not registered yet, so a NULL pointer
access will be executed.
Call Trace:
dal_irq_service_set+0x30/0x90 [amdgpu]
dc_interrupt_set+0x24/0x30 [amdgpu]
amdgpu_dm_set_dmub_outbox_irq_state+0x22/0x30 [amdgpu]
amdgpu_irq_update+0x77/0xa0 [amdgpu]
amdgpu_irq_gpu_reset_resume_helper+0x67/0xa0 [amdgpu]
amdgpu_do_asic_reset+0x219/0x260 [amdgpu]
amdgpu_device_gpu_recover.cold+0x8c5/0xb64 [amdgpu]
amdgpu_debugfs_gpu_recover_show+0x2c/0x60 [amdgpu]
seq_read_iter+0xc2/0x450
? do_anonymous_page+0x22c/0x3b0
seq_read+0xf9/0x140
full_proxy_read+0x5c/0x90
vfs_read+0xaa/0x190
ksys_read+0x67/0xe0
__x64_sys_read+0x1a/0x20
Fixes: effbf6ca7e ("drm/amdgpu/display: remove an old DCN3 guard")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
irq service requires changes for DCE6 support
[How]
(v1) DCE6 targets are added replicating existing DCE8 implementation.
due to missing CRTC_VERTICAL_INTERRUPT0_CONTROL registers/masks,
dce/dce_8_0_{d,sh_mask}.h used instead of dce/dce_6_0_{d,sh_mask}.h
(v2) DCE6 headers used adding the necessary vblank irq registers
(INT_MASK and VBLANK_STATUS) and vblank irq masks as implemented
in amdgpu driver.
Add vblank_irq_info_funcs_dce60 with .set and .ack as per commit
b10d51f ("drm/amd/display: Add interrupt entries for VBLANK isr.")
and use it in vblank_int_entry(reg_num) macro definition
(v3) updated due to following kernel 5.3 commit:
4fc4dca ("drm/amd: drop use of drmp.h in os_types.h")
(v4) updated due to following kernel 5.6 commit:
d9e3267 ("drm/amd/display: cleanup of construct and destruct funcs")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ->info[] array has DAL_IRQ_SOURCES_NUMBER elements so this condition
should be >= instead of > or we could read one element beyond the end of
the array.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
