[Why]
Front-end would be programmed using the stream update flags set
from the previous update and the full update should be triggered
whenever commit_state_no_check gets called.
[How]
Set all stream update flags before programming the front-end
Clear all flags that got set to avoid redundant programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other means to enable DPIA trace.
[How]
Reuse existing DC debug mask to enable DPIA trace log from
kernel command line. This makes debugging DPIA issues easier
especially when system power state (suspend/reboot) is involved.
To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to
kernel command line.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other debug tools to enable DPIA trace.
[How]
Exposes interfaces to update trace mask from the DMUB GPINT commands.
Also provides DC implementations to enable DPIA trace.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be checking to see if async flips are supported in
amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also,
async flipping isn't supported if a plane's framebuffer changes memory
domains during an atomic commit. So, move the check from
dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if
the memory domain has changed in amdgpu_dm_atomic_check().
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733
Fixes: c1e18c44dc ("drm/amd/display: only accept async flips for fast updates")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't set predefined degamma curve to cursor plane if the cursor
attribute flag is not set. Applying a degamma curve to the cursor by
default breaks userspace expectation. Checking the flag before
performing any color transformation prevents too dark cursor gamma in
DCN3+ on many Linux desktop environment (KDE Plasma, GNOME,
wlroots-based, etc.) as reported at:
- https://gitlab.freedesktop.org/drm/amd/-/issues/1513
This is the same approach followed by DCN2 drivers where the issue is
not present.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add various functions for replay, such as construct, destroy, enable
get_state, and copy_setting etc. These functions communicate with the
firmware to setup and enable panel replay
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some instances, the GPU is transmitting repeated frame to the sink
without any updates or changes in the content. These repeat transmission
are wasteful, resulting in power draw in different aspects of the system
1. DCN is fetching the frame of data from DF/UMC/DRAM. This memory traffic
prevents power down of parts of this HW path.
2. GPU is transmitting pixel data to the display through the main link of
the DisplayPort interface. This prevents power down of both the Source
transmitter (TX) and the Sink receiver (RX)
The concepts of utilizing replay is similar to PSR, but there is a benefit of:
Source and Sink remaining synchronized which allows for
- lower latency when switching from replay to live frames
- enable the possibility of more use cases
- easy control of the sink's refresh rate during replay
Due to Source and Sink remaining timing synchronized, Replay can be activated
in more UI scenarios.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: 4f6d9e38c4 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expressions under 'else' branch in function 'dm_vblank_get_counter' &
'amdgpu_dm_backlight_get_level' are executed whenever the expression in
'if' is False. Otherwise, return from function occurs. Therefore, there is
no need in 'else', and it has been removed.
Fixes the following:
WARNING: else is not generally useful after a break or return
+ return 0;
+ else {
WARNING: else is not generally useful after a break or return
+ return convert_brightness_to_user(&caps, avg);
+ } else {
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock the "aconnector->handle_mst_msg_ready"
mutex before returning.
Fixes: bb4fa525f3 ("drm/amd/display: Add polling method to handle MST reply packet")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix underflow issue on 175hz timing
- Add interface to modify DMUB panel power options
- Remove check for default eDP panel_mode
- Add new sequence for 4-lane HBR3 on vendor specific retimers
- Update DPG test pattern programming
- Correct unit conversion for vstartup
- Exit idle optimizations before attempt to access PHY
- Refactor recout calculation with a more generic formula
- Read down-spread percentage from lut to adjust dprefclk.
- Don't apply FIFO resync W/A if rdivider = 0
- Prevent invalid pipe connections
- Rearrange dmub_cmd defs order
- Add VESA SCR case for default aux backlight
- Guard DCN31 PHYD32CLK logic against chip family
- Correct grammar mistakes
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This option can vary depending on the panel and may be required to be
called during sink detection phase before transmitter control.
[How]
Allow modify the bit depending on the eDP panel connected with a new
interface.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some vendor specific retimer setups for downstream 4-lane HBR3
configuration, the sink will show severe corruption (horizontal shifting)
and intermittent blanking.
[How]
Add new retimer programming sequence before clock recovery when 4 lanes
are active.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Last ODM slice could be slightly larger than other slice because it can be
including the residual.
[How]
Update DPG pattern programming sequence to use a different width for
last odm slice.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
vstartup is calculated to be a large number. It works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[How]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current recout calculation has a few assumptions and implementation
for MPO + ODM combine calculation is very specific. The equation has
too many cases without enough comments to document the detail.
[How]
The change remove the following assumptions:
1. When MPO is enabled, we only allow ODM Combine 2:1
2. ODM Combine always has even segment width.
3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from
its top pipe.
The change applies a generic formula with more details in comment to
document this solution so it is eaiser to learn and debug later.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Prevent ODM pipe connections between pipes that are not part
of the same plane when adding a plane to context
- Re-attach child pipes of ODM slice about to be disconnected
to prevent any lost pipes with invalid tops/bottoms
- We cannot split if head_pipe is not in ODM. Preventing this
avoids creating an invalid context with an invalid pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang on RISC-V appears to be unaffected by the bug causing excessive
stack usage in calculate_bandwidth(). clang 16 with -fstack-usage
reports a 304 byte stack frame size with CONFIG_ARCH_RV32I, and 512
bytes with CONFIG_ARCH_RV64I.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.
[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
