MTL's primary GT can continue to use the same engine TLB invalidation
programming as past Xe_HP-based platforms. However the media GT needs
some special handling:
* Invalidation registers on the media GT are singleton registers
(unlike the primary GT where they are still MCR).
* Since the GSC is now exposed as an engine, there's a new register to
use for TLB invalidation. The offset is identical to the compute
engine offset, but this is expected --- compute engines only exist on
the primary GT while the GSC only exists on the media GT.
* Although there's only a single GSC engine instance, it inexplicably
uses bit 1 to request invalidations rather than bit 0.
v2:
- Add a 'regs == xelpmp_regs' condition to the GSC instance handling.
If the registers change on a future platform, the GSC-specific
handling is likely to change as well. (Andrzej)
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224012009.3594691-1-matthew.d.roper@intel.com
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Fixes: 573ba126ae ("drm/i915/guc: Capture error state on context reset")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com
GVT Changes:
- gvt-next stuff mostly with refactor for the new MDEV interface.
i915 Changes:
- PSR fixes and improvements (Jouni)
- DP DSC fixes (Vinod, Jouni)
- More general display cleanups (Jani)
- More display collor management cleanup targetting degamma (Ville)
- remove circ_buf.h includes (Jiri)
- wait power off delay at driver remove to optimize probe (Jani)
- More audio cleanup targeting the ELD precompute readout (Ville)
- Enable DC power states on all eDP ports (Imre)
- RPL-P stepping info (Matt Atwood)
- MTL enabling patches (RK)
- Removal of DG2 force_probe (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
Turns out many of the files that need i915_reg.h get it implicitly via
{display/intel_de.h, gt/intel_context.h} -> i915_trace.h -> i915_irq.h
-> i915_reg.h. Since i915_trace.h doesn't actually need i915_irq.h,
makes sense to drop it, but that requires adding quite a few new
includes all over the place.
Prefer including i915_reg.h where needed instead of adding another
implicit include, because eventually we'll want to split up i915_reg.h
and only include the specific registers at each place.
Also some places actually needed i915_irq.h too.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6e78a2e0ac1bffaf5af3b5ccc21dff05e6518cef.1668008071.git.jani.nikula@intel.com
A workaround was added to the driver to allow compute workloads to run
'forever' by disabling pre-emption on the RCS engine for Gen12.
It is not totally unbound as the heartbeat will kick in eventually
and cause a reset of the hung engine.
However, this does not work well in GuC submission mode. In GuC mode,
the pre-emption timeout is how GuC detects hung contexts and triggers
a per engine reset. Thus, disabling the timeout means also losing all
per engine reset ability. A full GT reset will still occur when the
heartbeat finally expires, but that is a much more destructive and
undesirable mechanism.
The purpose of the workaround is actually to give compute tasks longer
to reach a pre-emption point after a pre-emption request has been
issued. This is necessary because Gen12 does not support mid-thread
pre-emption and compute tasks can have long running threads.
So, rather than disabling the timeout completely, just set it to a
'long' value.
v2: Review feedback from Tvrtko - must hard code the 'long' value
instead of determining it algorithmically. So make it an extra CONFIG
definition. Also, remove the execlist centric comment from the
existing pre-emption timeout CONFIG option given that it applies to
more than just execlists.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006213813.1563435-5-John.C.Harrison@Intel.com
GuC converts the pre-emption timeout and timeslice quantum values into
clock ticks internally. That significantly reduces the point of 32bit
overflow. On current platforms, worst case scenario is approximately
110 seconds. Rather than allowing the user to set higher values and
then get confused by early timeouts, add limits when setting these
values.
v2: Add helper functions for clamping (review feedback from Tvrtko).
v3: Add a bunch of BUG_ON range checks in addition to the checks
already in the clamping functions (Tvrtko)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006213813.1563435-2-John.C.Harrison@Intel.com
Gen8 was the first time our hardware had multicast registers (or at
least the first time the multicast nature was exposed and MMIO accesses
could be steered). There are some registers that transitioned from
singleton behavior to multicast during the gen7 -> gen8 transition;
let's duplicate the register definitions for those registers in
preparation for upcoming patches that will handle MCR registers in a
special manner.
The registers adjusted are:
* MISCCPCTL
* SAMPLER_INSTDONE
* ROW_INSTDONE
* ROW_CHICKEN2
* HALF_SLICE_CHICKEN1
* HALF_SLICE_CHICKEN3
v2:
- Use the gen8 version of HALF_SLICE_CHICKEN3 in GVT's gen9 engine MMIO
list. (Bala)
- Update to the gen8 version of MISCCPCTL in a couple new workarounds
that were recently added for DG2/PVC. (Bala)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014230239.1023689-2-matthew.d.roper@intel.com
Support for reading the fuses to check what are the Link Copy engines
was added in commit ad5f74f342 ("drm/i915/pvc: read fuses for link
copy engines"). However they were added unconditionally because the
FUSE3 register is present since graphics version 10.
However the bitfield with meml3 fuses only exists since graphics version
12. Moreover, Link Copy engines are currently only available in PVC.
Tying additional copy engines to the meml3 fuses is not correct for
other platforms.
Make sure there is a check for `12.60 <= ver < 12.70`. Later platforms
may extend this function later if it's needed to fuse off copy engines.
Currently it's harmless as the Link Copy engines are still not exported:
info->engine_mask only has BCS0 set and the register is only read for
platforms that do have it.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220912-copy-engine-v1-1-ef92fd81758d@intel.com
We're going to introduce an additional intel_gt for MTL's media unit
soon. Let's provide a bit more multi-GT initialization framework in
preparation for that. The initialization will pull the list of GTs for
a platform from the device info structure. Although necessary for the
immediate MTL media enabling, this same framework will also be used
farther down the road when we enable remote tiles on xehpsdv and pvc.
v2:
- Re-add missing test for !HAS_EXTRA_GT_LIST in intel_gt_probe_all().
v3:
- Move intel_gt_definition struct to intel_gt_types.h. (Jani)
- Drop gtdef->setup(). For now we'll just use a switch() based on GT
type since we don't have too many different handlers for the
foreseeable future. (Jani)
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906234934.3655440-6-matthew.d.roper@intel.com
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Although all DSS belong to a single pool on Xe_HP platforms (i.e.,
they're not organized into slices from a topology point of view), we do
still need to pass 'group' and 'instance' targets when steering register
accesses to a specific instance of a per-DSS multicast register. The
rules for how to determine group and instance IDs (which previously used
legacy terms "slice" and "subslice") varies by platform. Some platforms
determine steering by gslice membership, some platforms by cslice
membership, and future platforms may have other rules.
Since looping over each DSS and performing steered unicast register
accesses is a relatively common pattern, let's add a dedicated iteration
macro to handle this (and replace the platform-specific "instdone" loop
we were using previously. This will avoid the calling code needing to
figure out the details about how to obtain steering IDs for a specific
DSS.
Most of the places where we use this new loop are in the GPU errorstate
code at the moment, but we do have some additional features coming in
the future that will also need to loop over each DSS and steer some
register accesses accordingly.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
For execlists backend, current implementation of Wa_22011802037 is to
stop the CS before doing a reset of the engine. This WA was further
extended to wait for any pending MI FORCE WAKEUPs before issuing a
reset. Add the extended steps in the execlist path of reset.
In addition, extend the WA to gen11.
v2: (Tvrtko)
- Clarify comments, commit message, fix typos
- Use IS_GRAPHICS_VER for gen 11/12 checks
v3: (Daneile)
- Drop changes to intel_ring_submission since WA does not apply to it
- Log an error if MSG IDLE is not defined for an engine
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: f6aa0d713c ("drm/i915: Add Wa_22011802037 force cs halt")
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com
Let's replace the assortment of intel_gt_* and intel_uncore_* functions
that operate on MCR registers with a cleaner set of interfaces:
* intel_gt_mcr_read -- unicast read from specific instance
* intel_gt_mcr_read_any[_fw] -- unicast read from any non-terminated
instance
* intel_gt_mcr_unicast_write -- unicast write to specific instance
* intel_gt_mcr_multicast_write[_fw] -- multicast write to all instances
We'll also replace the historic "slice" and "subslice" terminology with
"group" and "instance" to match the documentation for more recent
platforms; these days MCR steering applies to more types of replication
than just slice/subslice.
v2:
- Reference the new kerneldoc from i915.rst. (Jani)
- Tweak the wording of the documentation for a couple functions to
clarify the difference between "_fw" and non-"_fw" forms.
v3:
- s/read/write/ to fix copy-paste mistake in a couple comments.
(Harish)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-3-matthew.d.roper@intel.com
Handling of multicast/replicated registers is spread across intel_gt.c
and intel_uncore.c today. As multicast handling and the related
steering logic gets more complicated with the addition of new platforms
and new rules it makes sense to centralize it all in one place.
For now the existing functions have been moved to the new .c/.h as-is.
Function renames and updates to operate in a more consistent manner will
be done in subsequent patches.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220615001019.1821989-2-matthew.d.roper@intel.com
As with EU masks, it's easier to store subslice/DSS masks internally in
a format that's more natural for the driver to work with, and then only
covert into the u8[] uapi form when the query ioctl is invoked. Since
the hardware design changed significantly with Xe_HP, we'll use a union
to choose between the old "hsw-style" subslice masks or the newer xehp
mask. HSW-style masks will be stored in an array of u8's, indexed by
slice (there's never more than 6 subslices per slice on older
platforms). For Xe_HP and beyond where slices no longer exist, we only
need a single bitmask. However we already know that this mask is
eventually going to grow too large for a simple u64 to hold, so we'll
represent it in a manner that can be operated on by the utilities in
linux/bitmap.h.
v2:
- Fix typo: BIT(s) -> BIT(ss) in gen9_sseu_device_status()
v3:
- Eliminate sseu->ss_stride and just calculate the stride while
specifically handling uapi. (Tvrtko)
- Use BITMAP_BITS() macro to refer to size of masks rather than
passing I915_MAX_SS_FUSE_BITS directly. (Tvrtko)
- Report compute/geometry DSS masks separately when dumping Xe_HP SSEU
info. (Tvrtko)
- Restore dropped range checks to intel_sseu_has_subslice(). (Tvrtko)
v4:
- Make the bitmap size macro check the size of the .xehp field rather
than the containing union. (Tvrtko)
- Don't add GEM_BUG_ON() intel_sseu_has_subslice()'s check for whether
slice or subslice ID exceed sseu->max_[sub]slices; various loops
in the driver are expected to exceed these, so we should just
silently return 'false.'
v5:
- Move XEHP_BITMAP_BITS() to the header so that we can also replace a
usage of I915_MAX_SS_FUSE_BITS in one of the inline functions.
(Bala)
- Change the local variable in intel_slicemask_from_xehp_dssmask() from
u16 to 'unsigned long' to make it a bit more future-proof.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220601150725.521468-6-matthew.d.roper@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sync up with v5.18-rc1, in particular to get 5e3094cfd9
("drm/i915/xehpsdv: Add has_flat_ccs to device info").
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Print the GuC captured error state register list (string names
and values) when gpu_coredump_state printout is invoked via
the i915 debugfs for flushing the gpu error-state that was
captured prior.
Since GuC could have reported multiple engine register dumps
in a single notification event, parse the captured data
(appearing as a stream of structures) to identify each dump as
a different 'engine-capture-group-output'.
Finally, for each 'engine-capture-group-output' that is found,
verify if the engine register dump corresponds to the
engine_coredump content that was previously populated by the
i915_gpu_coredump function. That function would have copied
the context's vma's including the bacth buffer during the
G2H-context-reset notification that occurred earlier. Perform
this verification check by comparing guc_id, lrca and engine-
instance obtained from the 'engine-capture-group-output' vs a
copy of that same info taken during i915_gpu_coredump. If
they match, then print those vma's as well (such as the batch
buffers).
NOTE: the output format was verified using the gem_exec_capture
IGT test.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-14-alan.previn.teres.alexis@intel.com
Add logical mapping for VDBOXs. This mapping is required for
split-frame workloads, which otherwise fail with
00000000-F8C53528: [GUC] 0441-INVALID_ENGINE_SUBMIT_MASK
... if the application is using the logical id to reorder the engines and
then using it for the batch buffer submission. It's not a big problem on
media version 11 and 12 as they have only 2 instances of VCS and the
logical to physical mapping is monotonically increasing - if the
application is not using the logical id.
Changing it for the previous platforms allows the media driver
implementation for the next ones (12.50 and above) to be the same,
checking the logical id. It should also not introduce any bug for the
old versions of userspace not checking the id.
The mapping added here is the complete map needed by XEHPSDV. Previous
platforms with only 2 instances will just use a partial map and should
still work.
v2: Remove static from map variable (José)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
[ Extend the mapping to media versions 11 and 12 and give proper
justification in the commit message why ]
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-2-lucas.demarchi@intel.com
In the past we've always assumed that an RCS engine is present on every
platform. However now that we have compute engines there may be
platforms that have CCS engines but no RCS, or platforms that are
designed to have both, but have the RCS engine fused off.
Various engine-centric initialization that only needs to be done a
single time for the group of RCS+CCS engines can't rely on being setup
with the RCS now; instead we add a I915_ENGINE_FIRST_RENDER_COMPUTE flag
that will be assigned to a single engine in the group; whichever engine
has this flag will be responsible for some of the general setup
(RCU_MODE programming, initialization of certain workarounds, etc.).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-1-matthew.d.roper@intel.com
HW resources are divided across the active CCS engines at the compute
slice level, with each CCS having priority on one of the cslices.
If a compute slice has no enabled DSS, its paired compute engine is not
usable in full parallel execution because the other ones already fully
saturate the HW, so consider it fused off.
v2 (José):
- moved it to its own function
- fixed definition of ccs_mask
v3 (Matt):
- Replace fls() condition with a simple IP version test
v4 (Matt):
- Don't try to calculate a ccs_mask using
intel_slicemask_from_dssmask() until we've determined that we're
running on an Xe_HP platform where the logic makes sense (and won't
overflow).
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302052008.1884985-1-matthew.d.roper@intel.com
