commit 1a5352a81b upstream.
The ath11k active pdevs are protected by RCU but the temperature event
handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a
read-side critical section as reported by RCU lockdep:
=============================
WARNING: suspicious RCU usage
6.6.0-rc6 #7 Not tainted
-----------------------------
drivers/net/wireless/ath/ath11k/mac.c:638 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
...
Call trace:
...
lockdep_rcu_suspicious+0x16c/0x22c
ath11k_mac_get_ar_by_pdev_id+0x194/0x1b0 [ath11k]
ath11k_wmi_tlv_op_rx+0xa84/0x2c1c [ath11k]
ath11k_htc_rx_completion_handler+0x388/0x510 [ath11k]
Mark the code in question as an RCU read-side critical section to avoid
any potential use-after-free issues.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Fixes: a41d10348b ("ath11k: add thermal sensor device support")
Cc: stable@vger.kernel.org # 5.7
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231019153115.26401-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 499d027904 ]
Currently we are setting the rate in the tx cmd for
mgmt frames (e.g. during connection establishment).
This was problematic when sending mgmt frames in eSR mode,
as we don't know what link this frame will be sent on
(This is decided by the FW), so we don't know what is the
lowest rate.
Fix this by not setting the rate in tx cmd and rely
on FW to choose the right one.
Set rate only for injected frames with fixed rate,
or when no sta is given.
Also set for important frames (EAPOL etc.) the High Priority flag.
Fixes: 055b22e770 ("iwlwifi: mvm: Set Tx rate and flags when there is not station")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 170c75d43a ]
As talked about in commit d66d24ac30 ("ath10k: Keep track of which
interrupts fired, don't poll them"), if we access the copy engine
register at a bad time then ath10k can go boom. However, it's not
necessarily easy to know when it's safe to access them.
The ChromeOS test labs saw a crash that looked like this at
shutdown/reboot time (on a chromeos-5.15 kernel, but likely the
problem could also reproduce upstream):
Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
...
CPU: 4 PID: 6168 Comm: reboot Not tainted 5.15.111-lockdep-19350-g1d624fe6758f #1 010b9b233ab055c27c6dc88efb0be2f4e9e86f51
Hardware name: Google Kingoftown (DT)
...
pc : ath10k_snoc_read32+0x50/0x74 [ath10k_snoc]
lr : ath10k_snoc_read32+0x24/0x74 [ath10k_snoc]
...
Call trace:
ath10k_snoc_read32+0x50/0x74 [ath10k_snoc ...]
ath10k_ce_disable_interrupt+0x190/0x65c [ath10k_core ...]
ath10k_ce_disable_interrupts+0x8c/0x120 [ath10k_core ...]
ath10k_snoc_hif_stop+0x78/0x660 [ath10k_snoc ...]
ath10k_core_stop+0x13c/0x1ec [ath10k_core ...]
ath10k_halt+0x398/0x5b0 [ath10k_core ...]
ath10k_stop+0xfc/0x1a8 [ath10k_core ...]
drv_stop+0x148/0x6b4 [mac80211 ...]
ieee80211_stop_device+0x70/0x80 [mac80211 ...]
ieee80211_do_stop+0x10d8/0x15b0 [mac80211 ...]
ieee80211_stop+0x144/0x1a0 [mac80211 ...]
__dev_close_many+0x1e8/0x2c0
dev_close_many+0x198/0x33c
dev_close+0x140/0x210
cfg80211_shutdown_all_interfaces+0xc8/0x1e0 [cfg80211 ...]
ieee80211_remove_interfaces+0x118/0x5c4 [mac80211 ...]
ieee80211_unregister_hw+0x64/0x1f4 [mac80211 ...]
ath10k_mac_unregister+0x4c/0xf0 [ath10k_core ...]
ath10k_core_unregister+0x80/0xb0 [ath10k_core ...]
ath10k_snoc_free_resources+0xb8/0x1ec [ath10k_snoc ...]
ath10k_snoc_shutdown+0x98/0xd0 [ath10k_snoc ...]
platform_shutdown+0x7c/0xa0
device_shutdown+0x3e0/0x58c
kernel_restart_prepare+0x68/0xa0
kernel_restart+0x28/0x7c
Though there's no known way to reproduce the problem, it makes sense
that it would be the same issue where we're trying to access copy
engine registers when it's not allowed.
Let's fix this by changing how we "disable" the interrupts. Instead of
tweaking the copy engine registers we'll just use disable_irq() and
enable_irq(). Then we'll configure the interrupts once at power up
time.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230630151842.1.If764ede23c4e09a43a842771c2ddf99608f25f8e@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c27aa7de ]
mhi_alloc_controller() allocates a memory space for mhi_ctrl. When some
errors occur, mhi_ctrl should be freed by mhi_free_controller() and set
ab_pci->mhi_ctrl = NULL.
We can fix it by calling mhi_free_controller() when the failure happens
and set ab_pci->mhi_ctrl = NULL in all of the places where we call
mhi_free_controller().
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230922021036.3604157-1-make_ruc2021@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03f0e11da7 ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/mediatek/mt76/mt792x_core.c:4:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/mediatek/mt76/mt7915/main.c:4:
In file included from ./include/linux/etherdevice.h:20:
In file included from ./include/linux/if_ether.h:19:
In file included from ./include/linux/skbuff.h:15:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/mediatek/mt76/mt7996/main.c:6:
In file included from drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h:9:
In file included from ./include/linux/interrupt.h:8:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'mt7915_get_et_strings()',
'mt792x_get_et_strings()' and 'mt7996_get_et_strings()' due to the same
reason: fortification logic inteprets call to 'memcpy()' as an attempt
to copy the whole array from its first member and so issues an overread
warning. These warnings may be silenced by passing an address of the whole
array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fce9c96782 ]
In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is
used, which according to its PCI Vendor ID is from "ITTIM Technology".
This chip works flawlessly with the mt7921e module. The driver doesn't
bind to this PCI device, because the Vendor ID from "ITTIM Technology" is
not recognized.
This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of
PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi
chip.
Signed-off-by: Ingo Rohloff <lundril@gmx.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb4c132ebf ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/ath/ath10k/debug.c:8:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'ath10k_debug_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'ath10k_gstrings_stats' array from it's first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093652.234537-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc44a505a ]
len is extracted from HTT message and could be an unexpected value in
case errors happen, so add validation before using to avoid possible
out-of-bound read in the following message iteration and parsing.
The same issue also applies to ppdu_info->ppdu_stats.common.num_users,
so validate it before using too.
These are found during code review.
Compile test only.
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230901015602.45112-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f97fe0ac ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/ath/ath9k/debug.c:17:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
In file included from drivers/net/wireless/ath/ath9k/htc_drv_debug.c:17:
In file included from drivers/net/wireless/ath/ath9k/htc.h:20:
In file included from ./include/linux/module.h:13:
In file included from ./include/linux/stat.h:19:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'ath9k_get_et_strings()' and
'ath9k_htc_get_et_strings()' due to the same reason: fortification logic
inteprets call to 'memcpy()' as an attempt to copy the whole array from
it's first member and so issues an overread warning. These warnings may
be silenced by passing an address of the whole array and not the first
member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230829093856.234584-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbaccdc424 ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/virtual/mac80211_hwsim.c:18:
In file included from ./include/linux/slab.h:16:
In file included from ./include/linux/gfp.h:7:
In file included from ./include/linux/mmzone.h:8:
In file included from ./include/linux/spinlock.h:56:
In file included from ./include/linux/preempt.h:79:
In file included from ./arch/x86/include/asm/preempt.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/x86/include/asm/thread_info.h:53:
In file included from ./arch/x86/include/asm/cpufeature.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'mac80211_hwsim_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy the
whole 'mac80211_hwsim_gstrings_stats' array from its first member and so
issues an overread warning. This warning may be silenced by passing
an address of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20230829094140.234636-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbc86757ca ]
When max virtual ap interfaces are configured in all the bands with
ACS and hostapd restart is done every 60s, a crash is observed at
random times.
In the above scenario, a fragmented packet is received for self peer,
for which rx_tid and rx_frags are not initialized in datapath.
While handling this fragment, crash is observed as the rx_frag list
is uninitialized and when we walk in ath12k_dp_rx_h_sort_frags,
skb null leads to exception.
To address this, before processing received fragments we check
dp_setup_done flag is set to ensure that peer has completed its
dp peer setup for fragment queue, else ignore processing the
fragments.
Call trace:
PC points to "ath12k_dp_process_rx_err+0x4e8/0xfcc [ath12k]"
LR points to "ath12k_dp_process_rx_err+0x480/0xfcc [ath12k]".
The Backtrace obtained is as follows:
ath12k_dp_process_rx_err+0x4e8/0xfcc [ath12k]
ath12k_dp_service_srng+0x78/0x260 [ath12k]
ath12k_pci_write32+0x990/0xb0c [ath12k]
__napi_poll+0x30/0xa4
net_rx_action+0x118/0x270
__do_softirq+0x10c/0x244
irq_exit+0x64/0xb4
__handle_domain_irq+0x88/0xac
gic_handle_irq+0x74/0xbc
el1_irq+0xf0/0x1c0
arch_cpu_idle+0x10/0x18
do_idle+0x104/0x248
cpu_startup_entry+0x20/0x64
rest_init+0xd0/0xdc
arch_call_rest_init+0xc/0x14
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230821130343.29495-2-quic_hprem@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a763e92c78 ]
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've
noticed the following (somewhat confusing due to absence of an actual
source code location):
In file included from drivers/net/wireless/purelifi/plfxlc/mac.c:6:
In file included from ./include/linux/netdevice.h:24:
In file included from ./include/linux/timer.h:6:
In file included from ./include/linux/ktime.h:24:
In file included from ./include/linux/time.h:60:
In file included from ./include/linux/time32.h:13:
In file included from ./include/linux/timex.h:67:
In file included from ./arch/x86/include/asm/timex.h:5:
In file included from ./arch/x86/include/asm/processor.h:23:
In file included from ./arch/x86/include/asm/msr.h:11:
In file included from ./arch/x86/include/asm/cpumask.h:5:
In file included from ./include/linux/cpumask.h:12:
In file included from ./include/linux/bitmap.h:11:
In file included from ./include/linux/string.h:254:
./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field'
declared with 'warning' attribute: detected read beyond size of field (2nd
parameter); maybe use struct_group()? [-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
The compiler actually complains on 'plfxlc_get_et_strings()' where
fortification logic inteprets call to 'memcpy()' as an attempt to copy
the whole 'et_strings' array from its first member and so issues an
overread warning. This warning may be silenced by passing an address
of the whole array and not the first member to 'memcpy()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230829094541.234751-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 658939fc68 ]
If a TX queue has no space for new TX frames, the driver will keep
these frames in the overflow queue, and during reclaim flow it
will retry to send the frames from that queue.
But if the reclaim flow was invoked from TX queue flush, we will also
TX these frames, which is wrong as we don't want to TX anything
after flush.
This might also cause assert 0x125F when removing the queue,
saying that the driver removes a non-empty queue
Fix this by TXing the overflow queue's frames only if we are
not in flush queue flow.
Fixes: a445098058 ("iwlwifi: move reclaim flows to the queue file")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231022173519.caf06c8709d9.Ibf664ccb3f952e836f8fa461ea58fc08e5c46e88@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea2274ab0b ]
When frames are sent over the air, the device always applies the data
rates in descending order. The driver assumed Minstrel also provided
rate in descending order.
However, in some cases, Minstrel can a choose a fallback rate greater
than the primary rate. In this case, the two rates was inverted, the
device try highest rate first and we get many retries.
Since the device always applies rates in descending order, the
workaround is to drop the rate when it higher than its predecessor in
the rate list. Thus [ 4, 5, 3 ] becomes [ 4, 3 ].
This patch has been tested in isolated room with a series of
attenuators. Here are the Minstrel statistics with 80dBm of attenuation:
Without the fix:
best ____________rate__________ ____statistics___ _____last____ ______sum-of________
mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts]
HT20 LGI 1 S MCS0 0 1477 5.6 5.2 82.7 3 0 0 3 4
HT20 LGI 1 MCS1 1 738 10.6 0.0 0.0 0 0 0 0 1
HT20 LGI 1 D MCS2 2 492 14.9 13.5 81.5 5 0 0 5 9
HT20 LGI 1 C MCS3 3 369 18.8 17.6 84.3 5 0 0 76 96
HT20 LGI 1 A P MCS4 4 246 25.4 22.4 79.5 5 0 0 11268 14026
HT20 LGI 1 B S MCS5 5 185 30.7 19.7 57.7 5 8 9 3918 9793
HT20 LGI 1 MCS6 6 164 33.0 0.0 0.0 5 0 0 6 102
HT20 LGI 1 MCS7 7 148 35.1 0.0 0.0 0 0 0 0 44
With the fix:
best ____________rate__________ ____statistics___ _____last____ ______sum-of________
mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts]
HT20 LGI 1 S MCS0 0 1477 5.6 1.8 28.6 1 0 0 1 5
HT20 LGI 1 DP MCS1 1 738 10.6 9.7 82.6 4 0 0 14 34
HT20 LGI 1 MCS2 2 492 14.9 9.2 55.4 5 0 0 52 77
HT20 LGI 1 B S MCS3 3 369 18.8 15.6 74.9 5 1 1 417 554
HT20 LGI 1 A MCS4 4 246 25.4 16.7 59.2 5 1 1 13812 17951
HT20 LGI 1 C S MCS5 5 185 30.7 14.0 41.0 5 1 5 57 640
HT20 LGI 1 MCS6 6 164 33.0 0.0 0.0 0 0 1 0 48
HT20 LGI 1 S MCS7 7 148 35.1 0.0 0.0 0 0 0 0 36
We can notice the device try now to send with lower rates (and high
success rates). At the end, we measured 20-25% better throughput with
this patch.
Fixes: 9bca45f3d6 ("staging: wfx: allow to send 802.11 frames")
Tested-by: Olivier Souloumiac <olivier.souloumiac@silabs.com>
Tested-by: Alexandr Suslenko <suslenko.o@ajax.systems>
Reported-by: Alexandr Suslenko <suslenko.o@ajax.systems>
Co-developed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Felipe Negrelli Wolter <felipe.negrelliwolter@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004123039.157112-1-jerome.pouiller@silabs.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77f1ee6fd8 ]
Tx power is fetched from firmware's pdev stats. However, during active
CAC, firmware does not fill the current Tx power and sends the max
initialised value filled during firmware init. If host sends this power
to user space, this is wrong since in certain situations, the Tx power
could be greater than the max allowed by the regulatory. Hence, host
should not be fetching the Tx power during an active CAC.
Fix this issue by returning -EAGAIN error so that user space knows that there's
no valid value available.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Fixes: 9a2aa68afe ("wifi: ath11k: add get_txpower mac ops")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230912051857.2284-4-quic_adisi@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3391ee7f9e ]
In 'rtl92c_dm_check_edca_turbo()', 'rtl88e_dm_check_edca_turbo()',
and 'rtl8723e_dm_check_edca_turbo()', the DL limit should be set
from the corresponding field of 'rtlpriv->btcoexist' rather than
UL. Compile tested only.
Fixes: 0529c6b817 ("rtlwifi: rtl8723ae: Update driver to match 06/28/14 Realtek version")
Fixes: c151aed6aa ("rtlwifi: rtl8188ee: Update driver to match Realtek release of 06282014")
Fixes: beb5bc4020 ("rtlwifi: rtl8192c-common: Convert common dynamic management routines for addition of rtl8192se and rtl8192de")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230928052327.120178-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c558d22e7a ]
The variable band should be determined by the ieee80211_chanctx_conf when
the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we
added the extension to mt76_connac2_mac_tx_rate_val and
mt76_connac_get_he_phy_cap for the firmware can select the proper rate.
Fixes: 41ac53c899 ("wifi: mt76: mt7921: introduce chanctx support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: David Ruth <druth@chromium.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32b1000db2 ]
The variable band should be determined by the ieee80211_chanctx_conf when
the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we
added the extension to mt76_connac2_mac_tx_rate_val by distinguishing if
it can support chanctx to fix the incorrect rate pickup.
Fixes: 41ac53c899 ("wifi: mt76: mt7921: introduce chanctx support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: David Ruth <druth@chromium.org>
Tested-by: David Ruth <druth@chromium.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f502065559 ]
Move struct ieee80211_chanctx_conf up to struct mt76_vif to allow the
connac2 library can access the struct ieee80211_chanctx_conf * member in
struct mt76_vif.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: David Ruth <druth@chromium.org>
Tested-by: David Ruth <druth@chromium.org>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 32b1000db2 ("wifi: mt76: mt7921: fix the wrong rate pickup for the chanctx driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ced1a0b8f3 ]
Without this patch, when ap sets the tx stream number to 2,
ap won't send any beamforming packet.
Fixes: f89f297aef ("mt76: mt7915: fix txbf starec TLV issues")
Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 413f05d68d ]
When the set_chan_info command is set with CH_SWITCH_NORMAL reason,
even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some
unexpected tones, which might confuse DFS CAC tests that there are some
tone leakages. To get rid of these kinds of false alarms, always bypass
DPD calibration when IEEE80211_CONF_IDLE is set.
Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: c685034cab ("wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparison")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0197923ecf ]
RX vector reports channel bandwidth 320-1 and 320-2 with different
values. Fix it to correctly report rx rate when using CBW320-2.
Fixes: 80f5a31d28 ("wifi: mt76: mt7996: add support for EHT rate report")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e19028104b ]
According to P802.11be_D3.2 Table 9-404m, the minimum value of
Beamformee SS field shall be 3. Fix the values to follow the spec.
Fixes: 348533eb96 ("wifi: mt76: mt7996: add EHT capability init")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d40fd59b72 ]
The bf_num field represents how many bands can support beamform, so set
the value to 3, and bf_bitmap represents the bitmap of bf_num.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bde2e77f76 ]
Set correct wcid in txp to let the SDO hw module look into the correct
wtbl, otherwise the tx descriptor may be wrongly fiiled. This patch also
fixed the issue that driver could not correctly report sta statistics,
especially in WDS mode, which misled AQL.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
