[ Upstream commit 56cfb8ce1f ]
There may be sometimes reasons to actually run the work
if it's pending, add flush functions for both regular and
delayed wiphy work that will do this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: eadfb54756 ("wifi: mac80211: move sched-scan stop work to wiphy work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
The warning here shouldn't be done before we even set the
bss field (or should've used the input data). Move the
assignment before the warning to fix it.
We noticed this now because of Wen's bugfix, where the bug
fixed there had previously hidden this other bug.
Fixes: 53ad07e982 ("wifi: cfg80211: support reporting failed links")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since wiphy work items can run pretty much arbitrary
code in the stack/driver, it can take longer to run
all of this, so we shouldn't be using system_wq via
schedule_work(). Also, we lock the wiphy (which is
the reason this exists), so use system_unbound_wq.
Reported-and-tested-by: Kalle Valo <kvalo@kernel.org>
Fixes: a3ee4dc84c ("wifi: cfg80211: add a work abstraction with special semantics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Max Schulze reports crashes with brcmfmac. The reason seems
to be a race between userspace removing the CQM config and
the driver calling cfg80211_cqm_rssi_notify(), where if the
data is freed while cfg80211_cqm_rssi_notify() runs it will
crash since it assumes wdev->cqm_config is set. This can't
be fixed with a simple non-NULL check since there's nothing
we can do for locking easily, so use RCU instead to protect
the pointer, but that requires pulling the updates out into
an asynchronous worker so they can sleep and call back into
the driver.
Since we need to change the free anyway, also change it to
go back to the old settings if changing the settings fails.
Reported-and-tested-by: Max Schulze <max.schulze@online.de>
Closes: https://lore.kernel.org/r/ac96309a-8d8d-4435-36e6-6d152eb31876@online.de
Fixes: 4a4b816950 ("cfg80211: Accept multiple RSSI thresholds for CQM")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The previous commit dd3e4fc75b ("nl80211/cfg80211: add BSS color to
NDP ranging parameters") adds a parameter for NDP ranging by introducing
a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR.
However, the author forgot to also describe the nla_policy at
nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just
complement it to avoid malformed attribute that causes out-of-attribute
access.
Fixes: dd3e4fc75b ("nl80211/cfg80211: add BSS color to NDP ranging parameters")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809033151.768910-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.
Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.
Fix this by checking for a maximum of 255 elements in attrs.
Cc: stable@vger.kernel.org
Fixes: dc1e3cb8da ("nl80211: MBSSID and EMA support in AP mode")
Signed-off-by: Keith Yeo <keithyjy@gmail.com>
Link: https://lore.kernel.org/r/20230731034719.77206-1-keithyjy@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
STA MLD setup links may get removed if AP MLD remove the corresponding
affiliated APs with Multi-Link reconfiguration as described in
P802.11be_D3.0, section 35.3.6.2.2 Removing affiliated APs. Currently,
there is no support to notify such operation to cfg80211 and userspace.
Add support for the drivers to indicate STA MLD setup links removal to
cfg80211 and notify the same to userspace. Upon receiving such
indication from the driver, clear the MLO links information of the
removed links in the WDEV.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230317142153.237900-1-quic_vjakkam@quicinc.com
[rename function and attribute, fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The basic multi-link element within an multi-link probe response will
contain full information about BSSes that are part of an MLD AP. This
BSS information may be used to associate with a link of an MLD AP
without having received a beacon from the BSS itself.
This patch adds parsing of the data and adding/updating the BSS using
the received elements. Doing this means that userspace can discover the
BSSes using an ML probe request and request association on these links.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230618214436.29593bd0ae1f.Ic9a67b8f022360aa202b870a932897a389171b14@changeid
[swap loop conditions smatch complained about]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The removed code ran for any BSS that was not included in the MBSSID
element in order to update it. However, instead of using the correct
inheritance rules, it would simply copy the elements from the
transmitting AP. The result is that we would report incorrect elements
in this case.
After some discussions, it seems that there are likely not even APs
actually using this feature. Either way, removing the code decreases
complexity and makes the cfg80211 behaviour more correct.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.cfd6d8db1f26.Ia1044902b86cd7d366400a4bfb93691b8f05d68c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The cfg80211_gen_new_ie function merges the IEs using inheritance rules.
Rewrite this function to fix issues around inheritance rules. In
particular, vendor elements do not require any special handling, as they
are either all inherited or overridden by the subprofile.
Also, add fragmentation handling as this may be needed in some cases.
This also changes the function to not require making a copy. The new
version could be optimized a bit by explicitly tracking which IEs have
been handled already rather than looking that up again every time.
Note that a small behavioural change is the removal of the SSID special
handling. This should be fine for the MBSSID element, as the SSID must
be included in the subelement.
Fixes: 0b8fb8235b ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.bc6152e146db.I2b5f3bc45085e1901e5b5192a674436adaf94748@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wstringop-overflow is legitimately warning us about extra_size
pontentially being zero at some point, hence potenially ending
up _allocating_ zero bytes of memory for extra pointer and then
trying to access such object in a call to copy_from_user().
Fix this by adding a sanity check to ensure we never end up
trying to allocate zero bytes of data for extra pointer, before
continue executing the rest of the code in the function.
Address the following -Wstringop-overflow warning seen when built
m68k architecture with allyesconfig configuration:
from net/wireless/wext-core.c:11:
In function '_copy_from_user',
inlined from 'copy_from_user' at include/linux/uaccess.h:183:7,
inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:825:7:
arch/m68k/include/asm/string.h:48:25: warning: '__builtin_memset' writing 1 or more bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
48 | #define memset(d, c, n) __builtin_memset(d, c, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/uaccess.h:153:17: note: in expansion of macro 'memset'
153 | memset(to + (n - res), 0, res);
| ^~~~~~
In function 'kmalloc',
inlined from 'kzalloc' at include/linux/slab.h:694:9,
inlined from 'ioctl_standard_iw_point' at net/wireless/wext-core.c:819:10:
include/linux/slab.h:577:16: note: at offset 1 into destination object of size 0 allocated by '__kmalloc'
577 | return __kmalloc(size, flags);
| ^~~~~~~~~~~~~~~~~~~~~~
This help with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/315
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZItSlzvIpjdjNfd8@work
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are some locking changes that will later otherwise
cause conflicts, so merge wireless into wireless-next to
avoid those.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
