commit 3a75b205de upstream.
gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all
timers, removing the virtual tty devices and clearing the data queues.
This procedure, however, may cause subsequent changes of the virtual modem
status lines of a DLCI. More data is being added the outgoing data queue
and the deleted kick timer is restarted to handle this. At this point many
resources have already been removed by the cleanup procedure. Thus, a
kernel panic occurs.
Fix this by proving in gsm_modem_update() that the cleanup procedure has
not been started and the mux is still alive.
Note that writing to a virtual tty is already protected by checks against
the DLCI specific connection state.
Fixes: c568f7086c ("tty: n_gsm: fix missing timer to handle stalled links")
Cc: stable <stable@kernel.org>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20231026055844.3127-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8033bde45 upstream.
Currently, if a USB request that was queued by Raw Gadget is interrupted
(via a signal), wait_for_completion_interruptible returns -ERESTARTSYS.
Raw Gadget then attempts to propagate this value to userspace as a return
value from its ioctls. However, when -ERESTARTSYS is returned by a syscall
handler, the kernel internally restarts the syscall.
This doesn't allow userspace applications to interrupt requests queued by
Raw Gadget (which is required when the emulated device is asked to switch
altsettings). It also violates the implied interface of Raw Gadget that a
single ioctl must only queue a single USB request.
Instead, make Raw Gadget do what GadgetFS does: check whether the request
was interrupted (dequeued with status == -ECONNRESET) and report -EINTR to
userspace.
Fixes: f2c2e71764 ("usb: gadget: add raw-gadget interface")
Cc: stable <stable@kernel.org>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/0db45b1d7cc466e3d4d1ab353f61d63c977fbbc5.1698350424.git.andreyknvl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4987daf86c upstream.
It is possible that typec_register_partner() returns ERR_PTR on failure.
When port->partner is an error, a NULL pointer dereference may occur as
shown below.
[91222.095236][ T319] typec port0: failed to register partner (-17)
...
[91225.061491][ T319] Unable to handle kernel NULL pointer dereference
at virtual address 000000000000039f
[91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc
[91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc
[91225.308067][ T319] Call trace:
[91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc
[91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8
[91225.355900][ T319] kthread_worker_fn+0x178/0x58c
[91225.355902][ T319] kthread+0x150/0x200
[91225.355905][ T319] ret_from_fork+0x10/0x30
Add a check for port->partner to avoid dereferencing a NULL pointer.
Fixes: 5e1d4c49fb ("usb: typec: tcpm: Determine common SVDM Version")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://lore.kernel.org/r/20231020012132.100960-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e6f3b6d2c upstream.
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be
operated as either a USB Host or a USB Device, similar to on the AMD Nolan
platform.
be6646bfba ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD
device") added a quirk to let the dwc3 driver claim the Nolan device since
it provides more specific support.
Extend that quirk to include the VanGogh SoC USB3 device.
Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com
Signed-off-by: Vicki Pfau <vi@endrift.com>
[bhelgaas: include be6646bfba reference, add stable tag]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v3.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 020010fbfa upstream
There exists a race between holding a reference of an eventfs_inode dentry
and the freeing of the eventfs_inode. If user space has a dentry held long
enough, it may still be able to access the dentry's eventfs_inode after it
has been freed.
To prevent this, have he eventfs_inode freed via the last dput() (or via
RCU if the eventfs_inode does not have a dentry).
This means reintroducing the eventfs_inode del_list field at a temporary
place to put the eventfs_inode. It needs to mark it as freed (via the
list) but also must invalidate the dentry immediately as the return from
eventfs_remove_dir() expects that they are. But the dentry invalidation
must not be called under the eventfs_mutex, so it must be done after the
eventfs_inode is marked as free (put on a deletion list).
Link: https://lkml.kernel.org/r/20231101172650.123479767@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 5bdcd5f533 ("eventfs: Implement removal of meta data from eventfs")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2f496370a upstream
The eventfs_inode->is_freed was a union with the rcu_head with the
assumption that when it was on the srcu list the head would contain a
pointer which would make "is_freed" true. But that was a wrong assumption
as the rcu head is a single link list where the last element is NULL.
Instead, split the nr_entries integer so that "is_freed" is one bit and
the nr_entries is the next 31 bits. As there shouldn't be more than 10
(currently there's at most 5 to 7 depending on the config), this should
not be a problem.
Link: https://lkml.kernel.org/r/20231101172649.049758712@goodmis.org
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ajay Kaher <akaher@vmware.com>
Fixes: 6394044955 ("eventfs: Implement eventfs lookup, read, open functions")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb32500fb9 upstream
The following can crash the kernel:
# cd /sys/kernel/tracing
# echo 'p:sched schedule' > kprobe_events
# exec 5>>events/kprobes/sched/enable
# > kprobe_events
# exec 5>&-
The above commands:
1. Change directory to the tracefs directory
2. Create a kprobe event (doesn't matter what one)
3. Open bash file descriptor 5 on the enable file of the kprobe event
4. Delete the kprobe event (removes the files too)
5. Close the bash file descriptor 5
The above causes a crash!
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:tracing_release_file_tr+0xc/0x50
What happens here is that the kprobe event creates a trace_event_file
"file" descriptor that represents the file in tracefs to the event. It
maintains state of the event (is it enabled for the given instance?).
Opening the "enable" file gets a reference to the event "file" descriptor
via the open file descriptor. When the kprobe event is deleted, the file is
also deleted from the tracefs system which also frees the event "file"
descriptor.
But as the tracefs file is still opened by user space, it will not be
totally removed until the final dput() is called on it. But this is not
true with the event "file" descriptor that is already freed. If the user
does a write to or simply closes the file descriptor it will reference the
event "file" descriptor that was just freed, causing a use-after-free bug.
To solve this, add a ref count to the event "file" descriptor as well as a
new flag called "FREED". The "file" will not be freed until the last
reference is released. But the FREE flag will be set when the event is
removed to prevent any more modifications to that event from happening,
even if there's still a reference to the event "file" descriptor.
Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: f5ca233e2e ("tracing: Increase trace array ref count on enable and filter files")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9cdeb58a9 ]
Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.
evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.
From Stephane:
The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,
perf record -a -e cpu/event=0x3c,period=10000000/.
On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.
Fixes: 5bae025023 ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull misc x86 fixes from Ingo Molnar:
- Fix a possible CPU hotplug deadlock bug caused by the new TSC
synchronization code
- Fix a legacy PIC discovery bug that results in device troubles on
affected systems, such as non-working keybards, etc
- Add a new Intel CPU model number to <asm/intel-family.h>
* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Defer marking TSC unstable to a worker
x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
x86/cpu: Add model number for Intel Arrow Lake mobile processor
Pull irq fix from Ingo Molnar:
"Restore unintentionally lost quirk settings in the GIC irqchip driver,
which broke certain devices"
* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Don't override quirk settings with default values
Pull probes fixes from Masami Hiramatsu:
- tracing/kprobes: Fix kernel-doc warnings for the variable length
arguments
- tracing/kprobes: Fix to count the symbols in modules even if the
module name is not specified so that user can probe the symbols in
the modules without module name
* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix symbol counting logic by looking at modules as well
tracing/kprobes: Fix the description of variable length arguments
Pull dma-mapping fix from Christoph Hellwig:
- reduce the initialy dynamic swiotlb size to remove an annoying but
harmless warning from the page allocator (Petr Tesarik)
* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
Pull i2c fixes from Wolfram Sang:
"Bugfixes for Axxia when it is a target and for PEC handling of
stm32f7.
Plus, fix an OF node leak pattern in the mux subsystem"
* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
i2c: aspeed: Fix i2c bus hang in slave read
Pull clk fixes from Stephen Boyd:
"Three fixes, one for the clk framework and two for clk drivers:
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's
gateclk_ops that was ruining uart output because the divider
was forgotten about"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
clk: socfpga: gate: Account for the divider in determine_rate
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull io_uring fixes from Jens Axboe:
"Fix for an issue reported where reading fdinfo could find a NULL
thread as we didn't properly synchronize, and then a disable for the
IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how
that could lead to deadlocks if the task issued async O_DIRECT writes
and then proceeded to do sync fallocate() calls"
* tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux:
io_uring/rw: disable IOCB_DIO_CALLER_COMP
io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
Fault handler used to make non-trivial calls, so it needed
to set a stack frame up. Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b3312 and that code should
have become
retl - go back to address in %o7
clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter(). Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b3312 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull block fix from Jens Axboe:
"Just a single fix for a potential divide-by-zero, introduced in this
cycle"
* tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux:
blk-throttle: check for overflow in calculate_bytes_allowed
Pull ATA fix from Damien Le Moal:
"A single patch to fix a regression introduced by the recent
suspend/resume fixes.
The regression is that ATA disks are not stopped on system shutdown,
which is not recommended and increases the disks SMART counters for
unclean power off events.
This patch fixes this by refining the recent rework of the scsi device
manage_xxx flags"
* tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: sd: Introduce manage_shutdown device flag
Pull x86 platform driver fix from Hans de Goede:
"A single patch to extend the AMD PMC driver DMI quirk list
for laptops which need special handling to avoid NVME s2idle
suspend/resume errors"
* tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: Add s2idle quirk for more Lenovo laptops
Tetsuo reported the following lockdep splat when the TSC synchronization
fails during CPU hotplug:
tsc: Marking TSC unstable due to check_tsc_sync_source failed
WARNING: inconsistent lock state
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock_irqsave+0x3f/0x60
clocksource_mark_unstable+0x1b/0x90
mark_tsc_unstable+0x41/0x50
check_tsc_sync_source+0x14f/0x180
sysvec_call_function_single+0x69/0x90
Possible unsafe locking scenario:
lock(watchdog_lock);
<Interrupt>
lock(watchdog_lock);
stack backtrace:
_raw_spin_lock+0x30/0x40
clocksource_watchdog+0x23/0x5a0
run_timer_softirq+0x2a/0x50
sysvec_apic_timer_interrupt+0x6e/0x90
The reason is the recent conversion of the TSC synchronization function
during CPU hotplug on the control CPU to a SMP function call. In case
that the synchronization with the upcoming CPU fails, the TSC has to be
marked unstable via clocksource_mark_unstable().
clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is
taken with interrupts enabled in the watchdog timer callback to minimize
interrupt disabled time. That's obviously a possible deadlock scenario,
Before that change the synchronization function was invoked in thread
context so this could not happen.
As it is not crucical whether the unstable marking happens slightly
delayed, defer the call to a worker thread which avoids the lock context
problem.
Fixes: 9d349d47f0 ("x86/smpboot: Make TSC synchronization function call based")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87zg064ceg.ffs@tglx
David and a few others reported that on certain newer systems some legacy
interrupts fail to work correctly.
Debugging revealed that the BIOS of these systems leaves the legacy PIC in
uninitialized state which makes the PIC detection fail and the kernel
switches to a dummy implementation.
Unfortunately this fallback causes quite some code to fail as it depends on
checks for the number of legacy PIC interrupts or the availability of the
real PIC.
In theory there is no reason to use the PIC on any modern system when
IO/APIC is available, but the dependencies on the related checks cannot be
resolved trivially and on short notice. This needs lots of analysis and
rework.
The PIC detection has been added to avoid quirky checks and force selection
of the dummy implementation all over the place, especially in VM guest
scenarios. So it's not an option to revert the relevant commit as that
would break a lot of other scenarios.
One solution would be to try to initialize the PIC on detection fail and
retry the detection, but that puts the burden on everything which does not
have a PIC.
Fortunately the ACPI/MADT table header has a flag field, which advertises
in bit 0 that the system is PCAT compatible, which means it has a legacy
8259 PIC.
Evaluate that bit and if set avoid the detection routine and keep the real
PIC installed, which then gets initialized (for nothing) and makes the rest
of the code with all the dependencies work again.
Fixes: e179f69141 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately")
Reported-by: David Lazar <dlazar@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Lazar <dlazar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003
Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
Pull powerpc fixes from Michael Ellerman:
- Fix boot crash with FLATMEM since set_ptes() introduction
- Avoid calling arch_enter/leave_lazy_mmu() in set_ptes()
Thanks to Aneesh Kumar K.V and Erhard Furtner.
* tag 'powerpc-6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Avoid calling arch_enter/leave_lazy_mmu() in set_ptes
powerpc/mm: Fix boot crash with FLATMEM
The iommu_create_device_direct_mappings() only needs to flush the caches
when the mappings are changed in the affected domain. This is not true
for non-DMA domains, or for devices attached to the domain that have no
reserved regions. To avoid unnecessary cache invalidations, add a check
before iommu_flush_iotlb_all().
Fixes: a48ce36e27 ("iommu: Prevent RESV_DIRECT devices from blocking domains")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Henry Willard <henry.willard@oracle.com>
Link: https://lore.kernel.org/r/20231026084942.17387-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
