[ Upstream commit 4c6a08125f ]
When lots of quota changes are made, there may be cases in which an
inode's quota information is increased and then decreased, such as when
blocks are added to a file, then deleted from it. If the timing is
right, function do_qc can add pending quota changes to a transaction,
then later, another call to do_qc can negate those changes, resulting
in a net gain of 0. The quota_change information is recorded in the qc
buffer (and qd element of the inode as well). The buffer is added to the
transaction by the first call to do_qc, but a subsequent call changes
the value from non-zero back to zero. At that point it's too late to
remove the buffer_head from the transaction. Later, when the quota sync
code is called, the zero-change qd element is discovered and flagged as
an assert warning. If the fs is mounted with errors=panic, the kernel
will panic.
This is usually seen when files are truncated and the quota changes are
negated by punch_hole/truncate which uses gfs2_quota_hold and
gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock
and gfs2_quota_unlock which automatically do quota sync.
This patch solves the problem by adding a check to qd_check_sync such
that net-zero quota changes already added to the transaction are no
longer deemed necessary to be synced, and skipped.
In this case references are taken for the qd and the slot from do_qc
so those need to be put. The normal sequence of events for a normal
non-zero quota change is as follows:
gfs2_quota_change
do_qc
qd_hold
slot_hold
Later, when the changes are to be synced:
gfs2_quota_sync
qd_fish
qd_check_sync
gets qd ref via lockref_get_not_dead
do_sync
do_qc(QC_SYNC)
qd_put
lockref_put_or_lock
qd_unlock
qd_put
lockref_put_or_lock
In the net-zero change case, we add a check to qd_check_sync so it puts
the qd and slot references acquired in gfs2_quota_change and skip the
unneeded sync.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83d0d4cc14 ]
Fixes this compiler warning:
In file included from include/linux/property.h:14,
from include/linux/acpi.h:16,
from drivers/media/pci/intel/ipu-bridge.c:4:
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: warning: '%u' directive output may be truncated writing between 1 and 3 bytes into a region of size 2 [-Wformat-truncation=]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/fwnode.h: In function 'ipu_bridge_connect_sensor':
include/linux/fwnode.h:81:55: note: format string is defined here
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~
In function 'ipu_bridge_init_swnode_names',
inlined from 'ipu_bridge_create_connection_swnodes' at drivers/media/pci/intel/ipu-bridge.c:445:2,
inlined from 'ipu_bridge_connect_sensor' at drivers/media/pci/intel/ipu-bridge.c:656:3:
include/linux/fwnode.h:81:49: note: directive argument in the range [0, 255]
81 | #define SWNODE_GRAPH_PORT_NAME_FMT "port@%u"
| ^~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:384:18: note: in expansion of macro 'SWNODE_GRAPH_PORT_NAME_FMT'
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/pci/intel/ipu-bridge.c:382:9: note: 'snprintf' output between 7 and 9 bytes into a destination of size 7
382 | snprintf(sensor->node_names.remote_port,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
383 | sizeof(sensor->node_names.remote_port),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
384 | SWNODE_GRAPH_PORT_NAME_FMT, sensor->link);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b53e9758a3 ]
The `i3c_master_bus_init` function may attach the I2C devices before the
I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used
before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails,
the DAT `cleanup` will execute before the device is detached, which will
execue DAT `free_entry` function. The above scenario can cause the driver
to use DAT_data when it is NULL.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fafb51a67f ]
The following codes have an implicit conversion from size_t to u32:
(u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once
virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX
instead.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230904061045.510460-1-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6af79f7fe7 ]
Yang Yingliang reported a memleak:
===
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888014aec078 (size 8):
comm "xrun", pid 356, jiffies 4294910619 (age 16.332s)
hex dump (first 8 bytes):
31 2d 30 30 31 63 00 00 1-001c..
backtrace:
[<00000000eb56c0a9>] __kmalloc_track_caller+0x1a6/0x300
[<000000000b220ea3>] kvasprintf+0xad/0x140
[<00000000b83203e5>] kvasprintf_const+0x62/0x190
[<000000002a5eab37>] kobject_set_name_vargs+0x56/0x140
[<00000000300ac279>] dev_set_name+0xb0/0xe0
[<00000000b66ebd6f>] i2c_new_client_device+0x7e4/0x9a0
If device_register() returns error in i2c_new_client_device(),
the name allocated by i2c_dev_set_name() need be freed. As
comment of device_register() says, it should use put_device()
to give up the reference in the error path.
===
I think this solution is less intrusive and more robust than he
originally proposed solutions, though.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Closes: http://patchwork.ozlabs.org/project/linux-i2c/patch/20221124085448.3620240-1-yangyingliang@huawei.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b5c628183 ]
W=1 warns about null argument to kprintf:
In file included from fs/9p/xattr.c:12:
In function ‘v9fs_xattr_get’,
inlined from ‘v9fs_listxattr’ at fs/9p/xattr.c:142:9:
include/net/9p/9p.h:55:2: error: ‘%s’ directive argument is null
[-Werror=format-overflow=]
55 | _p9_debug(level, __func__, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use an empty string instead of :
- this is ok 9p-wise because p9pdu_vwritef serializes a null string
and an empty string the same way (one '0' word for length)
- since this degrades the print statements, add new single quotes for
xattr's name delimter (Old: "file = (null)", new: "file = ''")
Link: https://lore.kernel.org/r/20231008060138.517057-1-suhui@nfschina.com
Suggested-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Message-ID: <20231025103445.1248103-2-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 355f074609 ]
syzbot reported:
| BUG: KCSAN: data-race in p9_fd_create / p9_fd_create
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15599 on cpu 0:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| read-write to 0xffff888130fb3d48 of 4 bytes by task 15563 on cpu 1:
| p9_fd_open net/9p/trans_fd.c:842 [inline]
| p9_fd_create+0x210/0x250 net/9p/trans_fd.c:1092
| p9_client_create+0x595/0xa70 net/9p/client.c:1010
| v9fs_session_init+0xf9/0xd90 fs/9p/v9fs.c:410
| v9fs_mount+0x69/0x630 fs/9p/vfs_super.c:123
| legacy_get_tree+0x74/0xd0 fs/fs_context.c:611
| vfs_get_tree+0x51/0x190 fs/super.c:1519
| do_new_mount+0x203/0x660 fs/namespace.c:3335
| path_mount+0x496/0xb30 fs/namespace.c:3662
| do_mount fs/namespace.c:3675 [inline]
| __do_sys_mount fs/namespace.c:3884 [inline]
| [...]
|
| value changed: 0x00008002 -> 0x00008802
Within p9_fd_open(), O_NONBLOCK is added to f_flags of the read and
write files. This may happen concurrently if e.g. mounting process
modifies the fd in another thread.
Mark the plain read-modify-writes as intentional data-races, with the
assumption that the result of executing the accesses concurrently will
always result in the same result despite the accesses themselves not
being atomic.
Reported-by: syzbot+e441aeeb422763cc5511@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/ZO38mqkS0TYUlpFp@elver.google.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Message-ID: <20231025103445.1248103-1-asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a04224da1f ]
Previously, gadget assignment to the net device occurred exclusively
during the initial binding attempt.
Nevertheless, the gadget pointer could change during bind/unbind
cycles due to various conditions, including the unloading/loading
of the UDC device driver or the detachment/reconnection of an
OTG-capable USB hub device.
This patch relocates the gether_set_gadget() function out from
ncm_opts->bound condition check, ensuring that the correct gadget
is assigned during each bind request.
The provided logs demonstrate the consistency of ncm_opts throughout
the power cycle, while the gadget may change.
* OTG hub connected during boot up and assignment of gadget and
ncm_opts pointer
[ 2.366301] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105
[ 2.366304] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.366306] usb 2-1.5: Product: H2H Bridge
[ 2.366308] usb 2-1.5: Manufacturer: Aptiv
[ 2.366309] usb 2-1.5: SerialNumber: 13FEB2021
[ 2.427989] usb 2-1.5: New USB device found, VID=2996, PID=0105
[ 2.428959] dabridge 2-1.5:1.0: dabridge 2-4 total endpoints=5, 0000000093a8d681
[ 2.429710] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[ 2.429714] dabridge 2-1.5:1.0: Hub 2-2 P(0151) V(06.87)
[ 2.429956] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 2.430093] gadget 000000003c414d59 ------> gadget pointer
* NCM opts and associated gadget pointer during First ncm_bind
[ 34.763929] NCM opts 00000000aa304ac9
[ 34.763930] NCM gadget 000000003c414d59
* OTG capable hub disconnecte or assume driver unload.
[ 97.203114] usb 2-1: USB disconnect, device number 2
[ 97.203118] usb 2-1.1: USB disconnect, device number 3
[ 97.209217] usb 2-1.5: USB disconnect, device number 4
[ 97.230990] dabr_udc deleted
* Reconnect the OTG hub or load driver assaign new gadget pointer.
[ 111.534035] usb 2-1.1: New USB device found, idVendor=2996, idProduct=0120, bcdDevice= 6.87
[ 111.534038] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.534040] usb 2-1.1: Product: Vendor
[ 111.534041] usb 2-1.1: Manufacturer: Aptiv
[ 111.534042] usb 2-1.1: SerialNumber: Superior
[ 111.535175] usb 2-1.1: New USB device found, VID=2996, PID=0120
[ 111.610995] usb 2-1.5: new high-speed USB device number 8 using xhci-hcd
[ 111.630052] usb 2-1.5: New USB device found, idVendor=2996, idProduct=0105, bcdDevice=21.02
[ 111.630055] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 111.630057] usb 2-1.5: Product: H2H Bridge
[ 111.630058] usb 2-1.5: Manufacturer: Aptiv
[ 111.630059] usb 2-1.5: SerialNumber: 13FEB2021
[ 111.687464] usb 2-1.5: New USB device found, VID=2996, PID=0105
[ 111.690375] dabridge 2-1.5:1.0: dabridge 2-8 total endpoints=5, 000000000d87c961
[ 111.691172] dabridge 2-1.5:1.0: P(0105) D(22.06.22) F(17.3.16) H(1.1) high-speed
[ 111.691176] dabridge 2-1.5:1.0: Hub 2-6 P(0151) V(06.87)
[ 111.691646] dabridge 2-1.5:1.0: All downstream ports in host mode
[ 111.692298] gadget 00000000dc72f7a9 --------> new gadget ptr on connect
* NCM opts and associated gadget pointer during second ncm_bind
[ 113.271786] NCM opts 00000000aa304ac9 -----> same opts ptr used during first bind
[ 113.271788] NCM gadget 00000000dc72f7a9 ----> however new gaget ptr, that will not set
in net_device due to ncm_opts->bound = true
Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Link: https://lore.kernel.org/r/20231020153324.82794-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6add6dd345 ]
There is a 120ms delay implemented for allowing the XHCI host controller to
detect a U3 wakeup pulse. The intention is to wait for the device to retry
the wakeup event if the USB3 PORTSC doesn't reflect the RESUME link status
by the time it is checked. As per the USB3 specification:
tU3WakeupRetryDelay ("Table 7-12. LTSSM State Transition Timeouts")
This would allow the XHCI resume sequence to determine if the root hub
needs to be also resumed. However, in case there is no device connected,
or if there is only a HSUSB device connected, this delay would still affect
the overall resume timing.
Since this delay is solely for detecting U3 wake events (USB3 specific)
then ignore this delay for the disconnected case and the HSUSB connected
only case.
[skip helper function, rename usb3_connected variable -Mathias ]
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-20-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5e80e18f2 ]
If NAT is corrupted, let scan_nat_page() return EFSCORRUPTED, so that,
caller can set SBI_NEED_FSCK flag into checkpoint for later repair by
fsck.
Also, this patch introduces a new fscorrupted error flag, and in above
scenario, it will persist the error flag into superblock synchronously
to avoid it has no luck to trigger a checkpoint to record SBI_NEED_FSCK
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e72fc8d6a1 ]
In Synopsys's dwc3 data book:
To avoid underrun and overrun during the burst, in a high-latency bus
system (like USB), threshold and burst size control is provided through
GTXTHRCFG and GRXTHRCFG registers.
In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
connected with USB 2.5G Ethernet, there will be overrun problem.
Therefore, setting TX/RX thresholds can avoid this issue.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230912041904.30721-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c35ac1825 ]
This is not needed when firmware connection manager is run so limit this
to software connection manager.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dab48b8f2f ]
After repairing a corrupted file system with exfatprogs' fsck.exfat,
zero-size directories may result. It is also possible to create
zero-size directories in other exFAT implementation, such as Paragon
ufsd dirver.
As described in the specification, the lower directory size limits
is 0 bytes.
Without this commit, sub-directories and files cannot be created
under a zero-size directory, and it cannot be removed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33fc506d2a ]
In the scenario where the accelerator business is fully loaded.
When the workqueue receiving messages and performing callback
processing, there are a large number of messages that need to be
received, and there are continuously messages that have been
processed and need to be received.
This will cause the receive loop here to be locked for a long time.
This scenario will cause watchdog timeout problems on OS with kernel
preemption turned off.
The error logs:
watchdog: BUG: soft lockup - CPU#23 stuck for 23s! [kworker/u262:1:1407]
[ 1461.978428][ C23] Call trace:
[ 1461.981890][ C23] complete+0x8c/0xf0
[ 1461.986031][ C23] kcryptd_async_done+0x154/0x1f4 [dm_crypt]
[ 1461.992154][ C23] sec_skcipher_callback+0x7c/0xf4 [hisi_sec2]
[ 1461.998446][ C23] sec_req_cb+0x104/0x1f4 [hisi_sec2]
[ 1462.003950][ C23] qm_poll_req_cb+0xcc/0x150 [hisi_qm]
[ 1462.009531][ C23] qm_work_process+0x60/0xc0 [hisi_qm]
[ 1462.015101][ C23] process_one_work+0x1c4/0x470
[ 1462.020052][ C23] worker_thread+0x150/0x3c4
[ 1462.024735][ C23] kthread+0x108/0x13c
[ 1462.028889][ C23] ret_from_fork+0x10/0x18
Therefore, it is necessary to add an actively scheduled operation in the
while loop to prevent this problem.
After adding it, no matter whether the OS turns on or off the kernel
preemption function. Neither will cause watchdog timeout issues.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cb5478839 ]
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89db0793c9 ]
Update dw_pcie_link_set_max_link_width() to set PCI_EXP_LNKCAP_MLW.
In accordance with the DW PCIe RC/EP HW manuals [1,2,3,...] aside with
the PORT_LINK_CTRL_OFF.LINK_CAPABLE and GEN2_CTRL_OFF.NUM_OF_LANES[8:0]
field there is another one which needs to be updated.
It's LINK_CAPABILITIES_REG.PCIE_CAP_MAX_LINK_WIDTH. If it isn't done at
the very least the maximum link-width capability CSR won't expose the
actual maximum capability.
[1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.60a, March 2015, p.1032
[2] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.70a, March 2016, p.1065
[3] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 4.90a, March 2016, p.1057
...
[X] DesignWare Cores PCI Express Controller Databook - DWC PCIe Endpoint,
Version 5.40a, March 2019, p.1396
[X+1] DesignWare Cores PCI Express Controller Databook - DWC PCIe Root Port,
Version 5.40a, March 2019, p.1266
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9a1bcba90 ]
This is a preparation before adding the Max-Link-width capability
setup which would in its turn complete the max-link-width setup
procedure defined by Synopsys in the HW-manual.
Seeing there is a max-link-speed setup method defined in the DW PCIe
core driver it would be good to have a similar function for the link
width setup.
That's why we need to define a dedicated function first from already
implemented but incomplete link-width setting up code.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d15f18053e ]
Placing PCI error code check inside "if" condition usually results in need
to split lines. Combined with additional conditions the "if" condition
becomes messy.
Convert to the usual error handling pattern with an additional variable to
improve code readability. In addition, reverse the logic in
pci_find_vsec_capability() to get rid of &&.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: PCI_POSSIBLE_ERROR()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28742447c ]
In get_esi() PCI errors are checked inside line-split "if" conditions (in
addition to the file not following the coding style). To make the code in
get_esi() more readable, fix the coding style and use the usual error
handling pattern with a separate variable.
In addition, initialization of 'error' variable at declaration is not
needed.
No functional changes intended.
Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b015001487 ]
Place IRQ handlers such as gic_handle_irq() in the irqentry section even
if FUNCTION_GRAPH_TRACER is not enabled. Without this, the stack
depot's filter_irq_stacks() does not correctly filter out IRQ stacks in
those configurations, which hampers deduplication and eventually leads
to "Stack depot reached limit capacity" splats with KASAN.
A similar fix was done for arm64 in commit f6794950f0
("arm64: set __exception_irq_entry with __irq_entry as a default").
Link: https://lore.kernel.org/r/20230803-arm-irqentry-v1-1-8aad8e260b1c@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46a0a2c96f ]
Built-in firmware of cptkbd handles scrolling by itself (when middle
button is pressed) but with issues: it does not support horizontal and
hi-res scrolling and upon middle button release it sends middle button
click even if there was a scrolling event. Commit 3cb5ff0220 ("HID:
lenovo: Hide middle-button press until release") workarounds last
issue but it's impossible to workaround scrolling-related issues
without firmware modification.
Likely, Dennis Schneider has reverse engineered the firmware and
provided an instruction on how to patch it [1]. However,
aforementioned workaround prevents userspace (libinput) from knowing
exact moment when middle button has been pressed down and performing
"On-Button scrolling". This commit detects correctly-behaving patched
firmware if cursor movement events has been received during middle
button being pressed and stops applying workaround for this device.
Link: https://hohlerde.org/rauch/en/elektronik/projekte/tpkbd-fix/ [1]
Signed-off-by: Mikhail Khvainitski <me@khvoinitsky.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64933ab7b0 ]
Both db_maxag and db_agpref are used as the index of the
db_agfree array, but there is currently no validity check for
db_maxag and db_agpref, which can lead to errors.
The following is related bug reported by Syzbot:
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20
index 7936 is out of range for type 'atomic_t[128]'
Add checking that the values of db_maxag and db_agpref are valid
indexes for the db_agfree array.
Reported-by: syzbot+38e876a8aa44b7115c76@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=38e876a8aa44b7115c76
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
